saws used for sale (1,283)

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" colo ...

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable ...

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

Sägeblatt-Ø: 315 mmcutting diameter: 100 mmsawblade width: 2,5 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 130 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 100 x 90 mmturning speeds: 18 + 36 U/minvoltage: 400 Vfrequency: 50 Hzpower capacity: 0,75 - 1,3 kWweight of the machine ca.: 220 Kgrange L-W-H: 0,7 x 0,6 x 1,3, m• mitre possibility by adjustment of the sawhead,• self-scrolled vise, self-ajdustable protection cover,• cooling pump with bin,• 2 steps of cutting speed• with under frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sägeblatt-Ø: 315 mmcutting diameter: 100 mmsawblade width: 2,5 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 130 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 100 x 90 mmturning speeds: 18 + 36 U/minvoltage: 400 Vfrequency: 50 Hzpower capacity: 0,75 - 1,3 kWweight of the machine ca.: 220 Kgrange L-W-H: 0,7 x 0,6 x 1,3, m• mitre possibility by adjustment of the sawhead,• self-scrolled vise, self-ajdustable protection cover,• cooling pump with bin,• 2 steps of cutting speed• with under frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

: 36/72 m/min: 285 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 230 mmcapacity 90 degrees: flat: 280x200 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: square: 180 mmcapacity 45 degrees: flat: 180x180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 110 mmcapacity 60 degrees: flat: 110x110 mmdimensions of saw-band: 2950 x 27 x 0,9 mmoutput: 1,5 / 1,8 kWWeight: 435 kgdimensions: 1700x1000x1840 mmSemi-automatic function:- Vice closes and engine starts- Saw head lowers for the cut- Engine shuts off- Saw head lifts - vise opensThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Westphal Mechanics C7x Commutator Slot Center Machine No. M64127 Year of construction: 09/2019 The commutator slot center has four processing steps. In the steps, the following components are approached: Contact slot saw Insulating groove saw Deburrs Brush The Stäubli TS 80 Robotor with SP1 control has two grippers that transmit the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC More information via this link. Further technical data will follow shortly. The roller straightening unit is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves,  ...

saw blade diameter: 1250 mmcutting diameter: 380 mmcutting range: 480x320 mmmotor speeds:: 3000 U/minfeed speeds: 1000 mm/minmain drive motor: 112 kWchip conveyor: cutting speed: 10-265 m/mintotal power requirement: 125 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mmsaw band length: 8200 mmcutting width: mmControl: total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4020 x1630 x 2570 mmBrand: BMSYType: 810 CGHYear of make: 2019Capacity round 45º: 555 mm øCapacity round 60º: 320 mm øCapacity round 90º: 810 mm øCapacity square 45º: 700 mmCapacity square 60º: 310 mmCapacity square 90º: 770 mmCapacity rectangular 45º: 555 x 770 mmCapacity rectangular 60º: 310 x 770 mmCapacity rectangular 90º: 810 x 770 mmMitre: 60 °Saw blade dimension: 8.200 x 41 x 1,3 mmSaw speed: 20 - 100 m/minSaw motor: 4 kWMachine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mmMachine weight: 3.970 kgCap. 30 ° round: 700 mm øCap. 30 ° straight: 700 x 770 mmCap. 30 ° square: 700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1020 mmsaw band length: 9500 mmcutting width: mmControl: total power requirement: 7,5 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 4500 x 1700 x 2750 mmBrand: BMSYType: 1020CYear of make: 2019Capacity round 90º: 1.020 mm øCapacity square 90º: 1.020 mmCapacity rectangular 90º: 1.020 x 1.020 mmMitre: 45 °Working height: 535 mmSaw blade dimension: 9.500 x 54 x 1,6 mmSaw motor: 7,5 kWMachine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mmMachine weight: 6.950 kgClamp: 1 x 45 ° adjustableHydraulic clamping including top clampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315 mmcutting diameter: 85 mmstroke: mmmitter cutting - all-position: ± 45 °turning speed range: 19 / 38 1/minpower requirement: 0,75 / 1,5 kWcoolant: voltage: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 235 kgdimensions of the machine ca.: 0,55 x 0,90 x 1,75 m- Coolant device- Machine base- without circular saw bladeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 230 mmcutting speed: 25 - 80 m/mindimensions of saw-band: 2455 x 27 x 0,9 mm: 90 mm: 90 mm: 90 x 100 mm: 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mmstroke back stop: 210 mmcross-slide: 230 x 185 total power requirement: 1,2 kWweight of the machine ca.: 0,24 tdimensions of the machine ca.: 1,2 x 0,6 x 1,7 mMiter cuts to 60 ° left- cutting speed 35/70 m / min.- Vice with rapid clamping device- Bandsaw blade guide made of hard metal- Band tension control- Electric cooling automatic.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 105 mmcapacity 90 degrees: flat: 180 x 70 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 135 x 60 mmsaw blade turning speeds: 1700 / 3400 U/mintotal power requirement: 1,5/2,2 kWweight of the machine ca.: 0,210 tdimensions: 0,9 x 1,4 x 1,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 230 mm: 230 x 230 mmsaw band length: 2950 x 27 x 0,9 mmtable height: mmband speed: 15 - 100 m/mintotal power requirement: 2,2 kWweight of the machine ca.: 1,2 tdimensions: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 25 - 90 m/mintotal power requirement: 1,1 / 1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 x 250 mmcapacity 60 degrees: flat: 170 x 170 mmcapacity 60 degrees: square: 170 x 170 mmcapacity 60 degrees: round: 180 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3320 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mmcapacity 90 degrees: square: 450 mm: 650x450 band speed: 15 - 100 m/mintable height: 844 mmdimensions of saw-band: 5320 x 34 x 1,1 mmtotal power requirement: 3,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 1,9 x 2,87 x 1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm: 350 x 350 mmsaw band length: 4640 x 34 x 1,1 mmtable height: mmband speed: 15 - 115 m/mintotal power requirement: 4,0 kWweight of the machine ca.: 2,8 tdimensions: 3,1 x 2,2 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 + 70 m/mintotal power requirement: 1,1 / 1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcapacity 90 degrees: round: 110 mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 200x60 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 140x60 mmtotal power requirement: 1,5 kWweight of the machine ca.: 130 tdimensions: 0,8 x 0,7 x 1,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350x200 saw band length: 3375x27x0,9 mmband speed: 18 - 100 m/mintable height: 940 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,65 tdimensions of the machine ca.: 1,5 x 1,75 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mmcapacity 90 degrees: square: 260 mm: 350x200 saw band length: 3375x27x0,9 mmband speed: 37 + 74 m/mintable height: 940 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,65 tdimensions of the machine ca.: 1,5 x 1,75 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 130 mmcapacity 90 degrees: square: 130 mm: 130 x 125 dimensions of saw-band: 1440 x 13 x 0,65 mmdimensions: 350 x 690 x 520 mband speed: 30 - 80 m/mintotal power requirement: 1,2 kWweight of the machine ca.: 19 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mm: 180 x 100 mmWorking height: 925 mmsaw blade turning speeds: 15 - 150 U/mintotal power requirement: 5,5 kWweight of the machine ca.: 0,615 tdimensions of the machine ca.: 1,4 x 1,4 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 950 mmband speed: 18 - 110 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,42 tdimensions of the machine ca.: 1,23 x 1,7 x 1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.