Manufacturer:
(Category: 105)
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
- engine power: 1.1 kW - dial diameter: 300 mm - cut from below - cutting at an angle of -45 °, 90 °, + 45 °, intermediate angles set manually - vertical pneumatic pressure - protective cover - cooling installation
Sawing capacity: 280 mm round / 330 mm square Sawing capacity 45º: 250 mm round / 250 mm square Sawing speed: 40/80 mtr.min. Band saw blade: 3,320 x 27 x 0.9 mm Saw angle: 0 - 60º Equipped with: - Cooling system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm
YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made
saw blade diameter: 275 mmcutting diameter: 90 mmcapacity 45 degrees: flat: 150 x 100 mmmitter cutting - all-position: 45 °cutting speed: 16/32 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 810 mmsaw band length: 9500 x 54 x 1,6 mmcutting width: 1020 mmcutting capacity - flat: 1020 x 1020 mmcutting capacity - round: 1020 mmspeed: 20 - 100 m/minsawing motor: 4 kWhydraulic motor: 2,2 kWtotal power requirement: 7,5 kWweight of the machine ca.: 5860 kgdimensions of the machine ca.: 4500 x 1700 x 2750 mmAccessories:• Inverter• hydraulical vice• automatical movement to the top via hydraulical cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 810 mmsaw band length: 8200 x 41 x 1,3 mmcutting width: 810 mmcutting capacity - flat: 480 x 850 / 45° mmcutting capacity - round: 480 / 45° mmspeed: 20 - 100 m/minsawing motor: 4 kWtotal power requirement: 6 kWweight of the machine ca.: 3100 kgdimensions of the machine ca.: 3000 x 1200 x 2350 mmAccessories:• Inverter• hydraulical vice• automatical movement to the top via hydraulical cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
very stable automatic with protective lock and max. 275 saw blade
capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 165 x 210 mm: 195 mm: 185 x 185 mm: 130 x 190 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 85 x 85 mmcapacity 60 degrees: flat: 85 x 120 mmMotor output: 1,2 kW: 170 mm: 145 x 145 mm: 60 x 195 mmcutting speed: 36 + 72 m/mindimensions of saw-band: 2725 x 27 x 0,9 mm: 315 mmwork height max.: 900 mmWeight: 330 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw band length: 4400 x 34 x 1,1 mmband speed: 15 - 150 m/mincapacity 90 degrees: square: 500 x 335 mmcapacity 90 degrees: round: 335 mm: 330 mm: 320 x 335 mm: 305 mm: 305 x 335 mm: 180 mm: 170 x 335 mmwork height max.: 750 mmMotor Capacity: 3 kWmachine weight ab.: 1320 kgdimensions: 1450 x 2350 x 1950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 220 mmcapacity 90 degrees: square: 210x210 mmcapacity 90 degrees: flat: 230x185 mm: 150 mm: 150x150 mm: 150x210 mm: 90 mm: 90x90 mm: 90x100 mmdimensions of saw-band: 2450x27x0,9 mmcutting speed: 35/70 m/minwork height max.: 915 mm: 265 mmtotal power requirement: 1,2 kWweight of the machine ca.: 240 kgdimensions of the machine ca.: 1550x870x1740 mmZimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position.Standard features:- Hydraulic cylinder- emulsion pump- Eccentric tensioner- Underframe- saw blade- 400V plug 16AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.
FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER
Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg
S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131
table-size: 670 x 670 mmthroat: 1030 mmworkpiece height: max. 300 mmsaw band length: min. 4700 mmsaw band length: max. 4800 mmtotal power requirement: kWweight of the machine ca.: 1,0 tAccessories: saw band welding and grinding attachment- table swivelling left / right- hydr. feed in tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg
cutting diameter: rund 250 mmcutting diameter: vierkant 230 mmcutting diameter: flach 280 x 200 mmdimensions of saw-band: 2950 x 27 x 0,9 mmsawing stroke: 290 mmweight of the machine ca.: 610 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 170 mmdimensions of saw-band: 2080 x 20 x 0,9 mmtable height: 880 mmcutting speed: 40 + 80 m/min: 170 mm: 125 mm: 150 x 190 mm: 95 x 120 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,24 tDimensions (LxWxH): 870 x 1.550 x 1.740 mm mmMiter band sawDemonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: kWweight of the machine ca.: 0,35 tThe Z252/DG has the following equipment:- hydraulic cylinder,- emulsion pump,- eccentric clamp,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 950 mmband speed: 18 - 110 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,42 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 950 mmband speed: 35 + 70 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,42 tdimensions of the machine ca.: 1,23 x 1,7 x 1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWvice: 340 mmweight: 1240 kgdimensions: 2020x2040x1740 mmElectro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - repeatable to ...
- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg
Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg
High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg
UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg
Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" colo ...
Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable ...
