Manufacturer:
(Category: 105)
Key data: 500 mm
Aluminium circular saw, semi-automatic aluminium underfloor circular saw for mitre cuts 0 to 67.5 degrees to the left and right - Machine with solid cast construction - Large solid rotary table - 7 main angles with fixed stops - Mitre 0 to 67.5 degrees left and right - 2 pneumatic vertical and horizontal vises - Two-hand safety control - Infinitely adjustable saw blade feed Great condition, machine hardly used. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Saw blade: 500 mm Colour: blue/yellow Total power requirement: 380 V Weight: 550 kg Dimensions: 1140 x 1150 x 1740 mm Speed min./max.: 2860 Cutting area at 90 degrees square 160 x 160 mm Cutting area at 90 degrees rectangular 260 x 100 mm Cutting area at 45 degrees square 145 x 145 mm Cutting area at 45 degrees rectangular 185 x 100 mm Angle a ...
Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.
GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. ...
GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...
Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant systemfor all kind of metals, steels and Nirosta, quick clamping viceautomatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability.CE conformTechnical Data:Motor: 400V,50HzReduce gear rate: 25:1 Wheel diameter: 380mmBlade size: 3160x27x0.9mmBlade speed: 34 or 68 m/minCutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°RCoolant pump: 400V, 50Hz, 3~, 25WPacking size: 1770x765x1120mmWeight: 365 kg
Demonstration machineYear of manufacture 2021Hans Schreiner metal band saw with swivel arm, for professionals, with soft hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel. Quick-release vise. Choice of automatic operation and manual operation can be easily switched. Automatic belt shutdown, price with base, reinforced frame for more stability, CE compliantTechnical data:Motor output power up to 1.9kW S6 (1.5kW S1)
Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm
cutting diameter: - mmsaw band length: - mmcutting width: - mmtable - swivable: ja Gradweight of the machine ca.: 200 kgdimensions of the machine ca.: - mwith welding equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm
For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible.
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm
Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200
Key data: 400 mm, 4800 mm, 870 mm
Metora MBS 400 - Metal Band Saw - Hydraulically controlled lowering of the saw frame - Hydraulic raising of the saw frame - Mounted on turntable Specifications - Capacity: 400 mm - Working height: 870 mm - Saw blade dimensions: 4800 x 34 x 1.1 mm - Motor power: 3.2 kW - Machine dimensions WxHxD: 2600 x 1550 x 1200 mm - Weight: approx. 1300 kg
Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg
Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg
Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting
new
cutting diameter: 440 mmsaw band length: 5200 x 34 x 1,1 mmcutting width: 610 mmcutting capacity - flat: 440 x 500 / 30° mmcutting capacity - round: 440 /30° mmcutting capacity - square: 440 x 440 / 30° mmcutting capacity - flat: 440 x 410 /45° mmcutting capacity - round: 410 /45° mmcutting capacity - square: 410 x 410 / 45° mmcutting capacity - flat: 440 x 250 /60° mmcutting capacity - round: 320 / 60° mmcutting capacity - square: 250 x 250 / 60° mmcutting capacity - flat: 440 x 610 / 90° mmcutting capacity - round: 440 / 90° mmcutting capacity - square: 440 x 440 / 90° mmspeed: 20 - 100 m/minsawing motor: 3 kWhydraulic motor: 1,1 kWcoolant pump: 0,12 kWvoltage: 400 V / 50 Hztotal power requirement: 4,3 kWweight of the machine ca.: 1,54 tdimensions of the machine ca.: 3000 x 1200 x 2000 mmInverterHydraulic viceSaw blade at an angle of 3°Digital display of the angleHydraulic ...
Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional
Dimensions (L/W/H): 9000x1400x1680 mmWeight: 1600 kgTotal power requirement: 7,5 kw- Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2800x1150x1950 mmWeight: 430 kgTotal power requirement: 8,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 10000x2500x1600 mmWeight: 3300 kgTotal power requirement: 16,2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1000x1500x1800 mmWeight: 570 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6900x1750x1660 mmWeight: 450 kgTotal power requirement: 4,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 6530x1150x2980 mmWeight: 900 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 5000x1150x2980 mmWeight: 665 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
