Manufacturer:
(Category: 105)
roll diameter: 420 mmthroat: 400 mmworkpiece height: 280 mmsaw band length: 3200 - 3400 mmtable surface area: 600 x 500 mmtotal power requirement: 1,7 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1 x 0,7 x 1,9 mfrom Repair ShopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 450 mmcutting diameter: 150 mmstroke: mmtotal power requirement: 4 kWweight of the machine ca.: 1,05 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg
saw blade diameter: 350 mmdimensions of saw-blade: 350 x 30 x 50 mmmachine weight ab.: 100 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: mmcutting diameter: mmstroke: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: mmcutting diameter: mmstroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 560/660/710 mmcutting diameter: 170/220 mmcutting range: 1000 x 220 mmcutting speed: 7- 48 m/minclamping devices hydraulic pneumatic: 20- 315 mmdimensions: 2,9 x 2,2x 1,95 mtotal power requirement: kWweight of the machine ca.: 2,8 tUsed plate saw- part fixures- new security componens- external control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.
roll diameter: 500 mmthroat: B485/H350 mmtable-size: 700x600 mmcutting speed: 15-940 m/minweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1200x800x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible.
CONTROLS PLC TECHNICAL SPECIFICATION max. cutting height: 360 mm sawband length: 5334 mm sawband width: 41 mm max. bar feed (single stroke): 600 mm cutting speed min.: 14 m/min cutting speed max.: 102 m/min power of band drive: 5.5 kWELECTRICAL SPECIFICATIONS total power consumption: 10 kWDIMENSIONS / WEIGHTS space requirements -left/right-: 2840 mm space requirements -front/back-: 2800 mm total height: 2130 mm total weight approx.: 2540 kg
Max. saw blade diameter: 400 mm Pneumatic material tensioners
roll diameter: 420 mmthroat: 405 mmworkpiece height: 380 mmcutting speed: 16 - 2200 m/mintable surface area: 615 x 615 mmsaw band length: 3450/3650x6-20x0,9 mmwork height max.: 955 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 470 kgdimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition ()Features:- Robust, vertical band saw machine- Frequency-controlled, infinitely variable belt drive- Belt guide height adjustment with hand wheel- IDEAL belt welding system, with shears and grinding motor- Swivel table 15°/45°- Machine base- Swiveling machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mFully automatic hydropneumatic machine· Left/right miter cuts· Head bevel cuts up to 45° (shifter)· Material feed unit with material clamp· Integrated coolant spray system· MPS control:· Saves cut start/end times· Displays power consumption, workpiece count, cutting time, etc.· Adjustable water cooling· Cutting pressure regulatorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw band length: 3.000 mmmax. workpiece height: 215 mmtable-size: 605 x 605 mmcutting speed: 12 - 750 m/mintransmission ratio: 4 throat: 410 mmturning speed range: 39 - 2.460 U/mintotal power requirement: 2 kVAweight of the machine ca.: 0,6 tdimensions of the machine ca.: 2,0 x 2,0 x 2,5 mBandsawMÖSSNER - Rekord SM 420- Operating Hours: 2.651 h- Table swivable- incl. LISTA Table- incl. replacement saw blades:1x 30,000 x 13 x 0.65mm4x 30,000 x 6 x 0.65mm1x 15m (6H) 13 x 0.9mm1x 15m (10H) 13x 0.9mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mUnused display machine2-column high-performance automatic band saw from the SBS series• Modern SNC 20 control system for CNC models• Frequency-controlled saw drive• Work light• Powered chip brush• Hydraulic band tensioning• Clamping pressure adjustment• Double vise (before and after the band)• Creep speed for positioning• Bundle tensioning, electrically and hydraulically prepared• Chip conveyorThe SNC 20 control system allows for convenient and uncomplicated input ofup to 20 different sawing tasks (length and quantity). When thetarget dimension is entered, the control system automatically calculates the saw waste and the number offeeds. In addition, the error code di ...
capacity 90 degrees: round: 350 mmcapacity 90 degrees: square: 350 mmdimensions of saw-band: 4640x34,1,1 mm: 355 mmsawband speed: 15-115 m/minweight of the machine ca.: 2800 kgdimensions of the machine ca.: 3050x2190x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With saw blade welder Ideal BS0/16 with band shears and whetstone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very neat condition
Key data: 400 mm
gebr. V. Bandsäge Fabr. Bauer (with only about 50 operating hours) incl. welding device for the saw blades Saw blade rollers diameter 400 mm Saw blade length 3000 mm Table size 520 x 470 mm Dimensions: 600 x 700 x 1800 mm Weight approx. 280 kg
V. Bandsäge, Fabr. Elektra Beckum, Type BAS 315/4 Year of Make: 1994 Projection 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: saw blades, length stop, angle adjustment for mitre cuts
Bernardo Specifications Cutting range around 90° 125 mm Cutting area flat 90° 100 x 150 mm Cutting range around 45° 95 mm Cutting area flat 45° 95 x 76 mm Cutting range around 60° 50 mm Cutting area flat 60° 50 x 56 mm Working height 730 mm Saw blade dimensions 1638 x 13 x 0.65 mm Cutting speeds 23 / 34 / 54 m/min Engine output S1 100% 0.55 kW Motor input power S6 40% 0.75 kW Voltage 230 V Machine dimensions (L x W x H) 1000 x 550 x 1100 mm Weight approx. 68 kg
1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions
Key data: 670 mm
Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg
Key data: 280 mm
Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...
Feature VMS II Cut at 90° (flat) approx. 140 × 70 mm Cut at 90° (round) approx. 80 mm Cut at 45° approx. 100 × 70 mm (flat), round: 80 mm Speed 40/80 rpm Coolant available Power approx. 1.4 kW (up to 2 kW) Weight approx. 400 kg (depending on version: 270–500 kg) Dimensions (L×W×H) approx. 1.0 × 0.75 × 1.6 m
Key data: 400 mm
Saw blade diameter 400 mm Cutting diameter 130 mm Cutting area at 90 degrees: square 120 x 120 mm Cutting area at 90 degrees: flat 220 x 80 mm Feed length 600 mm Feed length multiple 1800 mm Cutting speed 10/13/15/20/26/30 m/min Miter cuts -/+ grade 60 Total power requirement 5.5 kW Machine weight approx. 2,600 kg - with mitre adjustment +/- 60 ° with digital display - Accessories: roller track, documentation, various circular saw blades
Key data: 300 mm
Saw blade diameter max. 300 mm Speed setting 2 levels: 17 and 33 rpm. Weight 450 kg
The machine is from the year of construction 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round – 75 mm Rectangle – 60 mm Saw blade dimensions approx. ø 285 x 2.0 (D) x 1.7 (t) mm T = Waste; t = strength ; Hole 32; 4x11 at 63 mm Blade speed inverter monitors 30- 150 rpm Blade motor 7.5 kW Hydraulic system 1.5 kW Coolant system Oil mist lubrication Blade feed system servo motor and ball screw Material support 1,200 x 5,200 mm Bar feed: servo motor and ball screw Automatic index single stroke 6 – 600 mm Multiple stroke up to 3,000 mm Automatic Chip Conveyor Chain Conveyor Machine weight, incl. table 2,800 kg Length tolerance +/- 0.1 mm Cutting accuracy +/- 0.1 mm Remnant Standard 75 mm Loading capacity 13 x ø 75 mm rods Max loading width. 1,000 mm Accessories: Chip conveyor, air purification, loading magazine (still under power ...
