saws wood used for sale (1,069)

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

I sell a vertical panel saw standing with vorritzer GMC KGS400E, built in 2007, as good as new. Cutting surface 4500x2100mm Engine 3kW. Sawing unit swivel 0-90° Main saw blade diameter 240-250mm / 5200rpm. With vorritzer 104-110 x 20mm / 7000rpm. Manual cutting. Weight 665kg. Condition as new. Available the same.

see pdf attached

Pendulum circular saw Irion with roller conveyor Cutting height 100 mm Roller conveyor left 2m Roller conveyor right 3.5 m L x W x H: with roller conveyor 6.0 x 1.2 x 1.5 m Weight approx. 450 kg Year of construction 1965 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

cutting range: 90°: 90 mmcutting range: 45°: 75 mmSaw blade diameter: 315 mmTable dimensions: 800 x 500/400 mmSaw blade: 30 mmmachine weight ab.: 45 kgdimensions: 850 x 600 x 430 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 700 mmCutting height: 420 mmcutting width: 680 mmMotor output: 3 kWTable dimensions: 695 x 990 mmTable tiltable: 45 GradDimensions (L/W/H): 1260x840x2270 mmmachine weight ab.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 205 mmMotor output: 11 kWcutting width: 450 mmCutting length: 5200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mmCutting height: 380 mmcutting width: 570 mmMotor output: 2,2 kWTable dimensions: 810 x 590 mmtable height: 905 mmvoltage: 400 V / 50 Hz range L-W-H: 1120 x 750 x 2125 mmWeight: 275 kgDust suction hood: 2 x 100 mmband speed: 1550 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 500 mmCutting height: 330 mmcutting width: 480 mmMotor output: 1,5 kWTable dimensions: 495 x 670 mmTable tiltable: 45 GradThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Key data: 4200 , 2200

PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support f ...

Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking

Weibert WJ-K315 Format circular saw Format sliding table: 2550mm Engine power: 4 KW (5.5 hp), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm swivel: 90°-45° WJ-800100

HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg

Weibert BS 610 Wooden band saw Work table: 650 x 800mm Cutting height 360mm Swivel -15° +45° Engine power 4 KW Bandwidth: 6 to 40mm Band length 4900mm Suction nozzle 2x 100mm WJ-X00610 mel k options: Table swivel with handwheel adjustment Miter attack 5 KW motor Driving equipment Circular cutting device

Sagegatter Esterer HDE 71 pass 710 motor 55kw chip car auxiliary car spaltkail

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Abbund Chain Saw Sauer ZKS 2033 Sword length 330 mm a replacement chain plus chain wrench available Built in 2008 This blow chain saw was little used and looks almost like new. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table circular saw Schelling SKR with SUVA protection with stop Bösch L x W x H: 2200 x 1800 x 1100 mm Weight approx. 750 kg Built in 1973 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Automatic optimization crosscut saw: Technical data: Follow later!

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

Double Mitre Saw Manufacturer: Duespohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°

Pendulum circular saw Irion Cutting width 350 mm Roller table 3000 mm L x W x H: 600 x 500 x 1800 mm Weight approx. 250 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

Cutting and miter saw • Saw blade diameter: 420 mm • Saw blade holder: 40 mm • Cutting length: 410 mm (at 90°) • Cutting height: 170 mm (at 90°) • Machine can be swivelled on both sides via hand crank (from 90° to left by 45° and from 90° to right by 30° to max. 60°) • HM circular saw blade for wood (420 x 3.4/2.4 x 40 mm 48 WZ neg) • stable cast iron construction • Precise ball bush guidance of the tool slide on hardened and ground steel shafts • Saw feed manually • Miter range horizontal: 45° - 90° - 25° • Miter range vertical: 90° to 45° (left) • re-adjustable fixed stops • Lower saw blade protection can be connected to a suction system (diameter suction nozzle = 100 mm) • incl. machine stand for type 170 N • Weight: 120 kg Engine data: • Power: 3 kW • Speed: 2710 rpm • Voltage: 400/230 V • Rated current: 6.4 ...

Complete gate system Sagegatter mohringer oss71 with bv built in 1989 read through 710mm hub 500mm hydraulic sagespanner remote-gesteurchipwagen spe's round wood on givee rolengang with mechanicization