used Cut-off saws for sale

Untersich Cross-cut saw Agazzani T19 Year of construction 2005 S/N 12209 Pneumatic drive of the blade. • Two-hand - safety operation. • Adjustment of the saw blade feed. • Self-braking engine kW 3.0 / 4.0 HP • HM saw blade Ø mm 350. / 380 rpm • Upper safety pressure device. • Fixed vertical guard. • Suction nozzle 2 x 100mm • Working pressure: 6/8 bar • CE version incl. roller table with manual stop flaps 500cm and 300cm Cutting dimensions with circular saw blade 350mm: 45 x 250mm 60 x 210mm 90 x 180mm 100 x 125mm Dimensions: L x W x H = 75cm x 90cm x 120cm Weight: 200 Kg technical information subject to reservation

Alpha-Tools KS 205 Cross-cut saw Motor: 230V 50Hz 800W Cutting height 90° 75mm Saw blade diameter: 205 x 18 x 2.5mm G&-2692-M371E

Bosch GCM 10 S Cross-cut and pull saw Product name: Cross-cut and pull saw Type: GCM 10 S Manufacturer: Bosch Condition: used Technical details / engine data - Swivel range 2x 57° - Inclination on one side up to 47° - Weight: 21 kg cutting depth at 90°: 87 mm x 305 mm cutting depth at 45 °: 53 mm x 216 mm - Overall dimensions: 780 x 680 x 540 mm - Diameter saw blade: 254 mm - Speed: 4,700 rpm Universal work table Bosch GTA 2600 - Dimensions folded: 1,300mm x 355 x 265mm - Weight: 15 kg - Load capacity: 160 kg Price: 490,00 € (FP) plus VAT from location Grunow (Brandenburg) Shipping is of course possible. Shipping is subject to freight and packaging costs, depending on size and weight. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again t ...

Code: 0029 Brand: BOTTENE Model: PUSH 180 - RX 4000 - CE Standard Automatic optimizing crosscut saw with loader for packaging, boards individually or in pack, window frames, profiles, furniture and various - CE Standard Technical data: Blade diameter mm 450/550 - F 30 Blade speed rpm 2800 Cutting capacity with blade mm 450 : mm 100 x 300 Cutting capacity with blade mm 550 : mm 150 x 350 Blade motor Kw 5,5 Positioning speed mt/min 180 Minimum cutting time sec. 0,2 Feeding by loading chains Push feed system employing a carriage running on stainless steel linear guides and precision rack. This system allows you to work with precision,at very high speeds (up to 180 m/1’) with any type of board without requiring any adjustments. The length of the board and any chalk-marked defects are detected during carriage reverse so as to permit total optimization with the minimum wa ...

Semi-automatic cross-cut saw Saw blade diameter 400mm Motor 3kW Sawing capacity 50 x 300mm, 100 x 190mm

Description: Two limiters with mechanical operation and angle adjustment, Protective cover, Adjustable knife feed speed, Feeding table with a length of 7600 mm, Unloading table with a length of 4000 mm, Emergency stop button, Lower exhaust hood with a diameter of 120 mm. Manual canvas operation Maximum canvas diameter 310 mm Shaft diameter 30 mm Motor power 3 kW Circular blade speed 2000 rpm Table dimensions 540 x 700 mm Fume hood diameter 100 mm Dimensions 540 x 700 x 1200 mm Weight 250 kgdimensions (l x w x h) approx.: 540 x 700 x 1,200 mm, weight approx.: 250 kg

programowanie wymiarów cięcia pneumatyczny docisk

Description: Motor 1600 Wdimensions (l x w x h) approx.: 600 x 600 x 600 mm, weight approx.: 25 kg

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !

Manufacturer: Dimter Type: S50 OptiCut Motor: 5.5 KW Saw blade:: ø500 mm Saw cut: 90 250mm or 120 200mm Function: 1. fault caps (chalk screed marking) and; 2. Optimize: automatic cutting according to cutting list or item Zenter line 200mm Printer: saw hood and Feed table: 5,400 mm (net) tilted backwards by 10° Output table: 2,400 mm tilted backwards by 10° Length stop: Fixed length stop - Product feed system (machine integrated) Feed: 60 m/min. Length stop belt drive Repeatability: +/- 0.5 mm Workpiece weight: max. 60 KG Suction: ø120 mm Powers: 380V, 3 Ph, 35A + 220 V, 16A Condition: Fully functional

Cross-cut saw for strong wood, glue binder, cantilevered wood... Work path approx. 3m , Cutting height approx. 45 cm Circular saw blade 900x50 good condition little worked!

Technical data: Saw blade diameter 1200 mm Max round wood diameter 450 mm Min round wood diameter 50 mm Saw motor power 20 kW / 975 RPM Hydraulic saw hub Dimensions L 3500 mm x W 2000 mm x H 3500 mm Weight 3600 kg + Conveyor 10 m with 7 hydraulic length stop systems

Description: Roller track approx 11500 mm including length measurement Saw blade diameter approx. ,400 mmdimensions (l x w x h) approx.: 12,000 x 1,000 x 1,700 mm, weight approx.: 1,000 kg

Elektra Beckum KGS 300 Kapp & Train Saw G&-4109-o0624

Description: motor 1000 W, saw blade diameter approx. 250 mm, saw table tiltabledimensions (l x w x h) approx.: 700 x 600 x 700 mm, weight approx.: 32 kg

Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested

Description: maximum machining length 3000 mm , double blade group for profile end milling at 90-45 degrees simultaneous and multiple drilling at 22 and 32 mm center to center distancedimensions (l x w x h) approx.: 6,300 x 1,900 x 1,600 mm, weight approx.: 1,700 kg

TECHNICAL DATA: Max working length mm: 3100 Min workable length mm: 500 Tilting blade: 0-45 ° Blade diameter max mm: 300 02 Saw aggregates Ø 300 + 02 Scoring aggregates - Ø 120 Central Saw Aggregate Automatic destacking 4-axis numerical control Total electric power KW: 10 Weight Kg: 2200

cutting depth: 700 mm, inclination: 0-90°, dimensions (l x w x h) approx.: 2,600 x 1,700 x 1,500 mm, weight approx.: 400 kg

Description: Table size 600 x 440 mm , Saw blade diameter 300 mm Pull length 500 mm Roller infeed length 2200 mm, outfeed with stop length 3000 mm Roll length 300 mm dimensions (l x w x h) approx.: 3,000 x 800 x 1,100 mm, weight approx.: 280 kg

Graule Train saw Cutting width 200mm Cutting height 80mm Engine 230V G&-4063-o0624 Underframe optional

Graule Pull saw with roller conveyor left and right 2.2kW 400V 50Hz swivel G&2937-M356V

Power supply 230V 1, 5kW Power consumption in the 5,5A Cutting height approx. 80 mm Length 150 mm WxHxD: 500 x 570 x 750 mm Weight approx. 50 kg Wheel height adjustment Swivel left/45° tilt 45°

Description: serial number 2011/42/5, saw blade diam. max. 350 mm, table surface approx. 800 x 580 mm, swivelling 45°, motor power 3 kW, roller conveyor right L approx. 1,000 mm, W approx. 300 mm, roller conveyor left L approx. 3,000 mm, W approx. 300 mmdimensions (l x w x h) approx.: 3,000 x 2,400 x 1,400 mm, weight approx.: 350 kg

Description: Saw blade diameter 400 mm , Rollerway length access 2050 mm, exit 3000 mm With fence , Adjustment range up to 2900 mm dimensions (l x w x h) approx.: 3,000 x 1,000 x 1,500 mm, weight approx.: 150 kg

saw-blade dia.: 210 mmCutting height: 70 x 305 mmCutting height at 45°: 35 x 305 mmsaw blade turning speeds: 4500 U/minMotor output: 1,5 kWmachine weight ab.: 9 kgDimensions (L/W/H): 340 x 500 x 740 mmCross-cut sawThe machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut.A line laser indicates where the cut should be made.The protective cover folds away automatically.Delivery including:saw blade (installed)6mm allen keyanthers2x side supportsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw-blade dia.: 305 mmCutting height: 105 x 340 mmCutting height at 45°: 60 x 340 mmsaw blade turning speeds: 5000 U/minMotor output: 2,0 kWmachine weight ab.: 25 kgDimensions (L/W/H): 700 x 570 x 980 mmCross-cut sawThe machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut.A line laser indicates where the cut should be made.The protective cover folds away automatically.Delivery including:saw blade (installed)6mm allen keyanthers2x side supportsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 new Holtec PICCOLO the Piccolo is handy, precise and flexible. mobile parcel crosscut saw in light design, e.g. for cutting and finishing on sawn timber packages Chain set with STIHL chain Type Rapid Super 0.404" for extremely fine surfaces and two-sided adjustable guide rails (can be used four times) Electric motor 7.5 kW great cutting performance for packages up to 1.15 m x 1.15 m and roundwood diameter up to 1.30 m Sword Length: 1.60 m

Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Description: with fencedimensions (l x w x h) approx.: 1,200 x 700 x 600 mm, weight approx.: 32 kg

JMS-8 – M Cross-Cut Saw • 220V 1200 Watt P1 • Saw blade speed of 4500 rpm. • Saw blade diameter 210/16mm • Swivel range of 46°/46° • Index options every 5° and 22.5° • Saw blade swivel 0-45° • Cutting depth 90°/45° 60/25mm • Cutting length 90°/45° 120/80mm • Weight of 9.5 kg G&JET-10000818M

Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...

CATALOG NUMBER KA001 TECHNICAL DATA - 700mm saw blade diameter - max cutting height 55mm - max. length of input material 4000mm - finished product length 190-320mm - efficiency of 8m3 solid material - main engine 7,5kW - total power 9.5kW - feeding table 2500x500mm - 2500mm conveyor - suction nozzle Ø 10mm - dimensions length / width / height 5700/1500 / 1800mm - weight about 1000kg Advantages: - Speed - Security - Cutting length adjustment - Height adjustment of the dispensing conveyor - One-man service ADVANTAGES - new machine - Polish production - CE certificate Net price: PLN 62990,- Net price: 14998 EUR depending on the price 4.20 euros (With higher fluctuations the price may change)

Saw unit with Spahn housing for 400 mm blade 2 KW 2700 RPM 105 mm stroke Pneumatic stroke

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.

Part Number 6481 TECHNICAL DATA - max disc diameter 350mm - disc bore diameter 30mm - shield cover - max cutting height 100mm - max cutting width 800mm - possibility of cutting at an angle in a vertical plane of +90°/-90° (arm travel or disc travel) - the ability to rotate the arm right / left - arm adjustment up/down - diameter of the extraction connection 60mm - 3kW motor - table top size 1100x1040mm - dimensions length / width / height 1550x1100x1600mm - weight 191kg ADVANTAGES – very good condition – used saw Net price: 7 900 PLN Net price: 1 816 EUR depending on the price 4,35 EUR (Prices may fluctuate with higher fluctuations)

ORDER NO. 6555 TECHNICAL DATA - max disc diameter 350mm - disc bore diameter 30mm - shield cover - max cutting height 110mm - max cutting width 1050mm - possibility of cutting at an angle in a vertical plane of +90°/-90° (arm travel or disc travel) - the ability to rotate the arm right / left - arm adjustment up/down - diameter of the extraction connection 60mm, 150mm - 3kW motor - brake - table top size 1000x1200mm - dimensions length / width / height 1750x1200x1500mm - weight 278kg Net price: 8900 PLN Net price: 1978 EUR depending on the price 4,50 EUR (Prices are subject to change with higher fluctuations)

Description: max. cutting width 90°/45°: 320 / 223 mm max. cutting depth 90°/45°: 120 / 76 mm cutting capacity 90°/90°: 320 x 120 mm cutting capacity 45°/45°: 223 x 76 mm saw blade: 315 x 30 mm speed at nominal load: 4100 rpm cutting speed: 51 - 68 m/sdimensions (l x w x h) approx.: 4,900 x 1,900 x 1,600 mm, weight approx.: 250 kg

Description: including spare bladedimensions (l x w x h) approx.: 800 x 700 x 1,200 mm, weight approx.: 70 kg

AUTOMATIC CROSSCUT SAW machine type OMEC TA 185 second hand machine volt. 380/50

Optimization crosscut saw Cutting width mm: 850 Cutting length mm: 400/1500 Cutting height max mm: 140 Saw blade diameter mm: 600 Total connection kW: 30

Description: tilting cut -45 +45° blade diameter 300 mm , shaft diameter 30 mm ,dimensions (l x w x h) approx.: 1,400 x 750 x 1,600 mm, weight approx.: 70 kg

Table size 520 x 355 mm Weight approx. 25 kg Saw blade diameter. 250 mm Hole 30 mm Speed 3000 rpm. Engine power 1.6 HP (1.1 kW) height-adjustable stand Left and right adjustable at 45 ° Dust nozzle diameter. 80 mm incl. 1 saw blade

Semi-automatic undercounter cross-cut saw OMGA, model T421ST Saw blade diameter 400mm Cutting capacity: 20x270mm, 50x250mm, 100x190mm, 115x152,5mm Stroke saw blade pneumatic Support table inlet and outlet side Adjustable speed Two-hand operation (CE) 10 degree inclination, workpiece lies at the machine stop Motor 2,7kW

Manufacturer: OMGA Type T55 300 Saw heigth: 75mm saw length 135mm Saw: ø300mm Saw spindle: ø30mm Motor: 1.2 kW Toerental 3000 tpm Dust extraction: 80mm incl. fan Condition: Full Functional

Description: maximum cutting length 3500 mm , blade diameter 350 mm , shaft diameter 30 mm , swiveling heads - 45 +45 degreesdimensions (l x w x h) approx.: 4,300 x 1,500 x 1,600 mm, weight approx.: 700 kg

maximum element length 150cm total power 9 kW start star triangle conveyor length 300cm power supply 380v

Description: Miter saw Rapid SGS 1017 No. 1082dimensions (l x w x h) approx.: 1,200 x 800 x 1,600 mm, weight approx.: 300 kg

Complete Log Cut-off Saw Manufactured by Raute