testere ahşap çalışma kullanılmış satılık (1,060)

Testere bıçağı Çapı 350 mm Projeksiyon 77 mm Projeksiyon 45° 54 mm Kelepçe açıklığı 84 mm Kesme boyutu 4210x5140 mm

Bu TIGER UKA 600 çapraz kesim montajı 2015 yılında üretilmiştir. 600 mm testere bıçağa, 90 derece açıda 165 x 240 mm kesme kapasitesine ve 5,5 Kw motor gücüne sahiptir. Makine, TigerStop 7.5 Otomatik Stop ve itici ile hassasiyet ve verimliliği artırıyor. Yarı otomatik veya tam otomatik işlemler için ideal olan bu cihaz, maksimum besleme hızı 40 m/dakika olarak desteklenir. Bu makine hakkında daha fazla bilgi için bizimle iletişime geçin.

SHODA-CNC Router (6) ana kafalar-(6) piggy arka kafalar- model NC 516-1326, (2) 51x102 vakum tablaları - 15M FANUC Kontrol Cihazı, ikiz 7 1/2 hp. vakum pompaları, 1995 çok düşük saatler, ... Fiyat-$15,000

Auction-ID: A1-45188-188

Auction-ID: A1-45188-120

Equipped with a pre-built motor Auction-ID: A1-45188-200

Cross-cut pull saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover is folded away automatically. Saw blade diameter 210 mm Cutting height 70 x 305 mm Cutting height at 45° 35 x 305 mm Saw blade speeds 4500 rpm Motor power 1.5 kW Machine weight approx. 9 kg Dimensions (length/width/height) 340 x 500 x 740 mm Delivery Included: Saw blade (mounted) 6 mm Allen key Dust bag 2x side supports Condition: never used / new (5) Auction-ID: A1-45681-718

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Auction-ID: A1-45681-829

Engine 58 cc Saw blade length 500 mm Speed max. 11500 rpm Motor power 2.4 kW Fuel Type 40:1 Oil Blend Weight 7.1 kg Dimensions L x W x H 0.55 x 0.3 x 0.26 m Condition: never used / new (5) Auction-ID: A1-45681-777

Auction-ID: A1-45239-2079

Main motor 5.5kw 3 RPMs Maximum saw blade -350mm Scoring 0.75KW -120mm Parallel guide on the right side - manual Adjustable up to 1230mm Tiltable 0-45 degrees Height adjustment (up/down) Dust extraction included - connected to the same 380 circuit Saw blade for solid and sheet material Cavity knife available Auction-ID: A3-43511-19131

Auction-ID: A1-45188-191

Cross-cut pull saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover is folded away automatically. Delivery Included: Saw blade (mounted) 6 mm Allen key Dust bag 2x side supports Saw blade diameter 305 mm Cutting height 105 x 340 mm Cutting height at 45° 60 x 340 mm Saw blade speeds 5000 rpm Motor power 2.0 kW Machine weight approx. 25 kg Dimensions (length/width/height) 700 x 570 x 980 mm Condition: never used / new (5) Auction-ID: A1-45681-751

Table size 2000x1380mm, width between bridge uprights approximately 3650mm. Auction-ID: A1-45188-243

Auction-ID: A1-45188-154

Cutting depth:70 mmengine output:12.4 A, 220/380 V , 2 x 6 kWworking length:2500 mmdimensions of the machine ca.:3900 x 1100 x 1000 mmweight:1500 kg

- 2.20 KW motor. - Disc diameter 350 mm. - Table dimensions 605 x 190 mm. - Adjustable from -45° to +45°. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-43

- Maximum cutting width 900 mm. - Maximum cutting height 120 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-57

Serial number 4784, Wheels diameter 900 mm, Tilting table with dimensions 1250 x 1310 mm, Working height from the floor 950 mm, Maximum cutting width approx. 870 mm, Maximum cutting height approx. 500 mm, Tilting guide with dimensions 400 x 150 mm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-347

- Total installed power 9 KW. - Cutting length approx. 2500 mm. - Maximum cutting width approx. 2200 mm. - Maximum cutting depth 50 mm. - Maximum postforming cutting depth 42 mm. - Main disc unit: 300 mm disc diameter, 5.50 KW-04900 rpm motor. - Scoring disc unit: disc diameter 125 mm, motor 0.55 KW-05600 rpm. - Postforming disc unit: 300 mm disc diameter, 1.10 KW-04800 rpm motor. - Saw carriage: feed speed 12 m/min. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-70

- Total installed power 4.55 KW. - Main disc: 4 KW motor, speed 4000 rpm, maximum disc diameter 300 mm, inner diameter 30 mm, tiltable 0°- 45°. - Scoring disc: 0.55 KW motor, speed 9200 rpm, diameter 120 mm, inner diameter 20 mm. - Carriage length 3000 mm. - Maximum cutting width against the parallel guide approx. 1270 mm. - Maximum cutting height at 0°: approx. 100 mm, maximum cutting height at 45°: approx. 72 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-62

- Disc diameter 380 mm. - Table dimensions 1650 x 1030 mm. - Maximum cutting height approx. 120 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-45

• Notching saw, double mitre saw • 2 x motor 1,10 KW-2860 rpm each • Saw blades diameter 300 mm • Table size 890 x 260 mm • Actuating by foot switch • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 1000 x 2050 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-121

\"The MABA 90 Degree Radial Saw is an industrial piece of equipment designed to make accurate 90 degree cuts, ideal for cutting operations in various materials. Manufactured by the MABA brand, this machine stands out for its robustness and reliability, meeting the requirements of production and maintenance workshops. Offered as is, it is an interesting solution for professionals wishing to invest in functional equipment to be optimized or put back into service. With dimensions of 110 cm in length, 106 cm in width and 160 cm in height, this radial saw offers a stable structure and is suitable for cutting work requiring precision and safety. Its weight of 388 kg guarantees excellent rigidity, limiting vibrations during use and ensuring a consistent cut quality. This makes this machine a powerful tool for industrial right-angle sawing applications.\" Auction-ID: A1-44765-304

Auction-ID: A1-45422-33

\"The MABA 90 Degree Radial Saw is an industrial piece of equipment designed to make accurate 90 degree cuts, ideal for cutting operations in various materials. Manufactured by the MABA brand, this machine stands out for its robustness and reliability, meeting the requirements of production and maintenance workshops. Offered as is, it is an interesting solution for professionals wishing to invest in functional equipment to be optimized or put back into service. With dimensions of 110 cm in length, 106 cm in width and 160 cm in height, this radial saw offers a stable structure and is suitable for cutting work requiring precision and safety. Its weight of 388 kg guarantees excellent rigidity, limiting vibrations during use and ensuring a consistent cut quality. This makes this machine a powerful tool for industrial right-angle sawing applications.\" Auction-ID: A1-44765-305

LUREM ME 40Sliding table saw with aluminium carriage 2700 mm and parallel fence 1400 mm.Blade: max. Ø 400 mm Motor: approx. 4 kW – 380 VBlade: fixed, no tiltAdjustment: manual up/downCondition: FunctionalDimensions (mm): 2700 × 3000 × 1200Weight (kg): 500 Auction-ID: A1-45486-13

agrega sayısı: 6 Kesme genişliği: ~ 5.000 mm Kesme yüksekliği: ~ 100 mm Daveba uzun tahtalardan aynı anda birkaç kısa tahtaya (değişken uzunluklu) mekanizasyon olmadan kesilmesi için çoklu çapraz kesim testere. Sistem sökülüp yüklemeye hazırdır. Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Serial number: 225568451; PTO drive with PTO shaft; 3-point pick-up, hydraulic operation, adjustable cutting length 20/25/33/40/45/50/54 cm, attached discharge conveyor belt, approx. 4m, hydraulically foldable and driven Auction-ID: A7-45435-2

Machine: Sliding table saw Carriage: 3200 x 360 mm Main Blade: Ø250 / 300 / 350 / 400 mm Blade Shaft: Ø30 mm Cutting height: 125 mm (blade Ø400 mm) Blade inclination: 90° - 45.5° Blade Motor: 4 kW (5.5 hp) Auction-ID: A1-45443-19