saws wood used for sale (1,067)

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC CLASSIC 50 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -New machine from our demonstration room, Bj. 2022Pos. 1: Classic 50 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting sp ...

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm

cutting width: max. 330 mmCutting height: max. 150 mmSaw blade diameter: 550 mmMotor output: 7,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 550 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 220x150/330x50 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 7.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations and e ...

cutting width: max. 610 mmCutting height: max. 150 mmSaw blade diameter: 600 mmMotor output: 9,2 kWturning speeds: 2750 U/minRequired air-pressure: 7 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 770x1385x1370 mmSALVAMAC Legend 600 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 420x150/520x100/610x30 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 9.2 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibration ...

cutting width: max. 375 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 500fast semi-automatic chop saw-------------------------------------------------- -Maximum cutting areaOption A: 220x125/310x50mmOption B: 350x80/375x50mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 5.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations an ...

AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - sn 1656

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - 4.5 kw - blade diam. 330 mm - v. 380/50 - sn 99T318 - year 1999

SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - working length 3300 mm - tilting blades 45° - n. 2 motors 1.1 kw - blade diam. 330 mm - v. 380/50 - sn 96T233 - year 1996

SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)

SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002

SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998)

Technical details: - Min. blade length: 4,330 mm - Max. blade length: 4,430 mm - Possible saw blade widths: 6 - 25 mm - Max. blade thickness: 0.6 mm - Cutting speed: 1,168 m/min - Roll diameter: 600 mm - Cutting height: 360 mm - Cutting width: 570 mm - Table length: 580 mm - Table width: 580 mm - Diameter of suction nozzle: 100 mm - Mobile on wheels, 1 x wheel brake available - With motor brake, can be unlocked for changing the saw blade Engine data: - Power: 2.2 kW - Voltage: 380 V - Current: 5.5 A - Frequency: 50 Hz - Speed: 2,890 rpm Accessories: - incl. 1 x saw blade 9 x 4,430 mm - incl. 1 x saw blade 15 x 4,430 mm - incl. 1 x saw blade 25 x 4,430 mm (already mounted on machine!) - incl. 1 x saw blade 30 x 4,430 mm (Note: Use is not recommended by the manufacturer.) Dimensions (LxWxH): 1,118 x 750 x 2,113 mm Transport Dimensions = Machine Dimensions  ...

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

Table saw Scheppach 400 V 3.3 KW Blade diameter 600 mm Key Push poles Very little used.

OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw blade diameter 550mm Pneumatic material clamping Pneumatic saw passage Saw control with two buttons 7.5kw main motor 2x roller tables length 160cm each CE Certified White Paper

Saw blade Diameter 350 mm Projection 77 mm Projection 45° 54 mm Clamp opening 84 mm Cutting size 4210x5140 mm

I sell a double mitre saw without scoring with continuous COMEC TD2400 + CA. Working width 250 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85KW Magazine for elements. Ejection back to operator Condition as good as new. Fully operational and ready to go. Possible to check. Available soon. With CE and complete documentation.

cutting capacity - round: 300 mmdimensions of saw-band: 3320 x 27 x 0,9 mmcutting capacity - flat: 330 x 260 mmcutting capacity - square: 260 mmControl: evolution work height max.: 870 mm: 40 / 80 mt/minweight of the machine ca.: 1050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

FKS 315-1500E Sliding table saw Trimming length 1220mm Saw Blade Diameter 315mm Cutting height 100/75mm Cutting width with stop 940mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 2,4kW 400V Weight approx. 210kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900315

Key data: 45 °, 3800 mm

SPECIFICATIONS: Max. saw blade diameter mm: 400 Saw blade inclination: 0° - 45° Saw carriage length mm: 3800 Installed capacity: Hp 7.5 Scoring diameter mm: 120 2 angle stops

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

Weibert BS 400 Band saw Wooden Band Saw Roller Diameter 400mm Belt width 25 mm Cutting height 320 mm Swivel -15° +45° Motor power 2.2 KW Belt length 3300 to 3400mm Suction nozzle 2x 100mm WJ-X00100 Exhibition machine