saws wood used for sale (1,068)

Part Number 7407 SPECIFICATIONS - max cutting height 120mm - max element width 700mm - working width of the shaft with saws 620mm - max saw blade diameter 450mm - blade bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed From below: -Triggers - 2 pulling shafts, smooth - shaft with saws - Pulling shaft, smooth - 2 types of feed speeds - feed motor 4.4kW - 30kW motor - machine dimensions length/width/height 2370x1400x1800mm - weight about 3000kg – Polish production – used machine, very good condition Net price: 45 900 PLN Net price: 10 432 EUR depending on the price 4,40 EUR (Prices are subject to change with higher fluctuations)

Panel Saw Scheer Type: PA 7004 Year of Make: 1999 Cutting length 4200 mm with automatic lift table loading with cutting optimization software Full formats 2800 x 4200 mm and half formats 2800 x 2070 mm were processed

Table saw Altendorf TKR 45 (Ref. No. 183-2712) with spec. Stroke, digital display/operation max. saw blade diameter 450 mm Built in 1990 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Raimann ProfiRip KR610 M multirip Maximum cutting width 610mm Max cutting height 140mm Track width 630mm Maximum board width 960mm Maximum feed speed 48m/min Saw blade size min/max: 250-400mm 55kw main motor Pneumatic roller pressure The machine will be available soon

WEIBERT WJ-K315 Sliding table saw Motor power: 400V 3kW 100%, n=4000 min. Cutting height: 103mm Saw blade 250-315mm swivel 90°-45° With sliding table 2300mm Images with special equipment if necessary! Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Oberschutz cpl. Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Motor 4 KW (5.5 HP) S1 100%, WJ-800109 Scoring unit with motor WJ-800105

Key data: 5300 mm, 2200 mm

Wall model

Morsoe mitre punch, various, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Multi-blade circular saw Raimann, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Variklio galia 3.7 kW Ratų skersmuo 800 mm Maks. Ruošinio Aukštis 200 mm Pjuvenų nutraukimas Ø100 mm Stalo matmenys 750 x 630 mm Pagaminta Danijoje Transportavimo matmenys 2400x800x1700 mm Svoris 690 kg Kaina 1150 Eur + PVM

Vertical Trend and Slit Band Saw Fabr. Raimann Type B 11 Built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Engine 18.5 Kw Cutting width R/L of sheet-200 mm each Cutting height 200 mm Feed continuously variable 10-40 m/min 1.5 kw Band saw blade length 6300-6500 mm Electro-motor blade clamping Pneumatic roller slide adjustment

Key data: 300 mm

SPECIFICATIONS: Saw blade diameter mm: 300 Bore mm: 30 Max. material thickness at 45?: 60 mm Installed power: 3.0 KW Revolutions: 3000 rpm Max. cutting width mm: 600 Complete with 2 roller tables of 3500 mm and 1500 mm with electronic positioning stop 2 Pneumatic stops

Gang Saw / Full Frame / Saw Frame ESTERER EWD HDS 600 (HDS/N HDSN) Built in 1973 600 stroke max. passage 71 cm with splitting wedge Esterer Aver with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up with spare parts, if available good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Resawing saw ESTERER EWD Type: BNK 160 Built in 1986 3-style variable Harmonic machine Cutting height maximum: 165mm Passage width max: 800mm Drive power 2x 75 kW with S-conveyor with Modlwender with chain retraction with centering device at the front with 2-lamella splinter separator with external task (tilt destacking, cross conveyor) good condition - fully functional Can still be viewed during operation. Has been continuously maintained and overhauled. Location: Austria, near Graz

Key data: 46 °, 3200 mm, 1250 mm

I'm selling a sliding table saw with a scoring machine Manufacturer: OTTO MARTIN Model: T60 Classic Year of construction 2007 Cutting length 3200mm. Cutting width 1250mm (opzion) Cutting height max. 130mm (saw blade diameter 400mm) Saw blade and scoring swivel 0-46° digital Digital saw blade and scoring height adjustment Digital display of rip fence and working heights Activation of the main saw blade and scoring machine from the control panel. Main motor sliding table saw 5.5KW (7.5 HP) (4000/4800/6000 rpm adjustable) Scoring motor sliding table saw Tools, options, and accessories on the pictures included in the price. Very good condition. Available soon. Incl. full documentation and CE certificate.

cutting width: max. 250 mmCutting height: max. 80 mmSaw blade diameter: 400 mmMotor output: 3,0 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +-20 mm mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 400 – The semi-automatic chop saw-------------------------------------------------- -Maximum cutting area: 220x80/ 250x50 mm.(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Motor power of the saw motor 3.0 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations ...

Sawblade tiltable: 0-45 °Length of the rolling table: 3.200, 3.800 mmcutting width: 1.300, 1,500 mmMotor output: 7,5 kWCutting height: 177 mmCutting height at 45°: 133 mmSaw blade diameter: 500 mmSpeed: 3000/3600/4200 U/min.work height max.: 870 mmDust suction hood: 1x120, 1x100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Primutini Cut-Off Tape Saw Roll diameter 1300mm Roll width 140 mm Cutting width to the right and left of the Saw blade 150mm Cutting height max. 650mm Drive 30 kW

Wheel diameter: 900 mmCutting height: 300 mmcutting width: 880 mmMotor output: 4,5 kWTable dimensions: 840 x 900 mmTable tiltable: -15° bis +45° GradDimensions (L/W/H): 1.800 x 1.000 x 2.800 mmmachine weight ab.: ca. 1.000 kgsaw band length: 6.100 6.200 mm: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC CLASSIC 50 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -New machine from our demonstration room, Bj. 2022Pos. 1: Classic 50 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting sp ...

Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317

From insolvency: Avola ZB 400-5 Year of construction 1996 No.51809 380 volts 130mm cutting height Saw blade 400mm Table size approx. 1030x740mm

cutting width: max. 330 mmCutting height: max. 150 mmSaw blade diameter: 550 mmMotor output: 7,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 550 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 220x150/330x50 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 7.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations and e ...

cutting width: max. 610 mmCutting height: max. 150 mmSaw blade diameter: 600 mmMotor output: 9,2 kWturning speeds: 2750 U/minRequired air-pressure: 7 barwork height max.: 900 +- 20 mmDimensions (L/W/H): 770x1385x1370 mmSALVAMAC Legend 600 the semi-automatic chop saw-------------------------------------------------- -Maximum cutting area 420x150/520x100/610x30 mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 9.2 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibration ...

cutting width: max. 375 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWturning speeds: 2800 U/minRequired air-pressure: 6-8 barDimensions (L/W/H): 530x869x1217 mmSALVAMAC Legend 500fast semi-automatic chop saw-------------------------------------------------- -Maximum cutting areaOption A: 220x125/310x50mmOption B: 350x80/375x50mm(When sawing stacked boards, note: rear stop height 100 mm)The structure is made entirely of sturdy, thick-walled steel,which is painted throughout and reinforced. A solid oneFloor mounting system is equipped with flanged steel feet,to ensure secure attachment.The two-hand control is ergonomically positioned for comfortand efficient operation.Engine power of the saw motor 5.5 kW.The cutting speed is adjustable via a pneumatic controller,to enable precise adjustment. The system also has aShock-absorbing system to minimize vibrations an ...

I sell a vertical band saw fields hammer N4400. Motor power 3.0KW Suitable for saw blades up to 35mm Swivel table. Year of construction 2009 Condition as good as new. Available soon.

Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single str ...

AUTOMATIC CUTTING SAW machine model STROMAB PS 45 for solid wood, wooden packaging, furniture and others second hand machine with automatic movement of unit volt. 380/50 roller conveyor of mt. 2 to the right of the blade roller conveyor of mt. 2 to the left of the blade technical details : motor power Hp 5,5 blade diameter mm.450 blade hole diameter mm.30 Blade Speed RPM 2800 cut-off capacity mm 510 x 130 (H) net weight Kg.600

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

SECOND-HAND THROUGHFEED LOADER FRIULMAC MOD. FN3 - CE RULES - 3 rollers - min/max working length 250/1300 mm - max working width 160 mm - min/max working thickness 10/80 mm - production capacity : 0-50 psc / min - diam. Blades 400 mm - year 1996