Manufacturer:
(Category: 102)
Manufacturer: GILDEMEISTERYear: 1996Type: CNC latheNumerical control: Heidenhain ELECTRO PILOT turn plusAxes: 2 axes (X, Z)Turning diameter above the bench: Ø 500 mmTurning diameter above the carriage: Ø 290 mmMax. turning length: 640 mmSpindle: 20–5,000 rpm – 22 kW – max. torque 150 Nm – bore 72 mm – passage 65 mmStrokes: Z 650 mm / X 212 mmFast feeds X/Z: 10 m/minTailstock: sleeve Ø 80 mm – CM4 – stroke 100 mmEquipment: 3-jaw chuck Ø 250 mm, SAUTER turret 12 positions VDI 30, tailstock, full documentationDimensions: approx. 3300 × 1800 × 1900 mmWeight: approx. 5000 kgRemarks: Robust German-made CNC lathe. Auction-ID: A1-46647-225
Machine number: 5012221Center width: 760 mmTurning diameter over bed: 430 mmTurning diameter over face cuts: 240 mmTurning diameter over offset: 690 mmBed width: 300 mmSpindle bore: 58 mmSpindle speed: 20 - 2000 rpmLongitudinal feeds: 0.05 - 0.82 mm/UFace feeds: 0.02 - 0.4 mm/UThread (metric): 0.5 - 7 mmDiameter of lead screw: 35 mmPitch of lead screw: 6 mmDiameter of tailstock quill: 58 mmTailstock Quill Travel Adjustment: 150 mmQuill Mount: MK4Reference: Limani/Maric Auction-ID: A7-46763-342
AC power supply 220 V, 3PH, 50/60 Hz; control voltage AC 110 V / DC 24 V; rated current 75 A; installed power 35 kVA; spindle speed up to 6000 rpm; ASA A2#5 spindle nose; 53 mm spindle passage; 12-tool VDI turret; Tool dimensions 25 x 25 mm; boring bar Ø 40 mm; strokes X 242 mm / Z 440 mm; fast feeds X 20 m/min, Z 25 m/min; 11 kW spindle motor; X-axis motors 1.4 kW / Z axis 2.8 kW; lubricating tank capacity 100 L; Max turning Ø 350 mm; Max turning length 425 mm Auction-ID: A1-46647-12
CNC lathe for metal part turning operations. CNC Control: Heidenhain Turn PlusAxes: 2 Axes Auction-ID: A1-46647-246
Manufacturer: YAMAZAKI MAZAKYear: 1994Type: CNC latheNumerical control: Mazatrol T32-2Axes: 2 axes (X, Z)Max. diameter above the bed: Ø 560 mmMax. turning diameter: Ø 410 mmMax. turning length: 1500 mmSpindle: 35–3500 rpm – main motor 22 kW – spindle nose A2-8 – bore 76 mmTurret: 12 positionsEquipment: Programmable tailstock, complete enclosureWeight: approx. 6900 kgOrigin: JapanCondition: used Auction-ID: A1-46647-230
Power consumption 18 kVA, current consumption 21 A Auction-ID: A1-46781-17
Power consumption 41.2 kVA, current consumption 62 A, rapid traverse X-axis 5 m/min, rapid traverse Z-axis 10 m/min, feed X-axis 3.5-6 m/min, feed Z-axis 10 m/min, tool changer A with 12 stations, tool change B with 8 stations, incl. accessories Auction-ID: A1-46781-1
Machine number: 219278Operating voltage: 380 VSpindle passage: approx. 22 mmSpindle speed: 270-3000 rpmCentre length: approx. 350 mmCentre height above bed: 110 mmTurning diameter over bed: 220 mmCentre height over support: 70 mmTurning diameter over support: approx. 140 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a quick-release chuckincluding post collets and other suitable accessoriesReference: Ulmer - Lot 16 Auction-ID: A7-46763-354
2-axis CNC lathe with HAAS CNC Manufacturer: HAAS Model: HL-2 Year: 1997 Serial Number: 61212 Max turning diameter: 508 mm Max turning length: 610 mm Spindle Bore: 76.2 mm Max spindle speed: 3750 rpm Turret: 10 positions CNC Control: HAAS CNC Power supply: 360 / 480 V – 3 phases – 50/60 Hz Dimensions approx. (L x W x H): 3200 x 1778 x 1778 mm Weight approx.: 4082 kg Auction-ID: A1-46647-263
Operating voltage: 380 VFrequency: 50 HzRated current: 11 ASpindle speed: 70 - 3500 rpmCenter height: 145 mmCenter width: 750 mmTurning diameter over bed: 280 mmTurning diameter over face cuts: 178 mmSpindle bore: 35 mmSpindle nose: D 1-3Morse taper in head sleeve: 3Lead screw diameter: 25 mmThread: 6 mmPitch Reference: Showroom Neuburger Auction-ID: A7-46763-351
Center width: 750 mmTurning diameter over bed: approx. 300 mmTurning diameter over support: approx. 190 mmBar passage: approx. 40 mmincl. three-jaw chuck, diameter: approx. 155 mm Auction-ID: A7-46287-25
Manufacturer: YAMAZAKI MAZAKModel: Quick Turn 20Year: 1997CNC Machine: Mazatrol T PlusAxes: 2 Axes (X, Z)Capacities:Max. diameter above bed: Ø 300 mmDistance between points: 446 mmX-axis stroke: 180 mmSpindle:Bore: 61 mmMax. speed: 4500 rpmMotor power: 15 kWTurret: 8 positionsDimensions per machine: 2660 x 1520 x 1879 mmUnit weight: approx. 4170 kg (total batch weight approx. 8340 kg)Condition: used Auction-ID: A1-46647-261
Power consumption 34 kVA, current consumption 63 A, rapid traverse X-axis 5 m/min, rapid traverse Z-axis 10 m/min, tool changer A with 8 stations, tool change B with 8 stations, incl. accessories Auction-ID: A1-46781-2
Machine number: 291218Center width: 760 mmCenter height: 205 mmSpindle bore: 58 mmMain spindle Speeds 12: from 20 to 2000 rpmSpindle head mount: CAMLOCK 6incl. two-axis digital display from the manufacturer FAGORThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck from the manufacturer SMW AUTOBLOK, diameter: 200 mm and a steady restReference: Hercegfi - Lot 48 Auction-ID: A7-46763-220
Operating voltage: 380 VControl voltage: 220 VConnection: 3 kWRated current: 6.25 AFrequency: 50 HzSpindle speed: 12 – 2800 rpmCentre length: 750 mmCentre height above bed: 170 mmTurning diameter over bed: 340 mmCentre height over support: 100 mmTurning diameter over support: approx. 200 mmSpindle passage: approx. 38 mmEquipped with: – Tailstock – Multifix turning steel holder – Three-jaw chuck RÖHM (Ø 160 mm)Reference: Mahle Auction-ID: A7-46763-348
OKUMA CNC Lathe Serial Number: 131693 Power: 45 kW Control: OKUMA OSP-P200L 2 axes + C Diameter on bed: 620 mm Diameter on trolley: 420 mm Distance between points: 1270 mm Chainring: 400 mm Bar capacity: 80 mm Spindle speed: 35–3500 rpm 12-position motorized turret type VDI Fast feeds: X 20 m/min, Z 25 m/min MT5 tailstock Includes chip extractor and presetting Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-46053-11
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmSub-spindle power: 3.7 / 5.5 kWSub-spindle bar passage: 42 mmC-axis: 0.001° Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500 Auction-ID: A1-46647-237
Serial Number: 324Operating Voltage: 380 VFrequency: 50 HzConnection: 20 kVAControl: MORIC-T5FCircumference Diameter over Bed: 450 mmCircumnavigation Diameter over Turret: 300 mmCenter Width: 595 mmStandard Diameter: 160 mmMax. Turning Length: 525 mmTravel X-Axis: 222 mmTravel Z-Axis: 560 mmSpindle Speed: from 50 to 5000 rpmSpindle Bore: 52 mmFront Bearing Inner Diameter: 90 mmNumber of Tools: 12max. 6 stations for driven toolsShaft cross-section of the lathe bits: 20 mmShaft diameter for boring rods: max. 32 mmSpindle speed of the driven tools: 100 - 2000 rpmRapid traverse X-axis: 12,000 mm/minRapid traverse Z-axis: 15,000 mm/minFeed speed in X-axis: 0.00001 to 250 mm/minZ-axis: 0.00001 to 350 mm/minTipping feed speed X- and Z-axis: 1260 mmTailstock Travel: 450 mmquill diameter: 75 mmquill travel: 80 mmthe machine is equipped with a tailstock, as well as a 12-cavity tool turretincludi ...
Manufacturer: YAMAZAKI MAZAKModel: Quick Turn 20Year: 1998Numerical Control: Mazatrol T PlusAxes: 2 Axes (X, Z)Capacities:Max. diameter above bed: Ø 300 mmDistance between points: 446 mmX-axis stroke: 180 mmSpindle:Bore: 61 mmMax. speed: 4500 rpmEngine power: 15 kWTurret: 8 positionsDimensions per machine: 2660 x 1520 x 1879 mmUnit weight: approx. 4170 kg (total batch weight approx. 8340 kg)Condition:used Lot sold as a single set (2 machines) Auction-ID: A1-46647-231
Machine number: 10279Operating voltage: 380 VConnected load: 3 kWRated current: 25 AFrequency: 50 HzSpindle speed: 40 - 2800 rpmCentre length: 750 mmCentre height above bed: 150 mmTurning diameter over bed: approx. 300 mmCentre height over support: 100 mmTurning diameter over support: 200 mmSpindle passage: approx. 35 mmEquipment: Tailstock Multifix Type B steel holder, three-jaw chuck (diameter: 160 mm), 2-axis digital display from the manufacturer RSFReference: Mahle Auction-ID: A7-46763-349
Manufacturer: INDEXYear: 2005Type: Moving spindle CNC lathe with motorized tools and C-axisNumerical control: Siemens Sinumerik 840D PowerlineChuck: Ø 160 mmMax. rotation diameter: Ø 180 mmStrokes: X-axis 520 mm / Z-axis 200 mmFast feeds: X/Z 40 / 30 m/minMoving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 NmC-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30Motorized tools: up to 6,000 rpm – 8.5 kWPower supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kWWeight (kg): approx. 4500 Auction-ID: A1-46647-273
Operating voltage: 230 VFrequency: 50-60 HzRated current: 11 AControl: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)Turning length: approx. 300 mmCenter height above bed: approx. 100 mmTravel X: approx. 100 mm, Z: approx. 200 mmThe machine is equipped with a tailstock, a three-jaw chuck and a special tool turretincluding a mobile workbench and matching accessoriesNote: An identical and completely identical machine will be delivered and not exactly the one that can be seen in the photos. Auction-ID: A7-46763-338
Manufacturer: HYUNDAIYear: 1999Type: CNC latheCNC numerically controlled: Siemens Sinumerik 840CMax. turning circle: Ø 254 mmDiameter above bed: Ø 440 mmMax. turning length: 500 mmBar capacity: Ø 51 mmSpindle: 36–4,000 rpm – nose A2-6 – 11 kW (continuous) / 15 kW (30 min)Chuck: Ø 210 mm, Hydraulic clampingTurret: 8 stations – 25 × 25 mm tools / Ø 40 mm barsTailstock: programmable hydraulic – CM4 taperChip conveyor: hinged, side outletDimensions (mm): 2600 × 1700 × 1750Weight (kg): approx. 4200Remarks: Machine used, sold with tailstock and conveyor. Auction-ID: A1-46647-214
FANUC CNC Lathe Serial Number: S2-1342 Power: 13 kW CNC Control: FANUC 0i-TA Spindle speed: up to 4500 rpm (max. 6000 rpm) 12-position turret Turning diameter: 180 mm Z-axis travel: 300 mm 160 mm hydraulic plate Bar pitch: 52 mm Coolant capacity: 40 L Suitable for the production of small and medium-sized parts Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-46053-12
Manufacturer: SOTOS VOJUS (VOJUS a.s.)Year: 2001Type: CNC lathe with automatic cycleNumerical control: Siemens Sinumerik 840D ShopTurnMax. turning diameter: Ø 630 mmDiameter above dragger: Ø 420 mmMax. turning length: 3,000 mmSpindle: up to 2,500 rpm – passage Ø 110 mmFast feeds: longitudinal 10 m/min – transverse 5 m/minInstalled power: approx. 26 kWEquipment: Multifix tool holder, 1 bezel, coolantDimensions (mm): 3000 × 1800 × 1790Weight (kg): approx. 4500Remarks: High-capacity CNC lathe for long workpieces. Serial number included in the description. Auction-ID: A1-46647-220
Manufacturer: GILDEMEISTERModel: CTX 400 Series 2Year: 1998German-made 2-axis CNC lathe, robust and precise, suitable for turning single parts and small to medium series.CNC : HEIDENHAIN TURN PLUSAxes: 2 axes (X, Z)Turning capacities:Diameter above bed: Ø 570 mmDiameter above carriage: Ø 420 mmX-axis stroke: 220 mmZ-axis stroke: 635 mmSpindle:Bore: 79 mmChuck diameter: Ø 250 mmSpindle speed: 25 – 5000 rpmMotor power: 21 kWFast feeds:X-axis: 20 m/minZ-axis: 24 m/minTurret: 12 positions VDI 30Equipment: automatic tailstock (Ø 80 mm), chip conveyor, parts collectorCountry of origin: GermanyCondition: used Auction-ID: A1-46647-232
CNC Control: FANUC 18i-TNumber of Axes: 5 (Twin-Spindle Configuration)Main Spindle: PresentSub-Spindle: Turrets: 2 Turrets with MotorizedTools Configuration: Combined Turning and MillingWeight (kg): Approx. 9000Year & Manufacturer: 2004 – HARDINGE Auction-ID: A1-46647-259
Max. turning length 1500 mm, feed rate 10 m/min, circulation diameter over bed 475-550 mm, circulation diameter over face slide 260 mm, incl. assortment of spare parts Auction-ID: A1-46781-27
1.200 € 
