subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Glass Bottle Filling Line, 3000 bph, with Markl Bavaria Counter Pressure Filler This complete bottling line was delivered by the German manufacturer Markl Brauereimaschinen in 2015 and is still in operation. The line consists of a semi-automatic bottle off-loading system, where new bottles are lifted layer-by-layer from pallets onto the feeding table. It also includes a VELA CW 30 linear labelling machine for self-adhesive, single roll-fed labels. The filling system is a Markl Bavaria type 12/3 VKL 12 counter-pressure filler equipped with 12 filling valves, a single air pre-evacuation system with CO₂, a rotating filler, and a 3-head crown capper. The highly efficient pre-evacuation vacuum is vented directly from the center of the bottles. Pressurizing CO₂ gas is introduced at the bottom of the bottle—precisely where the beverage flows smoothly into the container. The CO₂ cush ...
Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...
Glass Bottle Filling Line 1000 bph With Isobaric CICE Careddu Filling Block This CICE Careddu GOLD DPS 6/6/1C is a compact rotary triblock bottling machine integrating 6 rinsing stations, 6 isobaric filling valves, and 1 crown capping head for hygienic packaging of beer in glass bottles. The system ensures controlled counterpressure filling to with air pre-evacuation with CO2 maintaining carbonation and minimizing oxidation during the bottling process. Filling block has Siemens S7 PLC control system. Filling bloc has CIP system for sterilizing equipment inside and outside with 85C hot water. The line contains also rotating infeed table where empty bottles are manually places, CICE Careddu Compatta labelling station for self-adhesive labels. It has a one roll fed label station and it is intended for the application of one label per product, typically used for front labelling, ide ...
Fully Automated Craft Brewery 30hl/brew with Meura Mash Filter This fully automated 30 hl craft brewery, installed in 2015–2017, is in excellent condition and represents high-end European brewing technology. The system is a complete, turnkey solution including all necessary auxiliary equipment. The brewery is still installed and fully operational. The brewhouse has a capacity of 30 hl per brew and is capable of producing approximately 6–8 brews per day. It features a traditional three-vessel configuration equipped with a Meura mash filter for efficient wort separation. The brewery has been used to produce a wide range of both filtered and unfiltered beer styles. The cold block includes 3 × 75 hl fermentation tanks and 2 × bright beer tanks. Additionally, the system is equipped with advanced beer filtration capabilities, including a GEA centrifuge (unitank-compatible), kie ...
Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI. Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5
Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained. Technical details Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm Weight: 15 t Operating hours: 44.736 Bottles Volume: 200 ml - 2000 ml Max. Diameter: 115 mm Max. Length: 350 mm Preforms Length: 60 - 200 mm Max. Support ring diameter: 35 mm Scope of delivery Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)
A complete filling line with a 12-position gravity and vacuum filler with integrated twist-off capper for the food industry is available. Filling stations: 12, design: rotary machine, liquid viscosity: thin-medium, filling capacity: approx. 2000bottles/h, capping capacity: approx. 1000-1200/h, containers: heat-insulated, container volume: 35l/50l. This is a complete filling line including conveyor belts, accumulation table, sensors, rotary tables, pumps and format parts. The system was taken out of operation in 2024. Documentation available. An on-site inspection is possible.
A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible.
Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg
Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...
Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainl ...
Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck ...
Beer Brewery Two Vessel VELO 15hl/brew, up to 4000hl/annum Complete two-vessel beer brewing line manufactured by Italian VELO (now part of TMCI Padovan), suitable for producing a wide range of beer styles—from ales and lagers to non-alcoholic beers and high-strength varieties such as Imperial Stouts over 10% ABV. The standard brew size is 1,500 liters, with the capability to produce two brews during a 10-hour day in peak season. The maximum malt load per batch is 600 kg. Without sugar addition, wort strengths range from 18.5° to 21° Plato; with sugar addition, up to 35° Plato. A complete brew cycle, including CIP, takes approximately 5–6 hours. In regular operation, brewing batches have been overlapped: once lautering and spent grain removal from the first batch is complete, the next brew begins. With 10-hour working days, the maximum weekly capacity is six brews (three ...
Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,
Closure conveyor, Fabr. Gassner, 1 basement for crown caps with magnetic vertical conveyor, as well as 1 basement for screw caps with inclined belt stud conveyor; with sealing distributor diverter for crown corkers and screwers, 15 m conveyor belt, emptying pipe, control cabinet, dismantled and stored
Two upright stainless steel tanks with flat cone., Additional title: vertical flatconical stainless steel tanks, Volume: 18140 l, Operating pressure: 0,5 bar, Operating temperature: 20 °C, Width: 2,9 m, Height: 4,15 m, Material: Stainless steel, Position: Vertical, Base construction: 4 support legs, cylindroconical, Features: CIP-noozle
Bottling line for approx. 5000 bottles/h, Additional title: returnable glass bottle filling, years of construction 1990 - 2016, Capacity: 5000 bo/h, Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l, Position: free standing, Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank
Two horizontal stainless steel tanks with various fittings., Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal
Gassner closure loading system consisting of 3 basements (storage containers), with automatic cap loading for crown caps or aluminum roll caps on two cappers. The basements are filled using cardboard boxes., Additional title: crown caps, aluminum screw caps, Crown caps: 24000 pc/h, Aluminium screw cap: 24000 pc/h, Power: 1,7 kW, Voltage: 3 x 380 V, Length: 1,3 m, Width: 0,6 m, Height: 1,1 m, Weight: 70 kg, Material: stainless steel, Base construction: Rectangular storage container with lid, base made of square tube, Features: level indicator , Periphery: 3 magnetic transport-tapes (approx. 3 m / 14 m / 2 m)
Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...
plate filter, 60 x 60 cm with 142 plates, manual pressing., Number of plates: 142, Length: 3,6 m, Width: 0,8 m, Height: 1 m, Weight: 2000 kg
Activated carbon filter for the treatment of drinking water after treatment with chlorine dioxide, with pressure gauge and various connections., Additional title: drinking water treatment, Volume: 2250 l, Max. working temperature: 120 °C, Max. working pressure: 6 bar, Width: 1 m, Height: 3,5 m, Weight: 300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: pressure gauge, various connections
Stainless steel tank with two dished heads and a central outlet, fitted with a level gauge, a cleaning pipe and a manhole., Additional title: Vertical stainless steel tank, Volume: 18500 l, Width: 2,9 m, Height: 3,25 m, Weight: 1300 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, level indicator, CIP-pipe, manhole
Vertical cylindrical-conical tank with insulation and aluminium trapezoidal sheet metal cladding., Additional title: vertical insulated tank, Total content: 13600 l, Position: standing on 4 feet, Base construction: cylindrical tank with conical bottom, Features: Insulation
Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. pressure: 6 bar test pressure 7,8 bar, Max. temp.: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Base construction: vertical tank with dished bottom and pipe feet, Features: Shell-manhole, level-display-hose, tank fittings: sampler, spray ball, bunging device, pressure gauge, safety valve, vacuum flap
CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump., Additional title: Cleaning system with a heated CIP tank, CIP-Tank: 1500 l, Features: CIP tank, tube bundle heat exchanger, pump, piping
Crate washer for cleaning beverage crates using spray nozzles. Dimensions of the crate inlet: 31 x 37 cm (width x height), Capacity: 600 crates / h, Power: 8 kW, Length: 2,93 m, Width: 1,70 m, Height: 1,60 m, Formats: crate-formate 400 x 300 x 300, Running direction: from left to the right
Water softening system from Berkefeld: Ion exchanger for reducing calcium and magnesium hardness with 2 filter tanks and brine tank. Suitable for continuous operation. Year of manufacture: 1993 Capacity: 6000 l/h, Additional title: ion exchanger
Two vertical stainless steel pressure tanks with insulation and sheet metal cladding., Additional title: Vertical, insulated pressure tanks from stainless steel, Volume: 18000 l, Allowed pressure: 4 bar, Allowed temperature: 25 °C, Test pressure: 4 bar, Weight: 2220 kg, Material: stainless steel, Base construction: with vertical tank with dished bottoms and pipe feet, insulation and sheet metal cladding, Features: shell-manhole, nozzle for sampling
1 Combi-Filter Seitz, type Orion 100 Year of construction: 1982 Output: 100 hl/h complete with beer pump, conductivity measurement, dosing vessel, Control cabinet, switching panel, KG collecting pan with conveyor and disposal pump., Additional title: Kieselguhr and sheet filter, Filtration capacity: 10000 l/h, Filterarea kieselguhr appr.: 35 m², Length: 5200 mm, Width: 1320 mm, Height: 2250 mm, Formats: 1 m x 1 m filter plates, Material: Stainless steel, Position: Horizontal, Base construction: Frame filter, Features: Hydraulic filter compression; altguhr conveyer: up to 200 Filter sheets or 55 kieselguhr plates and 56 filter sheets
