饮料机 二手 出售 (2,154)

Used revised Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a revised Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 9,000 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2008Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hour ...

使用过的克朗斯CSD加注管，用于玻璃36000 BPH 技术规格与性能数据 2012年克朗玻璃CSD全套装水线，额定容量为36,000瓶/小� �，1.0升格式，配备70阀等压填充器和18个盖头。这台CS D装瓶机有动力，准备运行，显示工作时数为759小时。 制造商：克朗斯 制造年份：2012 名义容量：36,000 bph 产品类型：碳酸软饮料（CSD） 容器类型：玻璃瓶 瓶颈处理：28毫米 容量容量：1.0升 冲洗头/喷嘴：90 加油阀：70（CSD用等压填充） �

二手Sidel补充水装满线，PET 36000 BPH环境规格与性能数据 该装瓶线是一种高效PET静水生产系统，专为工业包装� ��饮料生产设计。它以0.55升的容量和30/25的PCO1881口径� ��理设计，名义输出为每小时36,000瓶。主要设备包括� �台20腔的Sidel SBO20吹塑机、一台配备60个加油阀和15个封盖头的Sidel EUROPA WM填充单块机，以及一台Krones Contiroll HS标签机，实现高速连续运�

使用过的Krones装瓶线，用于玻璃啤酒，容量60,000 BPH，环境规格与性能 Data2009,009系列，额定为每小时60,000瓶，适用于0.45升玻 璃啤酒，采用等压填充，从顶部边缘起为45毫米的装� �高度。这种二手啤酒装瓶设备整合了洗涤、检验、装 填/封盖、巴氏杀菌、包装、托盘化和输送等连续操作 。生产速度：每小时60,000瓶 容器类型：琥珀色玻璃啤酒瓶 瓶装容量：0.45升（名义）;满溢 0.464 升 ± 4 毫升 填充高度：距顶部边缘45毫米 主填充/封盖：Krones MECAFILL

二手SIG CSD罐装线30000 BPH结构规范与性能数据该装瓶线采用由Krones和SIG Simonazzi设计的工业部件，适用于二手工业包装和饮料� ��产环境。经过验证的数据板提供支持集成和鉴定的� �键技术价值。建造年份：2003年 电力供应：400伏，三相 频率：50 Hz 额定电流：37 集体电路额定（ICW/ICU）：1.26千 英里 防护容器容量：504升 测试压力（PT）：11.44巴 允许温度范围（TS）：-4摄氏度至50�

2018年完整CSD罐装线 - 24,000 bph技术规格与性能数据 该完整CSD罐装线是二手的装瓶线，专为铝罐配置，设� ��为可靠的饮料生产。该系列由中辰制造，旨在为工� �包装规模的碳酸软饮料提供稳定的质量。它配备了从 混合到下游包裹的全面设备，实现顺畅、连续的运行� ��生产速度：24,000 bph 集装箱类型：铝罐 可用容量范围：0.33L 产品：CSD

二手四乐盒装配线 TBA 19 200毫升薄装技术规格与性能数据 这款二手装瓶线是二手四乐盒装，专为200毫升薄包装� ��计。该厂专为工业包装和饮料生产牛奶和果汁产品� �计，性能可靠，下游处理高效。配置：Tetra Pak TBA/19 200B Slim填充器+TSA21吸管施用器+TCP70包装机+输送线+线控制� ��和纸质推车。生产速度：最高7,500包/小时包装容量� �200毫升。Slim填充技术�

二手GEA Procomac无精灌装线48000 BPH技术规格与性能数据 该装瓶线是GEA Procomac为工业包装和饮料生产设计的高性能无菌PET解� �方案。该产品线设计为二手采购，且不牺牲技术完整 性，配备干式无菌技术和集成水果块投药能力，额定� ��能为48,000英式每小时。额定容量：48,000 BPH 化粪方式：干式无菌 容器规格：0.23升（两种不同模具） 瓶颈和盖子：38毫米瓶颈，双层38毫米瓶盖 鼓风机：SIPA�

技术规格与性能数据 这条完整的PET热装瓶系列是为果汁应用设计的高效二� ��装瓶产品线。该厂主要建于2010年，下游设备自2011年 起配备，稳定产能达到每小时24,000瓶（bph）。该产品� ��整合吹气、热灌装、封盖、标签、二次包装和托盘� �，为饮料生产和工业包装需求提供统一解决方案。生 产速度：24,000 bph 主要应用：热灌果汁 容器处理：PET瓶 验证格式示例�

二手Mesal搅拌机10000lt - 2011年技术规格与性能数据 这款预混混合器专为需要精准糖浆混合、水混合和可� ��碳酸化的饮料生产环境设计。该装置由MESAL于2011年� �造，结合了自动化过程控制与可靠的结构，确保在工 业包装和二手装瓶线应用中取得稳定效果。它支持冷� ��行，高效吸收二氧化碳，并提供稳定的碳酸，适合� �酸软饮料的制作和调味饮料。制造商：MESAL 模型：WPM

乳制品加工与灌装线，日产量不超过20,000升，该处理� ��高效管理每日15,000至20,000升牛奶的体积。因此，它� �保了高效率和最高品质的成品。因此，其产能实现了 高日产量回报率，这对大规模运营至关重要。包装能� �� 此外，该系列的专业包装系统能够熟练地处理各种乳� ��品。例如，工人以每小时2400个牛奶的速度，用1.0升P VC袋包装牛奶。此外，他们还会包装酸�

食用油装瓶管 6000 bph 装瓶管线一般配置 6000 bph 食用油装瓶管线 1升PET瓶中加工食用油，标称速度为每小时6000瓶。该� �置包含多家制造商的设备，集成以确保在填充、标签 、包装和托盘装卸过程中的连续运行和可靠性。运营� ��于2022年12月正确关闭了整个系统。目前，这些机器� �被拆解并存放在合适的条件下。因此，这条线立即�

二手流式巴氏杀菌机配2000 L/h分离器 结构与工作原理 带2000 L/h分离器的二手流式巴氏杀菌机作为连续流巴氏杀菌� ��，配备板式热交换器，专为牛奶和奶油的热处理设� �。该系统采用板式热交换器，确保高效的热传递，实 现产品的快速加热和制冷。因此，它在最大化能源效� ��的同时，保持了产品质量。此外，连续运行可稳定� �出每小时2000升的吞吐量。因此，该模型适合中等比�

小型乳制品二手加工线 2000升/小时 牛奶接收与初始储存 小型乳制品二手加工线 2000 L/h的牛奶接收单元始于一个由两个乳酸冷冻罐和一个� ��收泵组成的牛奶接收单元。最初，操作员将生乳引� �罐中，保持冷藏状态。因此，系统在加工前确保热稳 定性。此外，这种设置最大限度地减少了细菌负荷，� ��时允许持续转移到巴氏杀菌阶段。巴氏杀菌与分离 接下来，巴氏杀菌阶段使用板式换热�

阿尔法拉瓦尔巴氏杀菌机——概述 这款二手阿尔法拉瓦尔巴氏杀菌机设计用于乳制品液� ��的持续热处理，确保产品安全及下游加工和包装的� �定质量。由阿尔法拉瓦尔工程制造，它为饮料生产和 乳制品运营提供可靠的性能，适合二手装瓶线或工业� ��装环境。其产能范围为3,000至5,000升/小时，非常适合 中规模生产用于奶酪、酸奶、酸奶油和山羊奶的牛�

Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle format ...

Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...

物品编号：Velo-400-20-MC - 使用带有19个滤芯板的酵母滤芯封闭边缘，总长度约2 300毫米 - 总过滤面积5.3平方米，总油量66升。 - 配备新型单丝滤布（编号1001.6439） - 配备隔膜泵 1800升/小时 - 带滴水盘 - 配备新型手动液压泵 - 压力开关、压缩空气连接、安全阀 - 按需要使用葡萄酒线 - 1年功能保�

Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consu ...

Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Free air delivery: 2,100 m³/h (35 m³/min) Operating pressure: 40 bar Design pressure (PS): 42 bar Speed: 480 rpm Shaft absorbed power: 355 kW Voltage: 400 V Year of manufacture: 2003 Application: PET bottle blowing Scope of delivery 1 × High-pressure compressor 40 bar CE68 ASG 1 × Refrigeration dryer 1 × Electrical control cabinet Condition Still installed and electrically connected Available for inspection on site Availability Immediately available.

Schneider TS VA I agitatorHollow-shaft agitatorSuitable for tank volumes up to: 30,000 litresVoltage: 400 VSpeed: 1,450 rpmMotor rating: 0.75 kWWeight: 14 kgManufacturer article no.: 42Equipment and features:- Motor protection switch- 10 m cable with CEE 16 A plug and phase inverter- Insertion tube- Threaded connection can be selected as required- Stainless-steel carrying handle- Rubber feet for safe placement on the floor- Agitator shaft in 800 or 1,000 mm length, special lengths on request- Quiet and vibration-free operation- Precise agitator-shaft guidance through the hollow-shaft motor- Dry-running mechanical seal rated up to 10 bar and 100 °C- Robust stainless-steel construction, easy to clean

Schneider TS VA II agitatorHollow-shaft agitatorSuitable for tank volumes up to: 50,000 litresVoltage: 400 VSpeed: 1,450 rpmMotor rating: 1.1 kWWeight: 18 kgManufacturer article no.: 720Equipment and features:- Motor protection switch- 10 m cable with CEE 16 A plug and phase inverter- Insertion tube- Threaded connection can be selected as required- Stainless-steel carrying handle- Rubber feet for safe placement on the floor- Agitator shaft in 800 or 1,000 mm length, special lengths on request- Quiet and vibration-free operation- Precise agitator-shaft guidance through the hollow-shaft motor- Dry-running mechanical seal rated up to 10 bar and 100 °C- Robust stainless-steel construction, easy to clean

Schneider TS VA I Evario agitatorHollow-shaft agitatorSuitable for tank volumes up to: 30,000 litresVoltage: 400 VSpeed: 1,450 rpmMotor rating: 0.75 kWWeight: 17 kgManufacturer article no.: 865Equipment and features:- Kostal frequency inverter mounted directly on the motor- Continuously variable speed control- 10 m cable with CEE 16 A plug- Threaded connection can be selected as required- Stainless-steel carrying handle- Rubber feet for safe placement on the floor- Agitator shaft in 800 or 1,000 mm length, special lengths on request

碳酸软饮料PET瓶装满系列 制造商：SIPA / PROCOMAC 制造年份：2009年 地点：德国 供应时间：自2026年10月起 该线路目前仍在运行，生产过程中可进行检查。 技术细节： 容量：约每小时12,500瓶 瓶装容量：500毫升、750毫升、1500毫升 琴颈处理： PCO 28 / 1881 额外750毫升，带运动帽（PCO 1881） 包括： 1. 8腔SIPA SFR 8吹气机 包括预备食品供给系统 包括冷水机，但无预制卸载装置 无高压压缩机 2. 气流输送机GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 配备50个冲洗站、70个加水阀和12个加水头 塑料螺丝盖 包括围绕机器类型的完整克莱恩房间 ISO 5”， 包括两个分拣单元， 包括填充后瓶子干燥站， 包括填充高度控制和填充后盖控制， 包括氮加量系统（适用于无二氧化碳产 ...

Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SIPA (Italy) Model: SFR 8 Year of manufacture: 2009 Machine type: rotary stretch-blow moulder for PET bottles Number of cavities: 8 Output: up to 12,400 bottles/hour Bottle formats: 0.5 l, 0.75 l and 1.5 l Neck finish: 28 mm / 1881 (short neck) Electrical connection: 400 V, three-phase Total ...

Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machines controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12 touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data Manufacturer: Ortmann + Herbst Model: Hansa B 100/20 Year of manufacture: 1994, completely refurbished 2013 Machine type: rotary filler with screw capper,  ...

特色： 第3150卷 材料编号 V2A 最大工作超压0.99巴 总高度：3000毫米 直径1300毫米 外径1400毫米 2B内部的表面=IIIC接地 2B外的表面=IIIC接地 工作温度 20摄氏度 汽缸长度：2000毫米 描述： 表土： 拍板底 螺纹喷嘴 DN40 中央 螺纹喷嘴 DN40 侧 止回阀 圆柱体： 440 x 340椭圆形井盖 样品分头DN15 梯形钩 下扫CIP管DN40，带盘阀和压力表 带盘阀的螺纹焊接喷嘴DN25 带进出口的冷却盘管 3/4英寸 盲套法兰颈 DN125 底盘： 拍舌底/弧背 前引残留排水管，盘阀DN50，紧贴罐壁 三轮廓脚配卡洛特——高度可�

特色： 第2750卷 材料编号 V2A 最大工作超压2巴 总高度：2850毫米 直径1540毫米 外径1550毫米 2B内部的表面=IIIC接地 玻璃珠外表面喷砂 描述： 表土： 拍舌底/弧背 法兰盖直径450毫米 连接溢流管DN40横向出水 带碟阀的螺纹焊接喷嘴 DN65 螺纹焊接喷嘴 DN65 2个螺纹焊接套筒 DN25 圆柱体： 梯形钩 向下拉的CIP电缆DN40 4 x 冷却盘管，宽 70 毫米 温度传感器费舍尔 焊接套筒 DN15 底盘： 锥形底座，带35厘米高的冷却套 侧螺纹焊接喷嘴 DN32 三轮廓脚配卡洛特——高度可调 剩余排水DN50

Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Manufacturer: M+F KEG-Technik Model: MICROMAT M 1/1-F KeyKeg Year of manufacture: 2011 Machine type: semi-automatic KeyKEG filling machine Capacity: 50-60 KeyKegs per hour Container formats: 20 l and 30 l KeyKEG Fitting type: KeyKEG fitting Connection voltage: 230/400 V, 50 Hz Equipment EC Declaration of Conformity (Machinery Directive 2006/42/EC) Technical documentation Condition Used. The machine has already been disman ...

Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: TF350 Year of manufacture: 2009 Machine type: tray packer for PET bottles Output: 45 - 50 packs/min Adhesive system: Nordson ProBlue 4 hot-melt unit Packaging material: flat cardboard blanks Guarding: full safety enc ...