beverage machines used for sale (2,658)

Cylindroconical fermentation and storage tanks, standing on four feet, with a maximum operating pressure of 2.5 bar. The tanks are each equipped with frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap and temperature control., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 50 °C, Height: 2800 mm, Material: stainless steel 1.4301 (AISI 304), Position: standing on 4 feet, Base construction: cylindroconical, Features: cooling jackets, insulation (50 mm chloride-free PU foam) cleaning line, 2 outlet lines with manual valves, pressure gauge, bung apparatus, hose level indicator, temperature control, sampling tap

Overview The blowmoulder was built in 2017 by the manufacturer SIPA. The machine is until February 2026 in operation and can be visited. It is used in a mineral water factory. The blowing machine is in a very good condition due to regular maintenance. Technical data  Nominal capacity: 18.000 bph Nr. of moulds: 8 Last used formats: 0,5l 1,0l 1,5l Neck type: PCO-28-1810 Incl. preform feeding system Incl. preform cooling system Min. - max. bottle diameter: 50 - 125 mm Min. - max. bottle height: 80 - 349 mm

Additional title: in various designs

Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) Formats possible: 250 ml – 1,000 ml Formats included: 330 ml and 500 ml long neck bottles Bottle cap type: 26 mm crown caps Execution: Filler/capper: Modulblock 10/1-C Labeler: LLAC-R-SQ (VAR STEP) Additional features: Hot foil stamper (added later) CIP dummy bottles Change parts for 330 ml format

half-stripped, Additional title: vertical stainless steel tanks, Volume: 5000 l, Operating pressure: 12 bar, Operating temperature: 20 °C

Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Capacity: 6 x 1,000 liters Working pressure: up to 3 bar Diameter: approx. 125 cm Height: approx. 190 cm Base design: conical base with 30° angle Type: Isobaric fermentation and maturation tanks with cooling jacket With integrated cooling jackets With decorative wooden cladding (removable) Scope of delivery  6 x Talleres Perman DI1 | Year of construction 2014 isobari ...

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling Atmospheric Fermenter (Unit 1) | Magusa  ...

2 tanks on skirt, content 10,5 hl, working pressure 3 bar, incl. fittings, Additional title: 2 x tanks, Volume: 10 hl, Max pressure: 3 bar, Temperature: 10 °C, Width: 1,2 m, Height: 1,9 m, Material: stainless steel, Position: horizontal, Base construction: on skirt, Features: 1 manhole and 2 connections on top, 1 side- and 1 bottom-outlet, 1 gas piping, 1 sampling point, All connections with fitting.

Overview  This complete filling line for glass bottles was part of a brewery and consists of a filler and capper block, labeler and a carton capper. The entire equipment was built in 2016 and has already been dismantled and stored. Scope of delivery Isobaric Filler & capper | cimec | AM DPS 811G | 2016 Output: 1,200 bph (at 0.33l) Designed for 0.33l glass bottles Labeler | murcia codificacion | MC-220 | 2016 Output: 1,300 bottles/h Adaptable to 1.5L bottles Carton sealer | Siat | SK2 | 2016

3-device compact brewhouse for 20 hl output, Additional title: 20 hl compact brewing system, Brew size: 2000 l, Length: 2600 mm, Width: 5000 mm, Height: 4500 mm, Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l, Material: stainless steel / copper, Base construction: Brewing vessels mounted on frame construction, Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Overview  This monoblock bottling system was manufactured in 2017 by the Italian company GAI. The MLE 661 BIER 003 integrates rinsing, isobaric filling, capping, and labeling in a single compact and fully automatic unit. The line also includes an ENOS Compatta labelling machine from the same year. The equipment is in good condition and immediately available. Technical data  Capacity: Still beer: ~750 L/h ≈ 1,000 bph (0.5 L format) Sparkling beer: ~525 L/h ≈ 1,200 bph (0.33 L format) Application: Still and sparkling beer Bottle Formats: 0.25 L – 1.0 L glass bottles Capping Types: 26 mm and 29 mm crown caps Rinser Heads: 6 Filling Heads: 6 (isobaric system) Capping Heads: 1 Structure: Stainless steel frame and hygienic components Operation: Fully automatic with synchronized control Scope of Delivery  Monoblock (rinser–filler–capper) | GAI | MLE 661 BIER 003 | 2017 | Isobaric f ...

Horizontal pressure tanks on transport frame with fork guides, equipped with cooling jacket, outlet pipe with manual valve, pressure gauges and sight glasses., Additional title: Horizontal, coolable, insulated stainless steel tanks; years of manufacture: 199, Gross volume: 1000 l, Max. overpressure (2 pcs.): 3 bar test pressure: 3,9 bar, Max. overpressure (1 pc.): 2 bar, Material: Stainless steel, Position: Horizontal, Base construction: On stainless steel frame with fork guidances, Features: Drain pipe, sight glasses, pressure gauge

Overview This filling machine from the German manufacturer ALWID is equipped with 8 filling heads and is specifically designed for filling small-volume bottles (100 ml). Precise dosing is achieved using mass flow meters (Coriolis principle) from the reputable manufacturer Endress+Hauser, ensuring high accuracy and repeatability. Technical Specifications: Manufacturer: ALWID Number of filling heads: 8 capacity: 8.000 - 10.000 /h working direction: right-left Filling volume: Designed for 100 ml (other volumes may be adjustable) Dosing system: Mass flow meters by Endress+Hauser Typical application: Low- to medium-viscosity liquids Key Features: Hygienic design for easy cleaning (CIP) Suitable for pharmaceuticals, cosmetics, food, or chemicals High filling accuracy thanks to mass flow technology adjustable filling lance movement

Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air syste ...

Overview  The machine was built in 2004 by the German manufacturer Langguth and is completely overhauled. The pictures do not correspond to the actual machine, but are well comparable and representative.  Technical data  Gluing height up to 210mm Completely overhauled as shown on the pictures, but with base frame made of steel. Including 2 bottle formats+ 2 label formats Optional with take off turntable

Vertical sedimentation tank made of stainless steel. Capacity: 80 hl, Additional title: Vertical stainless steel tank, Content: 8000 l, Width: 2100 mm, Height: 6000 mm, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with dished bases, on square tube feet, Features: Manhole in the frame, central bottom outlet

Overview The OPP labeller Krones Contiroll HS was manufactured by Krones in 2014. It was used in a dairy plant in the Philippines. It was used for cans, filled with milk. The cans had the dimension 209mm x 208mm. As the machine became redundant, it is for sale now. The machine is already disassembled, but can be inspected. Full technical information is available. Tech Specs: Capacity: 36,000 uph Control: Siemens S7 Number of aggregates: one Container dimension: 209mm x 208mm Dimensions: Height: 2450mm Length: 2800mm Width: 3230mm

Insulated cream ripener tank made of stainless steel. With agitator and heating/cooling surfaces Capacity: 125 hl, Additional title: Heatable stainless steel tank with agitator, Content: 12500 l, Width: 3,1 m, Height: 4,2 m, Material: stainless steel, Position: free standing, Base construction: Cylindrical tank on tubular feet, Features: Insulation with welded stainless steel panelling, manhole and anchor agitator on top, sampler

Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003          Preforms feeder                                                              Preforms tipper                                                               Transporters | AVE | 2004              Injection and blowing | Nissei ASB | PF4-1BH |2000             Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004               Lot Coder | Marken | Smartlase 110i | 2009            R ...

Horizontal, heatable and insulated stainless steel tank with pressure gauge, safety valve, level indicator, cleaning line and valves., Additional title: horizontal, insulated, for liquid sugar, Volume: 20800 l, Operating pressure: 1 bar, Operating temperature: 20 °C, Material: stainless steel, Position: horizontal, Features: insulation pressure gauge, safety valve, fill level indicator, cleaning pipes, valves

Overview This fully automatic linear self-adhesive labelling machine was manufactured in 2019 by the German company b+b Automations- und Steuerungstechnik GmbH. The b+b RAPID SM system is designed for precise and reliable labelling of formed glass containers using pressure-sensitive (self-adhesive) labels. The machine is suitable for the application of seal labels, side labels and back labels on small to medium-sized glass containers and is designed for continuous industrial operation. Thanks to its modular design, pneumatic product handling and modern Siemens S7 PLC control, the system offers high flexibility and stable performance. The machine is in good condition, has been regularly maintained, and is fully functional. Technical Data Capacity: Up to 40 pcs/min (depending on container size) Formats: Formed glass containers (approx. 0.05 l – 0.7 l) Labelling Type: Self-adhesive (press ...

Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you., Additional title: Post-filtration, Material: stainless steel, Position: free standing, Base construction: Cylindrical housing on tubular feet with spherical caps, Features: Pressure gauge, housing with clamping screws or clamping ring

Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate.

upright, insulated stainless steel CIP tank with 6 containers arranged one above the other. The total capacity is 500 hl., Additional title: vertical stainless steel tank, Contents 2 zones each: 10000 l, Content 1 zone: 14000 l, Width: 3000 mm, Height: 12087 mm, Material: stainless steel, Position: free standing, Base construction: 6 cylindrical tanks arranged one above the other with conical bottoms,, Features: ladders and platforms with guard rails, manhole in the covers, shell insulation with welded stainless steel cladding, collecting overflow,

Overview  This complete 600L brewhouse and fermentation line was manufactured between 2009 and 2014 by Cespedes (Spain) and Cerveza Artesana SL. It includes mashing and boiling kettles, fermenters (both isobaric and atmospheric), utilities, and packaging equipment. The line was used for small-scale craft beer production and remains in good overall condition, available immediately. Technical data Main Manufacturers: Cespedes, Cerveza Artesana SL, Stellin, Duofiller Year of Manufacture: 2009–2014 Capacity: 600L brewhouse / fermenters up to 1,200L Heating System: Electric resistances (mash & boil kettles) Filling System: Semi-automatic can and bottle filling Utilities: Includes pumps, heat exchanger, and carbonation equipment Condition: Good, complete and ready for installation Scope of Delivery  Mashing tun | Cespedes | – | 2010 | Dimensions in cm: 200×110×110 | 600 L, electrically ...

Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. working overpressure: 6 bar test pressure: 7,8 bar, Max. working temperature: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Position: standing on 3 pipefeet, Base construction: bottomed shells, Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap

Overview  This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person.  Scope of delivery  Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS