We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
APV Gaulin Homogenizer LAB 200/350/200/3 350 ltr./h, max. pressure: 350 bar
used
Used 2-stage APV GAULIN G-37 homogeniser with 5000 L/H capacity and 200 Bar pressure. Year of manufacturing: 2005 Used in dairy plant on homogenising milk. Very good condition. Running condition. Tested on water.
used
Manufacturer: APV Gaulin Type: MC30 Capacity: 12.000 l/h Pressure: 210 bar Condition : Fully refurbished in 2018 in very good condition includes control panel with soft starter
used
Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,
used
We are offering a used milk homogenising, APV Gaulin MC of 7 it is in good condition and what running in a dairy up until lately. The homogeniser can be inspected near Berlin.
used
Type: MC 18 - 3TPS Capacity: 5.000 l / h Max working pressure: 200 bar Motor: 55 kW Electric: 380 V / 3 phase / 50 Hz
used
Brand: APV Type: 15M capacity: 50 l / h Stages: 2 stages Max pressure: 8000 PSI (550 bar) Power: 2.2 kW (3HP)
used
Brand: APV Gaulin Type: MC 18-3TPS capacity: 7.500 l / h YOM: 1993 Max working pressure: 200 bar Motor: 55 kW Dimensions: 165 cm x 130 cm x 130 cm (Lxwxh) Electric: 380 V / 3 phase / 50 Hz Stages: 1 stage
used
Brand: APV Gaulin Type: MC 45-5TPSX capacity: 7.500 l / h current pressure: 345 bar Stages: 1 stage Dimensions: 215 x 152cm x 160cm (Lxwxh) YOM: 1982 Engine: PLS 280M; 90KW; 975 r/min; 380 V; 176 amp; 50 Hz
used
Used homogenising Brand: APV Gaulin Type: MC45-5TPS capacity: 11,600 l / h Dimensions: 215 cm x x 130 x 165 cm (Lxwxh) Country of origin: Germany YOM: Max working pressure: 345 bar Piston diameter: 54 mm Valve: Poppet valves including control panel
used
Brand: APV Gaulin Type: MC 120-3TPS capacity: 20.000 l/h pressure: 205 bar Stages: 2 Dimensions: 170cm x 130cm x 175cm (LxBxH) Country of Origin: Germany YOM: 1993
used
2 Step Aseptic High Pressure Homogenizer; 5 pistons complete with pulsation dampers and hydraulic pressure control; Disassembled/ready for transport
used
This APV Gaulin 4359 MC 120-3TBS homogeniser is a 5-cylinder machine which is designed for 13.500 liter per hour with a maximum pressure of 206 bar. The homogensier is equipped with 2-stages with ball valve cylinder. Manometer. Motor: 132 kW - 380 V - 1.480 rpm - 50 Hz. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 13.500 liter per hour, Stages: 2 stages, Max. Pressure: 206 bar, Valve cylinder: Ball valves, Motor: 132 kW - 380 V - 1.480 rpm - 50 Hz, Dimensions: 210 x 160 x 160 cm, Weight: 5.900 kg
used
This APV Gaulin MC120 homogeniser is a 5-cylinder machine which is designed for 25.000 liter per hour with a maximum pressure of 210 bar. The homogensier is equipped with 2-stages with poppet valve cylinder and a MICRO-GAP homogenizing valve assembly which is especially for non-abrasive, low viscosity dairy products. The highly efficient MICRO-GAP valve will enable to operate at up to 40% lower pressure, while giving you the same or better product quality and saves energy and reduction in the machine drive-end loading. Manometer on both stages. Piston diameter: 70 mm. Motor: 160 kW - 380 V - 281 Amp - 50 Hz - 1483 rpm. Oil pumping system inside the machine. Stainless steel cladded. Feetplates available. Note: the head is cracked, needs to be repaired / renewed., General application:, High pressure homogenizers are used to break up the fat globules contained in the milk under high pressur ...