Производитель:
(Категория: 706)
Complete line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of manufactu ...
Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...
Бак для заваривания воды объёмом 53 700 литров с изоляцией, построен в 2022 году Материал No V2A Общая высота 10500 мм Высота 9700 мм Диаметр 2800 мм Внешний диаметр 3230 мм Внутренняя поверхность 2B=IIIC грунт Внешняя поверхность 2B=IIIC грунт Год строительства 2022
65 900 литров ZKG — резервуар/ резервуар под давлением/резервуар LARGE с охлаждающей рубашкой и изоляцией Материал No V2A Общая высота 12400 мм Диаметр 3000 мм Внешний диаметр 3480 мм Внешняя поверхность 2B=IIIC грунт Внутренняя поверхность 2B=IIIC грун
1000-литровый изолированный пивной бак/резервуар с вставным нагревателем Материал No V2A Год строительства 1998 Общая высота 2060 мм Диаметр 1000 мм Внешний диаметр 1150 мм Изолированное исполнение Верхний слой почвы: Наполнительная труба DN25 Резьбовая посадка 1 1/4" Вентиляционное сопло DN80 Цилиндр: Изоляция 50 мм Сварное соединение DN40 тангенциальное (латеральное) Вставной нагреватель Резьбовая сварная фитинг DN15 Нижняя часть корпуса: Загнутый/изогнутый конец Вперёд удлинённая остаточна ...
51 570-литровый резервуар для льда/бака под давлением с изоляцией Материал No V2A Общая высота 10200 мм Диаметр 2900 мм Внешний диаметр 3480 мм Внутренняя поверхность 2B=IIIC грунт Внешняя поверхность 2B=IIIC грунт Минимальное/максимальное рабочее давление (HP) 0,4 бар Рабочая температура 90 °C Длина цилиндра 6500 мм Год строительства 1994 Защищённый конец / купольный конец Цилиндр: Изоляция 15 см 4 x датчика Овальный люк 440 x 340 Нижняя часть корпуса: Конец/куполообразный конец с ножным кольцом и глазом жу ...
68 150 литров ZKG для бака/бака под давлением/резервуаром БОЛЬШОЙ, с охлаждающей рубашкой и изоляцией Материал No V2A Год строительства 1995 Общая высота 10870 мм диаметр 3400 мм Внешний диаметр 3870 мм Длина цилиндра 6000 мм Внутренняя поверхность 2B=IIIC грунт Внешняя поверхность 2B=IIIC грун
68 150 литров ZKG — резервуар, резервуар под давлением, резервуар LARGE с охлаждающей рубашкой и изоляцией Материал No V2A Год строительства 1996 Общая высота 10870 мм диаметр 3400 мм Внешний диаметр 3870 мм Длина цилиндра 6000 мм Внутренняя поверхность 2B=IIIC грунт Внешняя поверхность 2B=IIIC грун
65 700 литров ZKG с охладительным оболочком и изоляцией Материал No V2A Год строительства 1990 Общая высота 10580 мм Длина цилиндра 5750 мм диаметр 3400 мм Внешний диаметр 3870 мм Внутренняя поверхность 2B=IIIC грунт Внешняя поверхность 2B=IIIC грун
Резервуар для технической воды UTH на 60 000 литров из горизонтальной изоляции V2A Свойства: Объем 60000 л Общая длина 6100 мм Длина цилиндра 4500 мм Общая высота 4300 мм Диаметр 4200 мм Материал V2A (AISI 304) 1.4301 Изоляция 150 мм Поверхность за пределами земли 2B = IIIC Поверхность внутри 2B = IIIC Горизонтальная конструкция Количество ног 4 Описание: Эмблема бака: Шарик CIP Вентиляционная насадка Впереди: Индикатор уровня со шкалой Люк 440 x 340 мм Лестничные крюки Остаточный дренаж с дисковым клапаном Т ...
Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 2 ...
Used Complete Krones PET Bottling Line â 22,000 BPH â OverviewUsed Complete Krones PET Bottling Line â 22,000 BPH â Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 ...
Technical Summary and Application Scope â ATES Giorgia 8000 bph The ATES Giorgia 8000 bph is a continuous-motion washing and rinsing system for glass bottles, suitable for both returnable and new bottles. It is designed for stand-alone use or seamless integration into existing or new bottling lines. Built primarily from AISI 304 stainless steel with plastic baskets and continuous-motion conveying, the machine ensures robust performance with industrial-grade safety protections. Main Technical Data Type: Industrial glass bottle washer and rinser, suitable for recycled and new bottles. Nominal output capacity: up to 8,000 bottles/hour depending on bottle format, contamination level, and line configuration. Materials: AISI 304 stainless steel structure; plastic baskets; stainless-steel doors and inspection windows. Mechanical composition: Shelves, baskets for bottle housing, and automat ...
Used Doypack Filling Line kg/h Filling Line Technical Configuration The used Doypack filling line, rated at 600 kg/h, comprises a series of 2015 machines that offer precision, hygiene, and reliability in filling flexible pouches. The process begins with product preparation and feeding, ensuring uniform consistency and stability before filling. Next, a FL Tecnics machine, model FL 2.2, handles pouch feeding, weight filling, sealing, and packaging. Specifically, a VARPE control system measures the weight of the product in each pouch with high precision, minimizing variations and waste. Simultaneously, another VARPE unit performs an X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a crucial level of safety and quality control. Meanwhile, a spiral airflow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, th ...
Overview The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled. Technical details Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge Rotary spraying Continuous machine Stainless steel body Documentation Software backup Stainless steel pumps Conductivity measurement Finger task Spare parts Bottle cell tips Bottle cell supports
Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Ma ...
Overview This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Eur ...
Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...
Overview This decrater was manufactured in 1993 by the German company Otto Fleischer. The Rota/1/A model is a single-head unpacking machine. It is still installed and immediately available. Technical data Bottle formats processed: 0.7L (GDB) and others one-head operation 90° infeed-outfeed design Operating pressure: approx. 6 bar Power supply: 380 V / 50 Hz / N / PE Connected load: approx. 4 kW Control voltage: 24 V
Overview This GALDI RG270-SDUC filling machine, manufactured in 2021, is designed for the forming, filling, and sealing of gable top cartons, suitable for ESL milk, fresh milk, cream, drinking yoghurt, fruit juice, and other liquid food products. The machine operates with a servo-driven volumetric double diaphragm filling system and a bottom-up filling process, ensuring high filling accuracy and product integrity. With a capacity of up to 6,500 cartons per hour, the system is suitable for medium-capacity dairy and beverage production lines. The unit is equipped with advanced hygienic features, including H₂O₂-based package sterilization, HEPA-filtered laminar airflow, and CIP capability, enabling extended shelf-life production conditions. Technical data Capacity: up to approx. 6,500 cph Filling volumes: 250 ml – 1,000 ml Carton format: 70 × 70 mm cross section Filling system: Ser ...
Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz
Overview The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time. Technical details Number of filling places: 48 Pitch circle diameter: 1560 mm Capacity (last): 250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized 160 - 200 bottles/ min at 250ml maple syrup Used plastic cap can be applied by installed AROL capper Dimensions Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg Electr. characteristics Voltage: 400 V - 50 Hz Auxiliary voltage: 24 V DC Installed power: 20 kW Scope of delivery Filler | ...
Overview This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery Meypack VP 531WA wrap-around packer
Overview This fill level inspection machine was manufactured in 2017 and the label inspection machine in 2015 by German company Vision-Tec. The pusher was made by German company BBULL. It is designed for checking the fill height, closure and label of full bottles. The machine is until October 2025 in running production. Technical data Capacity: Adjustable Scope of Delivery Fill level inspection system | Vision Tec | 2017 Label inspection system | Vision Tec | 2015 Reject system | BBULL
Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...
Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...
Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Technical data Filling points: 2 Filling valve diameter: mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry
Overview The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored. Technical Details Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Heig ...
Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Technical data Capacity: approx. 12,000 bottles/hour Speed range: approx. 3,000 – 18,000 bottles/hour Formats: 700 ml / 750 ml / 1,000 ml glass bottles Application: Labelling of glass bottles (spirits) Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) Label positions: Body (front), back, neck ring, additional labels Utilities: 400 V Scope of Delivery Labelling machine | GERNEP ...
Overview This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery Compressor | Atl ...
