subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Overview This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data Capacity: 10,000 bph Application: Juice Configuration: Gernep Labetta 4/3/10 640 2A Labelling technology: Cold glue / Rollina Labelling stations: 2 × cold glue aggregates Bottle Formats Container type: Glass bottles (fruit juice) Typical formats: 1.0 L VDF (H=307 mm, Ø90 mm) 0.5 L NRW (H=260 mm, Ø68 mm) Special capability: Suitable for hot-fill applications Label Data 1st cold glue station: Label length: approx. 25 – 140 mm Label height: max. 150 mm Lower edge: max. 15 mm Upper edge: max. 320 mm 2nd cold glue station (incl. wrap capability): Label length: approx. 25 – 140 mm Up to 170° wrap-around of bottle circumference Label height: ma ...
Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge
Overview The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003 Preforms feeder Preforms tipper Transporters | AVE | 2004 Injection and blowing | Nissei ASB | PF4-1BH |2000 Dryer Moretto | 2000 Loader Moretto | 2000 Heater Moretto | 2000 Transporters | AVE | 2004 Lot Coder | Marken | Smartlase 110i | 2009 R ...
2 horizontal stainless steel pressure tanks, each equipped with outlet pipe, pressure gauge and sight glasses. The tanks come with a saddle frame for installation., Additional title: horizontal stainless steel tanks mounted on scaffolding, Volume: 1050 l, Max. overpressure: 3 bar, Length: 2200 mm, Width: 800 mm, Height: 800 mm, Material: stainless steel, Position: horizontal, Base construction: with scaffolding for installing the tanks one above the other, Features: outlet pipe DN65, pressure gauge, sight glasses
Overview This PET bottling line consists mainly of equipment from GEA Procomac, complemented by machines from Arol, VBC, SMI, TwinPak, Robopac, SIPA, Logopak, Domino, Ventilo and PE Labellers. The line was mainly manufactured in 2009, with several later additions and upgrades between 2013 and 2022, including the pallet wrapper, labelling machine, Domino laser coding system and extraction unit. The line is suitable for beverage production in PET bottles and includes the key process steps from air conveying, rinsing, filling and closing to nitrogen dosing, tray-shrink packing, handle application, palletizing, pallet wrapping, pallet labelling, sleeve labelling, coding and extraction. Technical Data Line type: PET bottling line Capacity: 12.400 bottles/h Application: beverage filling in PET bottles Main manufacturer: GEA Procomac Main year of manufacture: 2009 Later upgrades / additions: 20 ...
2 horizontal stainless steel pressure tanks, each equipped with cooling coil and sight glasses. The tanks come with a frame for installation., Additional title: horizontal, coolable stainless steel pressure tanks, Volume vessel: 1200 l, Volume cooling coil: 4 l, Max. overpressure: 3 bar, Max. working temperature: 30 °C, Length: 2700 mm, Width: 900 mm, Height: 900 mm, Material: stainless steel 1.4301 (AISI 304), Position: horizontal, Base construction: each on saddle frame, Features: cooling coil, sight glasses
Overview This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system
Horizontal stainless steel pressure tanks with cooling jackets, sight glasses, outlet pipes and pressure gauges., Additional title: horizontal, coolable stainless steel pressure tanks, Volume: 1050 l, Max. working overpressure: 3 bar, Length: 2300 mm, Width: 860 mm, Height: 860 mm, Material: stainless steel, Position: horizontal, Features: cooling jacket, outlet pipe DN50, sight glasses, pressure gauge
Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available
Westfalia Separator, last used in a fruit juice plant. The separators control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit., Additional title: Disc centrifuge, Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h, Drum velocity: 6500 rpm, Density liquid phase: 1 kg/dm³ , Density solid phase: 1.4 kg/dm³, Power: 18.5 kW, Current: 37 A, Voltage: 380 V, Frequency: 50 Hz, Length: 1485 mm, Width: 850 mm, Height: 1470 mm, Weight: 1200 kg, Material: Stainless steel surfaces that come into contact with the product, Position: on a 685 x 585 mm foundation, Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, dra ...
Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Closure types: Crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Incl. dummy bottles and ...
This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm
Overview The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of han ...
Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment., Additional title: vertical stainless steel tank, Volume: 10560 l, Max. working overpressure: 6 bar test pressure: 7,8 bar, Max. working temperature: 10 °C, Length: 1900 mm, Width: 1900 mm, Height: 4770 mm, Material: stainless steel 1.4301 (AISI 304), Position: standing on 3 pipefeet, Base construction: bottomed shells, Features: Cleaning air/valve combination, cleaning line, CIP spray head, manhole, hose level indicator, sampling tap, pressure gauge, bunging device, safety valve, vacuum flap
Overview This Strapex Endra HC2T is an automated pallet strapping and wrapping system, designed for securing palletized goods using horizontal strapping and wrapping processes. The machine combines a turntable-based wrapping system with horizontal strapping (banderoling), enabling stable and transport-secure pallet units. It is suitable for applications in beverage, logistics, and industrial packaging environments. The system is built for handling Euro pallets (½ and 1/1) with a maximum pallet height of 2,150 mm. Technical data Manufacturer: Strapex Model: Endra HC2T Machine type: Pallet strapping and wrapping system (turntable based) Year of manufacture: 2009 Strapping type: Horizontal strapping Wrapping type: Turntable-based stretch wrapping Pallet types: Euro pallet ½ and 1/1 Max pallet height: approx. 2,150 mm Control system: Siemens S7 Equipment Integrated horizontal strapping uni ...
CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings, Additional title: Cleaning system with 5 vessels, Volume CIP tanks each: 2400 l, Operation / Control: Proleit Software, Material: vessels from stainless steel, Position: vessels standing on 3 feet each, Base construction: flatconical vessels, Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterfly valves; pip ...
Overview This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data Brewhouse capacity: 5 hl Design: 2-vessel brewhouse Heating: Steam-heated Control: Semi-automatic PLC (Siemens) with touch panel Fermentation: Open fermenters with cooling jackets Scope of Delivery Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) Water Mixing Station | — | ...
- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...
Overview The crater was used in a Belgian brewery and was stopped in Summer 2024. It was used to put 330ml bottles with mechanical closure into a wooden or plastic crate. Technical Details Manufacturer: TMG Year of manufacture: 2018 Model: IEC 61439-2 Bottle Format: 330ml Crate format: 4x3 wooden or plastic crate Capacity: 8 cycles per minute
Schenk ZHF horizontal screen filter tank with approx. 10 m² filter area, Additional title: Horizontal screen filter, Capacity approx.: 40 hl/h depending on the application, Content: 620 l, Max. pressure: 5 bar, Max. Temp.: 100 °C, Material: stainless steel, Position: free standing, Base construction: Vertical cylindrical vessel with pipe feet and horizontal drive shaft, Features: Level indicator with stand hose, removable tank lid, safety valve, base frame Electric motor and deflection for shaft drive
Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data Capacity: Max. 13,600 bph Formats: 0.50 L 1.00 L 1.50 L Neck finish: PCO 1881 Alaska Number of cavities: 8 moulds Operating hours: Approx. 35,000 h Scope of Delivery KRONES CONTIFORM S8 stretch blow moulding machine Preform hopper and feeder Chiller 6 sets of moulds Spare parts
Trap filter housing for post-filtration of beer or other liquids. Available in any size, capacity and selectivity. Manufacturer: Sartorius/Seitz/Pall/Filtrox/Eaton Please let us know your application (medium, flow rate, selectivity) and we will find a suitable solution for you., Additional title: Post-filtration, Material: stainless steel, Position: free standing, Base construction: Cylindrical housing on tubular feet with spherical caps, Features: Pressure gauge, housing with clamping screws or clamping ring
Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: Capacity: app. 2.800 crates/h Formats: 0,7 l GDB in 12er crates 0,5 l GDB in 12er crates Crate dimension: 356 x 275 x 257 mm (0,5 l GDB) 356 x 275 x 346 mm (0,7 l GDB) Electrical control Siemens S7 control Caps For the decapping of aluminium and plastic caps, 28 mm
Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h, Additional title: Bottle washing machine, Capacity: 39000 Bottles/h, Length: 12700 mm, Width: 4700 mm, Height: 3500 mm, Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW, Operation / Control: Simatic S7-300, Position: free standing, Base construction: Single-end machine, self-supporting housing on dome feet, Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station, Layer patterns: 22 bottles per basket row
Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately. Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo
- , , This PET single-use filling line is designed for bottle sizes of 0.5 L, 1.0 L, and 1.5 L and achieves a nominal output of up to 24,000 bottles per hour (for 1.0 L bottles). New bottles are destacked pallet by pallet on the new bottle unstacker and transported pneumatically to the rinser. The system consists of high-quality components from renowned manufacturers and includes: • - (KHS, 2001) • (KHS, 2001) • (Ortmann & Herbst, 1978) with downstream Velcorin dosing • - / , / (KHS, 2001) with chlorine dioxide and sterile water rinsing • -- (KHS, 2001) with Alcoa screw capper and liquid nitrogen dosing • (miho, 1992) • (KHS, 2001) • - (KHS, 2003) with hot melt glue applicator and best-before date printer This filling line is ideal for beverage manufacturers who want to fill water, soft drinks, or fruit spritzers in disposable PET bottle ...
Overview This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consu ...
Two vertical stainless steel pressure tanks with jacket cooling and various fittings., Additional title: vertical, coolable stainless steel tanks, Max. content: 8578 l, Max. pressure: 3 bar, Width: approx. 1.9 m, Height: approx. 4.3 m, Material: stainless steel, Position: free-standing, Base construction: cylindrical tank with dished bottoms and square tube feet on domes, Features: Bunging apparatus, pressure gauge, 2 shell cooling zones, standpipe for content display, manhole, sampler and side inlet in the frame, automatic valve with temperature-control, central bottom outlet with shutting flap
Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation
Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...
