Manufacturer:
(Category: 105)
For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:
Angle system for panel dividing 4300 mm x 2200 mm Year of manufacture 2000 Ex-works not dismantled (lombardia)
Circular Saw Milling Machine Machine stand can be moved with pallet truck Front-facing operation Front sliding slide lock Bevel cuts with tiltable stop on the carriage Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg Other technical
TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg
Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm
cutting diameter: 410 mmsaw band length: 5800 x 41 x 1,3 mmtable height: 750 mmcapacity 90 degrees: flat: 700 x 410 mmcapacity 45 degrees: round: 410 mmcapacity 45 degrees: flat: 500 x 410 mmcapacity 45 degrees: round: links 410 mmcapacity 45 degrees: flat: links 430 x 410 mmcapacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/minworkpiece weight: max. 250 kg/m kg: 5,5 kW: 3200 kg: 4500 x 2800 x 2000 mm- The ergonomic panel control can be networked and offers various optionsOption packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export- Automatic material feed:- In a compact design for shorter sections or with flexible insertion tongsAvailable in almost all lengths- Exact positioning of the material using servo positioning technology- Pioneering electric saw feed with ...
cutting diameter: - mmsaw band length: - mmcutting width: - mmtable - swivable: ja Gradweight of the machine ca.: 200 kgdimensions of the machine ca.: - mwith welding equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm
For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request
Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication
dimensions of saw-band: 2950x27x0,9 mm: 15-100 m/min: 285 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 2,2 kWWeight: 990 kgOverall size: 2500x2230x2050 mmAccessories / equipment:- Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade Ø: 370 mm Cutting Area at 90° round: 120 mm Square: 100 mm Rectangle: 180 x 100 mm at 45° round: 120 mm Square: 100 mm at 60° round: 110 mm Square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Space requirement: 1000 x 1000 x 1800 mm Weight: 390 kg
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible.
dimensions of saw-band: 5.330 x 41 x 1,3 mmcapacity 90 degrees: round: 460 mmcapacity 90 degrees: square: 460 mmcapacity 90 degrees: flat: 440 x 600 mmCutting area at 45 degrees left: round: 445 mm: 410 mmCutting area at 60 degrees left: round: 295 mmCutting range at 60 degrees left: square: 295 mmtable height: 890 mmcutting speed: 25 - 80 m/mintotal power requirement: 3,75 kWmachine weight ab.: 1.500 kgdimensions: 2810 x 1135 x 1860 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 300 mmsaw band length: 3660 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: round: 290 mmcapacity 45 degrees: flat: 260 x 280 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 180 x 170 mmcoolant capacity: ca. 100 lControl: SPS total power requirement: 2.4 kW ACweight: 904 kgrange L-W-H: 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on requestFeatures:- Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) Fully automatic with automatic material feed Material feed unit with recirculating ball screws- Includes PLC MITSUBISHI control unit 20 programs, each with 15 cutting lengths + number of pieces programmable- For angles from 0° to 60°, with ball-bearing rotary table Mitre cuts up to 45° possible in automatic mode Mitre cuts up to 60° possible in semi-automatic mode Ma ...
Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm
Cutting speed: 80m/min, saw blade dimensions X/Y/Z: 2760mm/27mm/0.9mm, miter range: 60°/45°, working height: 950mm, cutting range X/Y: 280mm/150mm, max. cutting diameter: 230mm. Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 350kg. Documentation available. An on site inspection is possible.
cutting diameter: 250 mmsaw band length: 2950 mmcutting width: 280 mmdimensions of saw-band: 2950 x 27 x 0,9 mmcapacity 90 degrees: flat: 280 x 200 mmcapacity 90 degrees: square: 230 mmcapacity 45 degrees: round: 190 mmcapacity 45 degrees: flat: 180 x 180 mmcapacity 45 degrees: square: 180 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: flat: 110 x 110 mmcapacity 60 degrees: square: 110 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,4 tPowerful miter band saw for cuts from 0 ° to 60 ° left-CCS (CutControlSystem) for automatic cutting. (Stepless regulation of theFeed and switch-off at the end of the cut)Description:-Manual cutting cycle-AUTOMATIC CUT: (via selector switch) with stepless settings of theLowering speed and adjustment of the cutting pressure via compensating spring-Stable, torsion-resistant and low-vibration saw frame made of cast steel-Vice wi ...
cutting diameter: 210 mmband length: 400 mmcapacity 90 degrees: square: 190 mmcapacity 90 degrees: flat: 240 x 190 mmcutting speed: 16/32 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 180 Kgdimensions: 1,2 x 0,8 x 80,8 mHydraulic hacksaw with:- Coolant device- good conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8811 Type: DG 104 Producer: ELUMATEC Created: 1990 Parameters: Control unit: E 200
Key data: 400 mm, 4800 mm, 870 mm
Metora MBS 400 - Metal Band Saw - Hydraulically controlled lowering of the saw frame - Hydraulic raising of the saw frame - Mounted on turntable Specifications - Capacity: 400 mm - Working height: 870 mm - Saw blade dimensions: 4800 x 34 x 1.1 mm - Motor power: 3.2 kW - Machine dimensions WxHxD: 2600 x 1550 x 1200 mm - Weight: approx. 1300 kg
Offer 25433 Specifications: - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed by hand - Material vise - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg
Offer 23330 Specifications: - Semi-automatic sawing machine with hydropneumatic - Saw blade feed - vise - Saw blade diameter 350 mm - 2 saw blade spindle speeds approx. 40 + 80 1/min - Cutting range at 90° around 110 mm - flat 120 x 80 mm - at 45° around 80 mm - flat 80 x 80 mm - Mitre adjustable on the left up to 45 ° - right up to 45 ° - Saw blade feed infinitely adjustable - Pneum . Material vise - E. footswitch - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 1.8 kW - Coolant device - Space requirement approx. W 1000 x H 1500 x D 1200 mm - Weight approx. 300 kg
Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting
new
cutting diameter: 440 mmsaw band length: 5200 x 34 x 1,1 mmcutting width: 610 mmcutting capacity - flat: 440 x 500 / 30° mmcutting capacity - round: 440 /30° mmcutting capacity - square: 440 x 440 / 30° mmcutting capacity - flat: 440 x 410 /45° mmcutting capacity - round: 410 /45° mmcutting capacity - square: 410 x 410 / 45° mmcutting capacity - flat: 440 x 250 /60° mmcutting capacity - round: 320 / 60° mmcutting capacity - square: 250 x 250 / 60° mmcutting capacity - flat: 440 x 610 / 90° mmcutting capacity - round: 440 / 90° mmcutting capacity - square: 440 x 440 / 90° mmspeed: 20 - 100 m/minsawing motor: 3 kWhydraulic motor: 1,1 kWcoolant pump: 0,12 kWvoltage: 400 V / 50 Hztotal power requirement: 4,3 kWweight of the machine ca.: 1,54 tdimensions of the machine ca.: 3000 x 1200 x 2000 mmInverterHydraulic viceSaw blade at an angle of 3°Digital display of the angleHydraulic ...
saw blade diameter: 350 mmdimensions of saw-blade: 350 x 32 x 2,5 mmcutting diameter: 115 mmstroke: 100 mmcapacity 90 degrees: square: 95 mmcapacity 90 degrees: flat: 180 x 95 mmcapacity 45 degrees: round: rechts & links 110 mmcapacity 45 degrees: square: rechts & links 95 mmcapacity 45 degrees: flat: rechts & links 125 x 95 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 90 x 95 mmcutting speed: 15 / 30 / 45 / 90 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 375 kgdimensions of the machine ca.: 1000 x 950 x 1800 mmFeatures:- With miter adjustment 60° left / 45° right- Coolant device- 2 speeds- Machine base- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 315 mmdimensions of saw-blade: 350 x 40 x 2,5 mmcutting diameter: 90 mmcapacity 90 degrees: flat: 150 x 90 mmcapacity 45 degrees: round: rechts & links 90 mmcapacity 45 degrees: flat: rechts & links 105 x 90 mmcapacity 60 degrees: round: 90 mmcapacity 60 degrees: flat: 75 x 70 mmcutting speed: 33 / 66 m/mintotal power requirement: 1,8 kWweight of the machine ca.: 340 kgdimensions of the machine ca.: 900 x 800 x 1700 mmFeatures:- With miter adjustment 60° left / 45° right- Coolant device- 2 speeds- Saw blade- Machine base- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
