boring mills, machining centers used for sale (536)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Working length: 1,800 mm equipped with: -2 drilling units with three drills -Insertion device for pot hole hinges -2 Bohraggregte for hinges, etc.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI IF Special machine for chairs automatically cuts and bores all type of parts of chairs and furniture components . composed by : - circular saw diam.mm.350 motor power hp 3 - boring unit ( boring head with 5/7 mandrins ) motor power Hp 3 max. working stroke of boring unit mm. 130 net weight kgs.400 Volt. 380/50

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

Multi-spindle woodworking boring machine with a worktable, adjustable guides and three pneumatic hold-down clamps mounted on an overhead beam. Equipped with a side adjustment handwheel and an electrical control box. Serial number: PZB000074. Electrical supply: 380 V, 50 Hz. Approximate weight: 750 kg. Made in Italy. Auction-ID: A1-50699-33

Multi-spindle woodworking boring machine with a worktable, adjustable guides and three pneumatic hold-down clamps mounted on an overhead beam. Equipped with a drilling head, adjustment handwheel and pneumatic hoses. Serial number: 440181. Electrical supply: 380 V, 50 Hz. Approximate weight: 770 kg. Made in Italy. Auction-ID: A1-50699-35

Auction-ID: A1-50699-49

Biesse Rover A3.30 CNC woodworking machining centre with Becker vacuum pump CNC woodworking machining centre with adjustable workpiece support beams and vacuum pods. Includes control cabinet with monitor, keyboard and mouse, separate pedestal control panel, foot controls, floor safety mats, safety fencing and machine-connected extraction hoses shown in the photographs. Visible dust accumulation and signs of wear. Included vacuum pump: - Brand: Becker - Type: PICCHIO 2200 - Year: 2007 - Serial number: 2157149 - Speed: 1,420 / 1,720 rpm - Motor power required: 1.8 / 2.5 kW - Inlet capacity: 90 / 108 m³/h - Vacuum: 130 / 130 mbar - Made in Germany Auction-ID: A1-50699-7

Maximum workpiece width: 450 mm Maximum workpiece thickness (height): 300 mm Maximum workpiece length: 13,500 mm (13.5 m) Equipment: Cylindrical cutter 350 mm x 120 mm End mill 160 mm x 40 mm - 2 pieces Circular saw blade diameter 700 mm 2 pieces Dovetail cutter mounted on the cylindrical cutter Dovetail cutter for end mill 100 mm x 30 mm end mill mounted on horizontal unit Loctc U E Heymz Uhezoaa Chain Grooving Unit Drilling units: 1 vertical, 1 horizontal Vertical ink marker at the machine outlet Auction-ID: A7-50825-1

Machine 1 – GENKO Radial Drilling Machine Manufacturer: GENKO Version: ATB 20 Machine No.: 75048 Radial/swivel arm drilling machine 8 spindle speeds Speed range: 450–4,500 rpm Speed levels: 450 / 650 / 950 / 1,250 / 1,600 / 2,100 / 3,000 / 4,500 rpm Engine speed: 1,400 rpm Horizontally movable drill head Height-adjustable working unit Drill chuck and manual spindle feed Machine substructure with drawers Machine 2 – KUPER horizontal drilling machine Manufacturer: Heinrich Kuper Horizontally arranged drilling spindle Manual workpiece/table adjustment Adjustment via handwheels and control lever Workpiece hold-down available Woodworking workbench Stationary casting machine version Auction-ID: A1-50370-8020

Type: semi-automatic single-head multi-spindle drill Use: horizontal and vertical drilling of wood and solid wood panels Number of pins: 23 Distribution: 11 lefts + 12 rights Axle spacing: 32 mm Total centre distance: 704 mm Head orientation: pneumatically adjustable from 0 to 90° Maximum drilling depth: 65 mm Maximum Tool Diameter: 40mm Maximum panel thickness: 60 mm (up to 130 mm with option) Maximum panel dimensions: 960 × 3,000 mm Engine: 1.5 kW / 2 hp Engine speed: 2,800 rpm Pneumatic pressure: 6–8 bar Suction: Ø 80 mm connection Indicative dimensions: 1,285 × 872 × 1,300 mm Indicative net weight: 271 kg Equipped with 2 pneumatic pressers, side guides/rulers and positioning stops. Auction-ID: A3-46129-35225

equipped with ruler, 1 multi drill chuck, press device and other accessories Auction-ID: A1-50090-77

Equipped with pneumatic clamping Auction-ID: A1-50090-76

Machine: WEEKE OPTIMAT BHC 550 machining center Year: 2002 Axle stroke: X 3250 mm, Y 1350 mm, Z 370 mm Table: transom with 6 infinitely adjustable supports (X) Stops: 4 rear stops + 6 programmed front stops, 2 side stops (Y) on aluminium profile Vacuum pump: 100 m³/h Control: Programmable NC Auction-ID: A1-50215-8

STEMA MS Multi-Point Drilling MachinePanel capacities: L 50–600 mm, W 50–1300 mm, thickness 16–28 mm. Robust machine for precise drilling series, quick adjustment. Auction-ID: A1-50215-21

Machine: BIESSE CNC Machining Center Table: 3060 x 1260 x 150 mm Solenoid Spindle: 12 kW, ISO30 Cone Tool changer: 10 positions Vacuum pump: 100 m³/h Consoles: 6 with 3 ATS suction cups Drilling Head: 15 Vertical + 4 Horizontal Pins X Saw: Ø125 mm Accessories: 4-position flange, bevel gearbox, flange for aggregates Equipment: chip recovery belt, Biesse WORK software, B_NEST Auction-ID: A1-50215-11

Machine Type: TEK.2004F Serial Number: 99050024 Country of Origin: Italy Power: 10 kW Voltage: 380 V Frequency: 50 Hz Amperage: 19.9 A Maximum distance between the 2 external anuba plugs: 2,700 mm Maximum height with head positioned at 0°: 200 mm Maximum thickness with head positioned at 90°: 120 mm Drilling Engine: 1 HP Screwdriving motor: 1 HP X-axis speed: 40 m/min Y-axis speed: 7 m/min Z-axis speed: 7 m/min Overall dimensions: 3,550 x 2,623 x 2,200 mm Machine weight: 1,600 kg Weight of electrical panel: 145 kg Auction-ID: A1-50215-52

Usable working area:X: 4970 mmY: 1390 mmZ: 110 mmConfiguration:16-core drill headElectro-chuck 8 kW – ISO30Frequency inverter 8 kWSaw for longitudinal incisionsHorizontal milling unit with 1 output – 2.2 kW8-position tool magazine – ISO30 carriage edgeAdapter support plate for index headsTable: Work table with bars and suction cupsPneumatic locking table2 stops per bar8 × suction cups 114 × 140 mm – H 100 (to be confirmed)8 × suction cups 125 × 75 mm – H 100 longitudinal (to be confirmed)8 × suction cups 120 × 50 mm – H 100 longitudinal (to be confirmed)8 front stops + 2 additional side stopsEquipment:Vacuum pump 250 m³/hCN on external PC (PC included)17\"PC TFT display and instructions in EnglishMastercabinet Level 1Power supply: 400 V – 50 HzCompliance: CE safety standards version LDimensions: Estimated height: approx. 2400 mm (to be confirmed) Auction-ID: A1-50215 ...

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt with vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-34

Machine: MASTERWOOD PROJECT DOORS Machining Center Year: 2001 Machining range: X 2500 mm, Y 1360 mm, Z 100 mm (passage 120 mm) Front Position: 2.2 kW horizontal unit, 8 kW ISO30 solenoid spindle, 8 pos. ISO30 Rear Position: 2.2 kW horizontal group, 14 pos. ISO30, manual tilting X/Y index head Table: belt-driven, vacuum pump 100 m³/h Belt: chip evacuation Order: Windows PC + SINCRO software Standards: CE Auction-ID: A1-50215-41

Machine: MASTERWOOD TEKNOMAT 2800 Cutting Machine Year: 2004 Machining capacity: X 2800 mm, Y 780 mm, Z 770 mm Positions: - Electrospindle milling unit HF 3.3 kW, 18,000 rpm, tilt -7° to +90° (x2) - HF 5.5 kW electrospindle milling unit, 18,000 rpm, horizontal fixed - HF 5.5 kW electrospindle milling unit, 24,000 rpm, vertical, ISO30 taper Equipment: panel support, 3 pneumatic front pressers + 2 stops, separate electrical cabinet Software: Masterwood MW313 with ANUBA programs (hinges, hinges, locks, strikers, special cutters) Axis speeds: U 60 m/min, V 20 m/min, W 20 m/min Safety: infrared barrier, CE protection Suction: Ø200 mm, flow rate 3000 m³/h Consumption: 32 A Dimensions: 5430 x 4798 mm Weight: 3600 kg + 430 kg (electric cabinet) Auction-ID: A1-50215-42

General description Sapiens 1001 TFF machining center dedicated to sawing, drilling and machining components for windows/doors. Fixed gantry structure with crossbar on rigid columns. Pneumatic devices for automatic positioning of parts. Double working area with electronically controlled grippers (X1/X2). Two spindles with Y/Z axes, rotation heads and tool magazine (16+16+1). Soundproof enclosure. User-friendly interface and optimized safety. Technical details Workpiece section: min 30x18 mm / max 230x140 mm Length: 300 to 2800 mm Strokes: X 4735 mm / Y 1235 mm / Z1,300 mm / Z2,405 mm Axis speed: X 120 m/min / Y 60 m/min / Z 45 m/min Pins: 10 kW + 12 kW, HSK F63, 12,000-18,000 rpm Saw blade: Ø max 450 mm, flange 140 mm Working height: 960 mm Pressure: 5 bar / Thrust: 720 N Weight: approx. 3600 kg Colours: RAL 7035 / RAL 5015 Dimensions: 5710 x 2600 x 2075 mm Included accessories Centra ...

Machining Strokes: X-Axis: 3,400 mm | Y-Axis: 600 mm | Z-Axis: 150 mm Tool System: 8-Position Tool Holder Holding parts: Equipped with a vacuum pump Auction-ID: A1-50215-44