subcategories
(3rd category level)
Manufacturer:
(Category: 706)
CIP tank system comprising 3 tanks connected by pipes. The smaller tank is divided into 2 sections., Additional title: 3 rectangular containers with pipe connections, Gross volume insulated containers each appr.: 1300 l, Gross volume additional container appr.: 1000 l divided into two compartments with capacities of approximately 700 and 300 litres respectively, Material: stainless steel, Position: Vertical, Features: 2 x insulated containers + 1 x additional container (divided into two sections)
Horizontal stainless steel pressure tank with a heating coil and various fittings., Additional title: horizontal pressure tank, Capacity: 15000 l, Operating pressure: 4 atm, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal, Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve
Sheet filter with square filter elements hanging vertically, arranged row. Hydraulic filter sheet press. Control of the hydraulics from the built-in electrical control panel., Additional title: Sterilisation filter with 100 sheets of 100 x 100 cm, Operating pressure: 8 bar, Number of plates: 100 pcs, Plate area: 1 m², Length: 5,5 m, Width: 1,5 m, Height: 2,3 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: Hydraulic press; control panel
CIP system comprising three rectangular tanks with piping., Additional title: Cleanig system with 3 rectangular vessels, Capacity 1 x: 1000 l, Capacity 2 x: 2000 l, Length: 3,5 m, Width: 1,5 m, Height: 1,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: rectangular containers, Features: 2 x CIP vessel 20 hl; 1 x CIP vessel 10 hl; level indicator; manway, DN65 connections
15,000 litre DEFRANCESCHI MO 150 tank press Features: Volume 15000 L Length 6500 mm Width 2200 mm Total height 3000 mm Operating overpressure 2 bar Weight 4400 kg Horizontal design
Diaphragm Tank Press Features Length 7300 mm Width 2400 mm Total height 3000 mm Power / Energy / Capacity 15 Tons Description Dimensions press: approx. LxWxH: 7300x2400x3000 mm Dimensions auger: approx. LxWxH: 4050x1500x 730 mm
Mash diver / full diver RIEGER with overflushing device and sieve cylinder with cooling jacket and control system Features Volume 5300 L Material No. V2A Total height 6600 mm Foot height 2100 mm Cylinder length 1900 mm Outer diameter 1900 mm Description Topsoil: Clapper bottom with manhole round approx. 400 mm Cylinder: Tasting tap Threaded Socket DN65 Threaded Socket DN80 Threaded socket central DN80 Control in the control cabinet on the side Large outlet with slide Underbody: 4 spherical feet, height-adjustable with washers Tray with threaded nozzle DN80 As standard, the container has: Double jacket surface for cooling or warming The possibility of fully automatic temperature control Automatic control of the mash fermentation process
Mash diver / full diver RIEGER with overflushing device and sieve cylinder with cooling jacket and control in V2A outside Features: Volume 10,000 L Material No. V2A Total height 6300 mm Cylinder length 2400 mm Foot height 1200 mm Outer diameter 2300 mm Heating/cooling jacket design Description: Topsoil: Clapper bottom with manhole round approx. 400 mm Cylinder: Tasting tap Threaded Socket DN65 Threaded Socket DN80 Threaded socket central DN80 Control in the control cabinet on the side Large outlet with slide Underbody: 4 spherical feet, height-adjustable with washers Tray with threaded nozzle DN80 As standard, the container has: Double jacket surface for cooling or warming The possibility of fully automatic temperature control Automatic control of the mash fermentation process
12,500 litre RIEGER mash tank with cooling coils Volume 12500 L Material No. V2A Total height 3700 mm Total length 3500 mm Cylinder length 2400 mm Diameter 2250 mm permissible. Operating overpressure 2 bar permissible. Operating temperature 30 bar Description Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 f ...
Overview This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 mobile CIP units Tank capacity: 100 L (alkaline + acid) Canning Line (Wild Goose GOSLING, 2021) Semi-automatic Formats: 0.33 L / 0.44 L / 0.50 L Cooling (Quantor Chilly MAX 50L) Glycol chiller for CCTs ...
Overview The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of han ...
Overview This pallet labeler was manufactured in 2007 by the German company Logopak. Manufacturer: Logopak Model: 920 PF Self-adhesive label for pallets. Label size: A5
Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right
Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available
Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Closure types: Crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Incl. dummy bottles and ...
11072026 Tunnel Pasteurizer Single Deck PETEK 15,000 Containers per Hour (2017) Available for sale is a PETEK single deck continuous tunnel pasteurizer, manufactured in Slovenia in 2017. The machine is designed for the controlled pasteurization of filled and closed beer cans and glass bottles and has a maximum nominal capacity of 15,000 containers per hour. The pasteurizer uses recirculated spray water to gradually heat, pasteurize and cool the containers as they pass through the machine. The process is automatically controlled through a Siemens PLC and HMI system, while PETEK Dynamic Active PU Control maintains accurate pasteurization levels and reduce the risk of over-pasteurization during production interruptions. The machine is built in five stainless-steel modules, making dismantling, transport and reinstallation more practical. With its wide 3,000 mm product conveyor, eight wat ...
Available for sale is a high-quality Europool single deck tunnel pasteurizer, manufactured in Italy in 2022. The machine is designed for the continuous pasteurization of beer in 330 ml glass bottles at a nominal capacity of 24,000 bottles per hour. The pasteurizer is constructed in hygienic AISI 304 stainless steel and comprises a 17-metre treatment tunnel with seven process zones. The thermal cycle includes first and second heating, pre-pasteurization, pasteurization, and three controlled cooling stages. Automatic temperature regulation and an integrated Pasteurization Unit control system ensure consistent product treatment and help prevent over-pasteurization during production interruptions. Energy recovery between selected heating and cooling zones reduces utility demand and improves overall process efficiency. The machine is equipped with recirculating water tanks, double-filtered ...
Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and ...
Overview This cold glue labeller was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels using cold glue technology and is immediately available for sale. Technical data Manufacturer: Gernep Model: Labetta 4/3/10 640 2A Year: 2008 Direction of rotation: Left-hand machine (bottle plate rotates counterclockwise) Nominal capacity: 14,000 bottles/hour Adjustable from 3,000 - 15,000 bottles/hour 2 cold glue units Label positions: Body, front, back Bottle formats: 0.5L NRW bottle 0.33L Vichy bottle 0.33L Ale bottle
Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...
Overview This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery Fill level and closure inspection system | KHS Label inspection system | Indspect
Overview This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time. Technical Details Capacity 28,800 bottles per hour 1,200 crates per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65,50mm Total height: 206,30mm Crates Formation 6x4 Length crate: 400mm Width crate: 300mm Height: 255mm Box inlet direction: transverse Electrcial connection: 400/ 230V, 50Hz, 15 A
Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data: length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A | air: 6-7 bar | 20 NL/cycle
Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats. It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...
Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)
Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible.
Overview This traypacker with shrink wrapping system was manufactured in 2001 by Germany Meypack GmbH. The system consists of a traypacker (VP 521) and a shrink wrapping machine (SWT60) and is designed for automatic tray forming, packing, and film wrapping of cans and bottles. Products are grouped via an integrated conveyor system and packed into predefined formats. Technical data Capacity: approx. 40 trays/min Formats: 24 × 0.5 L cans 15 × 0.33 L sleek cans 4 × 6 × 0.33 L bottles 6 × 4 × 0.33 L bottles 8 × 3 × 0.33 L bottles 3 × 6 × 0.5 L bottles Application: Packaging of cans and bottles Configuration: Traypacker VP 521 + shrink wrapper SWT60 with integrated conveyor system Scope of Delivery Traypacker | Meypack GmbH | VP 521 | 2001 | Tray forming system with hot melt gluing (Series 3500V) Shrink wrapping machine | Meypack GmbH | SWT60 | 2001 | Film wrapping unit with shrink ...
Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data Line type: Complete can filling line Capacity: approx. 6,000 cans/hour Main year of manufacture: 2007 Application: Beer, CSD and ca ...
Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical ...
The Meurer CM TP 22 WA is an automatic packaging machine for the secondary packaging of bottles, cans, cartons and similar products. Depending on the product design, the machine is suitable for tray packaging, shrink film packaging or combined tray/film packaging in beverage and food production lines.
