subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Condition: factory new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/vent, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with slightly smaller volume,material in contact with the product: V4A 1.4401/04 (AISI316),material feet:
Equipment: Overpressure,Manufacturer: DINO Steam Generator,Condition: Used,Volume: 110,Max. Overpressure: 3.0,Design: Hanging,Shape: Frame,Diameter inside: 400,Cylindrical height: 820,Total height: 1,150,Year of construction: 2020,Manhole / dome: in the top floor (DN 400),Type plate: Yes,Remarks: Principle drawing available Frame made of V2A,Last purpose: Autoclave for sterile masks,Material in contact with the product: V4A 1.4401/04 (AISI316),Bottom bearing: No,Current interferer: No,Bottom bearing: No, Power Interferer: No
Equipment: Overpressure,Manufacturer: eurocont,Condition: used,Volume: 1.000,Max. overpressure: 2.0,Max. permissible Operating temperature : 130,Design: Container,Stand shape: Frame,Number of feet: 4,Diameter inside: 1,000,Cylindrical height: 965,Total height: 1,850,Wall thickness underbody: 2.5,Wall thickness cylinder: 2,Wall thickness upper floor: 2,Technical documents: Drawing,Type plate: Yes,Equipment: Disc,Outlet: DN50 DIN 11851 ,Remarks: Hand hole DN 100 in the top floor (occasionally the union nut is missing) Partly small dents possible,Last use: Food,Material
Equipment: Insulation, Overpressure,Manufacturer: Thyssen Umformtechnik (UCON),Condition: used,Volume: 1,000,Max. overpressure: 2.00,Design: Container,Stand shape: Frame,Insulation: available,Insulation material: PU foam,Material insulating jacket: galvanized steel,Diameter inside: 1,100,Total width: 1,200,Total length: 1,200,Technical documents: TÜV papers,Manhole / dome: in the topsoil (DN 400),Type plate: No,Outlet: 76,Note: slight adhesions, pressure points on the Insulating sheath, traces of use, remarks: partly slight differences in the design Total height 1800 - 1960 mm
Equipment: overpressure, vacuum,Manufacturer: Wilhelm Schmidt,Condition: used,Volume: 3,Vacuum: 1.0,Max. overpressure: 5.0,Design: upright,Standing shape: Stand frame,Diameter inside: 140,Total height: 260,Technical documents: Drawing,Type plate: No,Outlet: not available,Remarks: Opening in the top floor Diameter of pipe inside approx. 28 mm Pressure-resistant closures for this opening are not available (could be purchased by you from the manufacturer) Since the containers were supplied by the previous operator were operated without pressure, pressureless caps were used there (see photos)
Equipment: Insulation, Overpressure,Condition: used,Volume: 3.600,Max. overpressure: 2.6,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Insulation: available,Insulating sheath: hermetically welded,Insulation material: PU foam,Material insulating sheath: stainless steel,Insulation thickness: 50,Diameter inside: 1,400,Diameter outside: 1,500,Cylindrical height: 2,000,Total height: 3,400,Wall thickness floors: 4,Wall thickness cylinder: 3,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Spray head,
Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 2.470,Max. overpressure: 3.0,Design: standing,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 1.300,Cylindrical height: 1.500,Total height: 2.450,Wall thickness shelves: 3.8,Wall thickness cylinder: 4.5,Year of construction: 2015,Technical documents: Drawing, acceptance certificate, CE marking and declaration of conformity,Manhole / dome: in cylinder (approx. 340 x 440 mm),Type plate: Yes,Equipment: disc, Spray head, outlet: DN32 DIN 11851, last purpose: brewery, material in contact with the product: V2A 1.4301
Equipment: Overpressure,Manufacturer: Noble Tank,Condition: used,Volume: 3,000,Max. overpressure: 2.0,Design: upright,Stand shape: feet,Number of feet: 3,Diameter inside: 1,390,Cylindrical height: 1,500,Total height: 2,500,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: disc,Outlet: DN50 DIN 11851 ,Note: slight adhesions,Remarks: Manhole Dimensions: approx. 300 x 395 mm (the manhole cover is missing),last use: Brewery,Surface exterior: marbled,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Current interferer:
Equipment: Overpressure,Manufacturer: Coelho,Condition: used,Volume: 3,660,Max. overpressure: 3,00,Max. permissible Operating temperature : 85,Bottom floor: Cone bottom,Design: upright,Stand shape: Feet,Number of feet: 3,Diameter inside: 1,600,Cylindrical height: 1,500,Total height: 3,850,Wall thickness underbody: 5.1,Wall thickness cylinder: 6.1,Wall thickness upper floor: 5.6,Manhole / dome: Hand hole,Type plate: Yes,Equipment: Crane eyelets,Outlet : 60,Note: slight adhesions,Remarks: Cone height approx. 800 mm 1 hand hole diameter 350 mm in the top floor 1 small bump in one of the feet (see photos), last
Equipment: Overpressure,Manufacturer: Martin Rosa KG,Condition: used,Volume: 6,200,Max. overpressure: 8.0,Design: lying,Base: feet,Number of feet: 4,Diameter inside: 1,600,Cylindrical length: 2470,Overall height: 1,900,Total length: 3,400,Wall thickness shelves: 4,Wall thickness cylinders: 4,Type plate: Yes,Outlet: DN65 DIN 11851 ,Note: slight adhesions,Remarks: 1 manhole approx. 320 x 420 mm in the front floor (one container is missing the manhole cover) with 1 tank the nameplate is missing Front floor outside marbled foot ends partially shortened, total height may vary slightly, last
Equipment: Insulation, Overpressure,Manufacturer: ABAB General Tank and Apparatus Construction,Condition: Used,Volume: 10,000,Max. Overpressure: 5.00,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating sheath: hermetically welded,Material insulating sheath: Stainless steel,Diameter inside: 1,800,Diameter outside: 2,000,Cylindrical height: 4,000,Total height: 5,200,Wall thickness floors: 7,Wall thickness cylinder: 5,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Level indicator
A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.
Warehouse Service for Used Machines Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics ef ...
The Mariani INOX handle applicator was developed for the automatic application of carrying handles to beverage multipacks or bottle containers. The machine works inline within the production line, ensuring precise and reliable handle positioning at high production speeds. Manufacturer: Mariani Model INOX Handle Applicator Year 2005 Condition Used Stock number 103823 Type PLC 6ES7 214 SIEMENS Voltage: 400V Frequency 50 Hz
- Output: 10000 bph - Year : 2007 - With ozone generator - Manufacturer : PROMEC - Model: Rotonech - M1110-36 - 2 - Type: Dual Channel Sterilizer Rinser - With recirculation tank, pump and filter - Position spray heads: 36 pieces - With closed hood and ozone air extraction - Strap height : 1250 mm (incl. additional foot pads) - Bottle formats: from 55mm to 99.8mm (total 20 different bottles) - Running direction: Left – Right Dimensions: - Width: 1900 mm - Depth: 2200 mm - Height: 2250 mm - Machine available from the end of July 2026 - Machine in good condition
Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...
Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of m ...
Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) bottles.The system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data Direction of operation: RM Capacity: approx. 2,500 bottles per hour Speed range: approx. 800 – 3,00 ...
Overview The Kettner crate washer, type WAH 26, was manufactured in 1992. With an output of up to 2,600 crates per hour, it is suitable for use in existing filling lines for cleaning beverage crates. Technical details Manufacturer: Kettner - Sotec GmbH Model: WAH 26 Year of manufacture: 1992 Capacity: 2,600 crates/h
Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow. Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 20 ...
Used KRONES filling glass line for beer 34000 BPHTechnical Specifications & Performance DataThis complete glass bottling line for beer is a high-speed, second hand solution engineered by Krones for industrial packaging and beverage production. Designed for crown cap closures and glass bottle handling, the line delivers excellent throughput and quality control across multiple formats. It is an ideal used bottling line for breweries looking to increase capacity with proven equipment.Production speed: up to 34,100 bphFormat performance: 34,100 bph for 0.33L, 0.355L, 0.45L; 30,000 bph for 0.5L, 0.75LCompatible formats: 0.33L, 0.355L, 0.45L, 0.5L, 0.75L bottlesContainers: Glass bottlesClosure type: Crown capYear of manufacture: 2017Recorded operating hours: 25,655Key equipment: LAVATEC D4.CCD.EQ318 bottle washer; MODULFILL HES 2.880-104-87 filling monoblock; LINAFLEX LB24.7-523-41 tunnel past ...
Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/cap ...
Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the pla ...
Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per hour. ...
Used Mesal mixer 10000lt - year 2011Technical Specifications & Performance DataThis Premix Mixer is engineered for beverage production environments requiring precise syrup mixing, water blending, and controlled carbonation. Manufactured by MESAL in 2011, the unit combines automated process control with reliable construction for consistent results in industrial packaging and used bottling line applications. It supports cold operation for efficient CO2 absorption and delivers stable carbonation suitable for carbonated soft drink preparation and flavored beverages.Manufacturer: MESALModel: WPM 06 (also referenced as MIX-6D-1 in documentation)Year: 2011Capacity: 10000 LCarbonation level: 4 to 4.5 kg/cm²Working temperature: -2 to 12 °COperating type: AutomaticControl system: Omron PLCElectrical supply: 400 V, 60 HzAdvanced Automation & Control SystemsThe mixer is equipped with an Omron PLC ...
Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logil ...
Used Sidel bottling line for still - sparking water - 14400 BPHTechnical Specifications & Performance DataThis used bottling line is configured for PET bottle handling and optimized for water production, covering both carbonated and still products. The system combines isobaric filling technology with robust end-of-line packaging, offering reliable performance for medium-speed beverage production.Production speed (maximum): 14,400 bph with 0.5LAdditional speeds: 9,000 bph with 1.5L still water; 7,000 bph with 1.5L carbonated waterBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottlesContainers: Designed for PET bottles with air conveyors for empty bottle transportFiller technology: Isobaric; neck 26 mmLabeling: KHS Innoket 21 N (2002) and SACMI OPERA (2011)Shrink wrapper: SMI LSK45 T (2001)Pallet wrapper: TOSA 125 (1995)Chiller: M.T.A. TAEevo TECH 121 (2025)Ancillary equipment: SIAD Mac ...
Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized ...
