subcategories
(3rd category level)
Manufacturer:
(Category: 706)
Equipment: Agitator,Condition: used,Volume: 300,Design: upright,Stand shape: Stand frame,Diameter inside: 950,Cylindrical height: 440,Total height: 860,Overall width: 1,120,Manhole / dome: in the topstock,Type plate: No,Equipment: Ball valve,Outlet: 50,Note: slight adhesions,Remarks: Manhole Diameter: approx. 395 mm,Last use: Paints & Varnishes,Material in contact with the product: V2A 1.4301 (AISI304),Power: 0.55,Speed: 690,Agitator: Inclined blade stirrer, Voltage volts: 230/400,explosion-proof: motor is explosion-proof (compliance with current ATEX directives)
Equipment: Insulation, Agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 1,000,Max. permissible Operating temperature : 90,Design: upright,Standing shape: Feet height adjustable,Number of feet: 3,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 990,Diameter outside: 1,120,Cylindrical height: 1,430,Total height: 3,100,Manhole / dome: in the top floor,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Outlet : 65,Remarks: Diameter manhole approx. 420 mm Insulation around the cylinder (small bumps in the
Equipment: agitator,Condition: used,Volume: 2,300,Design: hanging,Shape: Frame,Diameter inside: 1,260,Cylindrical height: 1,870,Total height: 4,200,Manhole / dome: in the topsoil (DN 500),Type plate: No,Equipment: spray head, crane eyelets,Outlet : 48,Note: slight adhesions,Remarks: 3-legged frame made of V2A outlet fitting incomplete 3 load cells (without guarantee of functionality) are included in the scope of delivery,last use: food,material Product contacting: V2A 1.4301 (AISI304),Manufacturer agitator: Ystral,Power: 22,Speed: 1.470,Agitator:
Equipment: Insulation, Agitator,Manufacturer: Ahlborn,Condition: used,Volume: 110,000,Lower floor: Flat floor with slope,Design: upright,Standing form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: Stainless steel,Diameter inside: 3,484,Cylindrical height: 13,330,Total height: 14,550,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Ladder included,last purpose: Foodstuff,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:
Equipment: Insulation,Condition: used,Volume: 100,000,Design: upright,Standing form: Standing frame,Insulation: available,Material insulating jacket: Painted steel,Insulation thickness: 100,Diameter outside: 3,800,Total height: 11,000,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Spray head,Last use: Food / Dairy,Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Agitator arrangement: Laterally on the cylinder,Bottom bearing: No, Power Interferer: No
Equipment: Insulation, agitator,Manufacturer: Thrun Maschinen- und Behälterbau,Condition: used,Volume: 113,000,Design: upright,Stand form: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Insulation material: PU foam,Material insulation jacket: stainless steel,Diameter inside: 3,750,Cylindrical height: 11,700,Total height: 13,000,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, spray head, crane eyelets, outlet: available,outlet : 80,last use: foodstuffs,agitator: propeller,bottom bearing: No,power interferer:
Equipment: Agitator,Condition: used,Volume: 180,Design: upright,Base: Feet,Number of feet: 4,Diameter inside: 640,Total height: 1,950,Manhole / dome: Hand hole,Type plate: No,Outlet: DN40 DIN 11851 ,Note: slight adhesions,Remarks: Diameter of hand hole 200 mm,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: stainless steel,Power: 1,Speed: 224,Agitator: propeller,Voltage volt: 220/380,Bottom bearing: No,Current interferer: No, Agitator arrangement: eccentric in the topsoil,Bottom bearing: No,Current interferer: No
Equipment: Insulation,Manufacturer: Tetra Pak Processing,Condition: used,Other: 8 minutes Hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Weight approx. 7 t ,Remarks: Wall thickness of the pipes 2mm (1.7mm in the bend area) 6 height-adjustable feet Smaller dents in the insulation jacket Insulation jacket is no longer present in 2 parts (see photos),last use: dairy,Nameplate: No,Insulation: available,material insulating jacket: stainless steel,material pipes: AISI304 (V2A) 1.4301,total height: 3.200,total width: 1.550,total length: 6.530
Manufacturer: APV Rosista GmbH,Condition: used,Other: - Manufacturer: APV- Type: DELTA SR52- permissible Operating overpressure of the frame: 13 bar,last use: Winery,Nameplate: Yes,Total height: 2,050,Total width: 700,Total length: 1,750
Equipment: heatable/coolable, overpressure,condition: brand new,volume: 1,175,max. permissible Operating temperature : 50,Max. overpressure: 2.50,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 7.0,Max. permissible Operating overpressure double jacket / pipe chamber / bar: 3.0,Max. permissible Operating temperature : 50,Temperature control cylinder: Thermoplate,Temperature control underbody: Thermoplate,Diameter inside: 1.000,Cylindrical height: 1.250,Total height: 2.050,Technical documentation: Drawing,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Spray head,
Equipment: Heatable/coolable,Condition: used,Volume: 1.050,Design: upright,Stand shape: feet,Number of feet: 3,Heating/cooling (filter bar): available,Max. permissible Operating overpressure double jacket / tube chamber / bar: 6.0,Temperature control cylinder: Thermoplate,Diameter inside: 1,000,Cylindrical height: 1,238,Total height: 1,810,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: No,Equipment: Level indicator (without guarantee), Crane eyelets,Outlet: DN50 DIN 11851 ,Remarks: Manhole diameter: approx. 420 x 320 mm,Surface outside: marbled,Material in contact with the product: V2A 1.4301
Condition: used,Volume: 900,Design: oval,Stand shape: feet height adjustable,Number of feet: 4,Cylindrical height: 1,290,Total height: 1,950,Type plate: No,Equipment: disc tap, spray head,outlet : 35,Note: slight adhesions,Remarks: Height-adjustable screws of the feet incomplete (for installation this would have to be compensated accordingly on site) there may not be a spray head for every tank,last use: beer tank,material In contact with the product: V4A 1.4401/04 (AISI316),Material feet: stainless steel,Bottom bearing: No,Current interferer: No,Bottom bearing:
Equipment: Agitator,Condition: used,Volume: 22,000,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 2,490,Cylindrical height: 4,480,Total height: 6,150,Manhole / dome: in the cylinder, in the top floor,Type plate: No,Equipment: Ventilation/venting,Outlet : 60,Note: Leaking flexed,Remarks: Container with bumps 1 foot is pressed into the underbody (see photos) - before the container is re-erected, this would have to be repaired accordingly, last use: fruit juice industry, material in contact with the product: V2A 1.4301
Equipment: Agitator, overpressure,Manufacturer: H&K Behälter- und Edelstahltechnik,Condition: used,Volume: 1.300,Max. overpressure: 0.1,Design: standing,Stand shape: feet height adjustable,Number of feet: 3,Diameter inside: 1,140,Cylindrical height: 1,000,Total height: 2,950,Wall thickness shelves: 4,Wall thickness cylinder: 2.9,Year of construction: 2005,Manhole / dome: in the upper floor,Type plate: Yes,Equipment: Spray head,Outlet : 50,Remarks: Diameter manhole approx. 420 mm, last purpose: Pharmaceuticals,Material in contact with the product: V4A 1.4401/04 (AISI316),Material feet: Stainless steel,Manufacturer agitator:
Equipment: Agitator,Condition: used,Volume: 5.000,Design: upright,Base: feet,Number of feet: 3,Diameter inside: 1.890,Cylindrical height: 1.690,Total height: 2.450,Wall thickness underbody: 2.5,Wall thickness cylinder: 1.9,Wall thickness upper floor: 2.0,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: DN50 DIN 11851 ,Remarks: Diameter manhole top bottom approx. 425 mm, Manhole cylinder approx. 310 x 425 mm small dents in the cylinder, Last use: Spirits,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Power:
Equipment: Heatable/coolable,Condition: used,Volume: 72,500,Design: horizontal,Stand shape: feet,Number of feet: 12,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 2,800,Cylindrical length: 12000,Total length: 13,100,Type plate: No,Equipment: Spray head,Remarks: 6 reinforcement rings Fe with 2 feet each (Attention: note tank diameter lower than tank feet when setting up) Manhole in the front floor,last Intended use: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material temperature control system: V2A 1.4301
Condition: brand new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: standing,Stand shape: flat bottom,Number of feet: 4,Diameter inside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with a slightly smaller volume, material in contact with the product: V2A 1.4301
Manufacturer: Schwarz Apparate- und Behälterbau,Condition: used,Volume: 4,000,Lower bottom: flat bottom,Top bottom: screwed lid with hinged segment,Design: upright,Diameter inside: 1,590,Cylindrical height: 2,000,Total height: 2,200,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 1.5,Type plate: Yes,Outlet: available,Outlet : 48,Note: slight adhesions,Remarks: Tanks slightly out of round Spout is deeper than tank bottom (note when setting up) Sheet metal cut-outs in the lid Type plate only available for 2 tanks 1 tank with ball valve (see
