subcategories
(3rd category level)
Manufacturer:
(Category: 110)
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts
faceplate diameter:500 mmweight of the machine ca.:0,1 t4-jaw faceplate for studs and locknut
Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale
length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U
feed pressure:13 bartotal power requirement:3 kWweight of the machine ca.:0,15 tdimensions of the machine ca.:1,0 x 0,8 x 1,2 mHigh pressure air cooling device
length:500 mmwidth:320 mmheight:800 mmweight of the machine ca.:0,25 tAngular clamping device made by cast ironwith 5 T-slotss 22 mm
tool taper:40 weight:0,1 tAppr. 60 ISO 40 NC arbors with various clamping shaftsPackage selling or individual possible, min. 5 pieces
weight:400 kg8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mmwas used for clamping rings on a Vertical Turning Machine
Article: profile turning trip dogManufacturer: SchütteMany different sizes for Schütte profile turning attachment 68AEPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Unused AC motor made bei E.M.G. Italy with 260 Watt power and adapted Cucchi pump
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: three-phase current motorManufacturer: Antriebstechnik BauknechtType: RFV 22/4-75Pe.g. to use as spindle motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Technical description :CLAMPING/ MOUNTING TABLE- Length 2600mm- Width 1500mm- Height 250mm
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Tool drive motor for e.g. Schütte S32PC, not usedVariable tool drive for e.g. pickoff in positions A, B, C, DPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
pickoff with shaft for Schutte multi spindle automatic lathe SF67, usedpickoff C26GFpickoff shaft C26GF9S1gear WG-67SPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: draw barManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: quadrant leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: feed leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push rodManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
polygon turning unit for Schutte AG20, used1 polygon turning unit type Saco SC 15.22.001-Nr.31 cardan shaft type Saco SC 15.52.188.001 gear box SC 15.22.001-Nr. 3Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
