subcategories
(3rd category level)
Manufacturer:
(Category: 110)
floor-plate length:6000 mmfloor-plate width:2000 mmfloor-plate height:460 mmweight of the machine ca.:12,5 tdimensions of the machine ca.:6 x 2 x 0,46 m
length:500 mmwidth:320 mmheight:800 mmweight of the machine ca.:0,25 tAngular clamping device made by cast ironwith 5 T-slotss 22 mm
weight:400 kg8 clamping jaws each ca. 600 x 210 x 170 mm , hole dia. 22 mm, center distance ca. 170 mmwas used for clamping rings on a Vertical Turning Machine
TECHNICAL SPECIFICATION:. - Fixed table length:12000 mm - . width:3000 mm - . height:350 mm - number of T-slots:10 - distance between T-slots:300 mmTechnical description :FLOOR PLATES consisting of 4 (four pieces) at segments of 6000mm length and 1500mm width
Article: profile turning trip dogManufacturer: SchütteMany different sizes for Schütte profile turning attachment 68AEPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: three-phase current motorManufacturer: Antriebstechnik BauknechtType: RFV 22/4-75Pe.g. to use as spindle motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Tool drive motor for e.g. Schütte S32PC, not usedVariable tool drive for e.g. pickoff in positions A, B, C, DPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
pickoff with shaft for Schutte multi spindle automatic lathe SF67, usedpickoff C26GFpickoff shaft C26GF9S1gear WG-67SPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: draw barManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: quadrant leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: feed leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push rodManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
Article: push leverManufacturer: SchütteFor multi spindle automatic lathes of different sizesPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
polygon turning unit for Schutte AG20, used1 polygon turning unit type Saco SC 15.22.001-Nr.31 cardan shaft type Saco SC 15.52.188.001 gear box SC 15.22.001-Nr. 3Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com
drum diameter:400 mmrevolutions per minute:980 U/mintotal power requirement:2,2 kWLanner batch wringer ME41-2for deoiling of metal chips-turnkey delivery and easiest handling-very long service life, operation free of vibrations-compact and easy to maintain, i.e. low maintenance costs and quick return of investment-standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control-including control cabinet laterally placed, i.e. not in swivel range of crane-drum volume 35 Liter/max. 50 kg-rotation speed max. 980 min-1-power 2,2 kWPainting:RAL 5012 light blue (batch wringer, crane support)RAL 1003 signal yellow (traverse)RAL 7035 light grey (control cabinet)In each case silk gloss. Changes after consultation.Also included in the scope of delivery:-Crane support with swivel arm: mounted on the side of the centrifuge ...
centre height: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Article: bar loading magazineManufacturer: FMBType: Minimag 18Yob: 2007Bar feeder was used on a cam-controlled long turning lathe Strohm M125Two identical models are available for salePlease, contact us for getting more information and pictures.
Article: bar loading magazineManufacturer: FMBType: Minimag 18Yob: 2007Bar feeder was used on a cam-controlled long turning lathe Strohm M125Two identical models are available for salePlease, contact us for getting more information and pictures.
feed pressure:8 bar:9 m³/minNumber of working hours:18671 hvoltage:380 - 415 Vtotal power requirement:58,5 kWweight of the machine ca.:1300 kgdimensions of the machine ca.:2000 x 1100 x 1700 mm
feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20
diameter:400 mmtotal power requirement:110 V, 125 Wweight of the machine ca.:72 kg
rotary table dia.:400 mmweight of the machine ca.:130 kgdimensions of the machine ca.:500 x 600 x 160 mm
weight of the machine ca.:45 kgdimensions of the machine ca.:600 x 330 x 270 m
table length:630 mmtable width:200 mmno. of flutes:3 weight of the machine ca.:55 kg
weight of the machine ca.:50 kgdimensions of the machine ca.:660 x 460 x 280 mmno. of flutes:3 groove width:14/24 mmsurface area:570 x 460 mm
table diameter:500 mmclamping slots:6 x 14 mmweight of the machine ca.:190 kgdimensions of the machine ca.:500 x 650 x 300 mm
