subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Total of 3 pieces, Unused, Item No.: 12651380520, Type: 52-12-IK-Z4, further details see photos
Total of 4 unused face mills with corresponding screws for indexable inserts, Item No.: 19763050, Diameter: 50mm, further details see photos
Total of 3 pieces, Unused, Item No.: 19240400, Mount: HSK63T, further details see photos
Total of 3 pieces, Unused, Item No.: 19240400, Mount: HSK63T, further details see photos
Total of 3 pieces, Unused, Item No.: 19 323 490, Mount: HSK63T, further details see photos
Total of 3 pieces, Unused, Item No.: 19 323 490, Mount: HSK63T, further details see photos
Total 15 pieces, unused, Item No: 13 05 0280030, further details see photos
Total 15 pieces, unused, Item No: 13 05 0280030, further details see photos
Total 5 pieces, unused, Item No. 12151050060, further details see photos
Lot of Clamping Holders; Total: 6 pieces; various types; further details see photos
We hereby offer you a 3-coordinate measuring machine from WENZEL as follows: Basic machine data Make: WENZEL Type: LH 1010 Condition: very good x-axis: 1000 mm // y-axis: 1600 mm // z-axis: 1000 mm Technical data: • Base plate made of natural hard stone approx. 1600 mm x 2700 mm • Measurement uncertainty according to DIN EN ISO 10360-2 for touch probes TP200 / SP25M • Temperature range: 20° C ± 2 K, 1.0 K/h, 1.0 K/m • Special accuracy: MPEe (μm) = 2.5 + L/400 (L in mm) MPEp (μm) = 2.7 MPEthp (mm) = 3.0 • Max. speed 3D: 500 mm/s • Max. acceleration 3D: 1000 mm/s² • Incl. active damping device • CNC evaluation system, consisting of: CNC control for 3 axes (230 V) including computer cart, HT400 control panel, necessary cabling • Metrosoft CM-Wenzel CNC (geometry software) Consisting of CM-BAG, CM-PROG, CM-ISO, CM-TOTA, CM-EXFE, CM-STA ...
table length: 605 mmtable width: 250 mmweight: ca. 40.0 kg Current list price: approx. 3.000 euros Special price available upon request Features- Sturdy / solid cross table- From an ALZMETALL column drill press- Machined clamping surface: 605 x 250 mm- Maximum travel: 600 mm- Adjustment range: 0.05 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 240.000 N0: 270x150x140 mmweight: 16 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 240.000 N0: 220x150x95 mmweight: 11,5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 200.000 N0: 275x120x75 0weight: 12 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 120.000 N0: 210x110x100 mmweight: 6,5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 30.000 N0: 205x100x55 mmweight: 4 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 200.000 N0: 250x130x115 mmweight: 10 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 120.000 N0: 178x120x75 mmweight: 5,5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 90.000 N0: 190x100x65 0weight: 3,5 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 90.000 N0: 175x105x55 mmweight: 4 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: ca. 90.000 N0: 190x100x65 mmweight: 3,7 kgthread: M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 90.000 N0: 168x105x80 mmweight: 3,3 kgthread: M16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. load: 240.000 N0: 270x150x140 mmweight: 16 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
dimensions of the machine ca.: 6,2 x 3,4 x 2,6 mweight of the machine ca.: 9,6 tpower requirement: 22 kWControl: FAGOR 8055i table-size: 1800x500 mmlong. travel of table: 1660 mmtable weight: 1700 Kgcross travel: 600 mmnumber of spindle speeds: 1500 U/min/rpmspindle drive: 12 kW-Usable grinding area 1,500 x 680 mm-Max. distance table – grinding wheel center 625 mm-Infinitely variable table speed 2–28 m/min-Cross-feed speed 0.02 – 5 m/min-Vertical feed speed 0.02 – 2 m/min-Infinitely variable table speed control Included-Max. grinding width (with 80 mm wheel) 680 mm-Smallest programmable CNC increment 0.001 mm-Grinding wheel dimensions Ø 400 x 80 x 127 mm-FAGOR servo motors and drives for 3 axes (X, Y, Z) Included-Electromagnetic chuck (high density) Included-Electromagnetic chuck dimensions 1,500 x 600 mm-Coolant filtration system with paper f ...
A: Reamers : 5, 6, 7, 8, 2x 10, 2x12, 12,5, 2x 14, 15, 2x 16, 17, 18, 19, 2x20, 21, 22, 23, 24, 25, 28, 30, 33, - Euro 180,- B : Reamers : Diameter : 3, 5, 6, 7, 9, 10, 11 , 12, 14, 16, 18, 3x 20, 21, 22, 24, 25, 28, 35, 37, . +5 pcs , approx. 14 KG - Euro 150,- D: Adjustable reamers : 2x 11, 12, 2x 13, 2x 15, 2x18, 19, 2x20, 21, 22, 24, 25, 27, 28, 30, 33, 37, 40, 45, . 24 pcs. - Euro 200,- E : Slip-on reamers : 2 mandrels MK4 , φ 30 – 60 mm , approx. 25 attachments - Euro 240,-
1 pc each : φ 6H7, 16H7, 17H7, 18H7, 19H7, 20H7, 21H7, 22H7, 23H7, 24H7, 25H7, 27H7, 38H7, 65H7, 72H7,
