saws used for sale (1,284)

Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH

Lg.Nr. 24029 Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Material replenishment machine - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

cutting diameter: 250 mmsaw band length: 3100 x 27 x 0,9 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280 x 190 mmband speed: 37 / 74 m/minsawing motor: 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,3 mMiter band saw- Semi-automatic- Double miter- Material detection during loweringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 210 mmcapacity 90 degrees: flat: 270 x 200 mmcapacity 90 degrees: square: 200 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: flat: 180 x 190 mmcapacity 45 degrees: square: 180 mmvice: 200 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2750 x 27 x 0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,95 x 1,7 x 1,9 mmBandsaw machine with:- Miter 45 ° right- Miter on turntable adjustable- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lenght 6 m E355 positioner controller Saw diameter 420 mm

Key data: 303 mm, 3830 mm

Sawing capacity at 90 degrees: Round: Ø303 mm Square WxH: 360 x 305 mm Sawing capacity at 45 degrees: Round: Ø265 mm Square WxH: 265 x 300 mm Sawing capacity at 30 degrees: Round: Ø175 mm Square WxH: 175 x 300 mm Sawing speed: 20 - 90 m/min. Saw blade: 3830 x 25 x 0.9 mm 3850 x 27 x 0.9 mm Working height: 700 mm Equipped with: - Mitre saws -Semiautomatic - Roller conveyors approx. 8 meters -Operating instructions Country of origin: Germany Motor power: 1.1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Key data: 425 mm, 145 mm, 120 mm

Saw blade: ø 425 mm Saw Capacity: 145mm Round 120 mm square Saw Angle: 45º Left/Right Sawing speed: 18 / 36 rpm Auto. Roller conveyor start: MPS, type 4010, 8 meter range Equipped with: - Semi automatic - Hydraulic clamping - Variable saw feed Country of origin: Germany Motor power: 5.5 kW Machine weight: 1000 kg Machine LxWxH: 120 x 90 x 180 cm

Key data: 500 mm

Double mitre saw Pertici Type: UNIVER 502D2 Year of Make: 1998 Cutting of aluminium and PVC profiles Cutting length 360 – 6000 mm Cutting width max. 150 mm Cutting height max. 350 mm Saw blade diameter D 500 mm Saw blade revolutions 2800 rpm. Saw blade bore d 30 mm Saw blades swivel from 90° to 45° to 0° Motor powers: 2.2 + 2.2 kW Connected load 4.5 kW, 380 volts 50Hz Automatic feed and cutting process Saw automatically moves to the entered dimension and cuts automatically Control panel with digital display for cutting dimension was used for cutting aluminum square tubes in the Windows and conservatory construction Good working condition, exact cut Dimensions 7200 mm x 1200 mm x H 1700 mm Weight: 1980 kg

Metal Circular Saw Blades Quality HSS-DMO 5 250x2x32mm Pitch 6 Teeth 160 Tooth shape C

capacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 330 mm: 400 x 310 saw band length: 3820 x 34 x 1,1 mmband speed: 22 - 88 m/mintable height: 930 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,22 x 1,2 x 2,1 mDouble miter band saw, hydraulic semi-automatic• miter left 60° + right 45°• Industrial hydraulics, powerful 18 bar• Best access to the material• Ammeter to check a.- Optimization of cutting force- Tape life- cutting course• Vise closes/opens hydraulically• Material turntable with ball bearings b.• Adjustable quick-release• Material height sensor Semi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the start of the material or the same for series cutting cut4. Saw band off5. Raise the frame to just above the material6. Open the viseThe data for this ad was created with ModulMWS ...

cutting speed: 60-100 m/minengine output: 7,5 kWweight: 8800 kgHorizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine,Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mmsaw band length: 2480 mmcutting width: max. 245 x 150 mmvoltage: 230 Vpower capacity: 1,5 kWdimensions of saw-band: 2480 x 27 x 0,9 mmmitter cutting: 0 - 60 °cutting speed: 20 - 90 m/minweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,4 x 0,69 x 1,7 m- stepless speed- stepless feed- miter cut- Bi-metal saw band- Material stop- Machine base- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 mmcutting diameter: bis 90 mmcutting range flat: 120 x 75 mmturning speeds: 40/80 U/minmiter cut: 45°/90°/-45° °weight of the machine ca.: ca. 150 kgManual saw blade feedAccessories:Coolant deviceUnderframe with 2 drawersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 315 mmdimensions of saw-band: 3460 x 1,1 x 34 mmcutting speed: 35 / 70 m/mincutting width: 400 x 250 mm: 250 / 280 mmImpact energy: 220 / 280 mm: 180 mm: 140 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions: 2,1 x 1,0 x 1,5 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 100 x 195 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 100 x 135 mmsaw blade turning speeds: 2800 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 250 kgdimensions: 0,7 x 0,7 x 1,4 mATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 x 27 x 0,9 mmtable height: ca. 800 mmband speed: 36/72 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mMEP sawing machine:Saw band bow, vice unit and base made of durable cast ironPrecision grade marking on the cast iron structureElectrical system (with fully identifiable electrical wiring andLow voltage system 24 V)Switch handle IP 55 for manual cycles (if available)Rotating scraper brush for the saw bandClamping unit with vice for quick approachAccurate stops with adjustment for miter cuts at 0°, 45°, 60° leftBi-metal saw band 2950 x 27 x 0.9 mmKeys, instructions for use and instructions for ordering spare parts in theUser languageSHARK 281 with manual operation and SHARK 281 CCS with manual operation and cuttingwith automatic head feed by its own weight.CCS (Cut Control System) w ...

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 870 mmband speed: 18 - 110 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,63 tdimensions of the machine ca.: 1,8 x 1,85 x 1,85 mMiter band saw, fully automatic GBS 250 Super VA-I MPS• Miter left. 45° automatic operation• Miter left. 60° semi-automatic operation(cuts without programming)• Shockproof and ergonomic control panelwith oil-proof EPDM cover a.• Material height sensor c.(Automatic cut start detection)• Frame and gearbox made from one piece,very quiet cutting and very low vibration• Chip tray can be removed (disinfection)• Easy access to the saw, material and feed unit• Foldable safety cover• Fine feed adjustment• Semi-automatic. Cut!Saw automatically with microprocessor controlAdjustable for 2 program l ...

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mSPECIAL PRICE!Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic coolingShare of freight costs 120 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 mmcapacity 45 degrees: round: 680 mmcapacity 45 degrees: square: 600 mmcapacity 45 degrees: flat: 870x600 mmcapacity 60 degrees: round: 580/550 mmcapacity 60 degrees: square: 530/450 mmcapacity 60 degrees: flat: 550x450 mmsaw band length: 8140 x 54 x 1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,3 tdimensions of the machine ca.: 5,75 x 4,2 x 2,75 m2-column double miter band saw for quick cuttingwith pusher system P15. Option P30Hydraulic saw frame lowering• NC controlled• Automatic angular positioning from + 60° to – 60°High quality automatic miter adjustmentSpecial development for cutting profiles and beams.The highest positioning accuracy is achieved via the new B&S positioning system”.reached. An intelligent NC control ensures smoot ...

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 capacity 45 degrees: round: 550 mmcapacity 45 degrees: square: 550 mmcapacity 45 degrees: flat: 550x600 mmcapacity 60 degrees: round: 370 mmcapacity 60 degrees: square: 370 mmcapacity 60 degrees: flat: 370x600/450 mmsaw band length: 7260 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,8 tdimensions of the machine ca.: 5,85 x 3,7 x 2,7 m2-column double miter band saw for quick cuttingwith pusher system P15. Option P30Hydraulic saw frame lowering• NC controlled• Automatic angular positioning from + 60° to – 60°High quality automatic miter adjustmentSpecial development for cutting profiles and beams.The highest positioning accuracy is achieved via the new B&S positioning system”.reached. An intelligent NC control ensures smooth inter ...

: 1000 mm: 1000 mm: 1200x1000 mmsaw band length: 11300 x 80 x 1,3 mmtable height: 790 mmband speed: 14 - 60 m/mintotal power requirement: 18 kWweight of the machine ca.: 9,0 tdimensions: 5,0 x 1,68 x 3,15 mThe semi-automatic, hydraulic saws from the X-tech line offer the bestSaw technology and best performance when cutting special steels• The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise.• The chip conveyor is hydraulically driven and the speed is adjustable• All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee.• Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They ...

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 36 / 72 m/mindimensions of saw-band: 2950 x 25,4 x 0,9 mmweight of the machine ca.: 0,4 tDimensions (LxWxH): 1,5 x 0,9 x 1,5 Semi-automatic function:Vice closes and motor starts, saw head lowersfor the cut, motor switches off, saw head rises,Vise opens.Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container.The machine complies in all areas CE regulations!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 105 mmcapacity 90 degrees: square: 100 mm: 100 x 105 dimensions of saw-band: 1335 x 13 x 0,65 mmdimensions: 650 x 310 x 300 mband speed: 30 - 80 m/mintotal power requirement: 0,95 kWweight of the machine ca.: 18 kgAction PriceBerg & Schmid - assembly band saw PBS 90 ESCPowerful and particularly robust metal band saw withDie-cast aluminum saw table and stepless cutting speed forMiter cuts up to 60°Share of freight costs: EUR 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: NA mmthroat: NA mmworkpiece height: mmworking area: 200 mmworkpiece dia.: 200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBandsaw for ButcherThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.