saws wood used for sale (1,075)

Log band saw Hauslhof CTR800Hydraulics, demonstration machine, Bloch diameter up to 830 mm, total length 5800 mm, width 2300 mm, with hydraulic system for clamping, clamping, turning and lifting the Bloch Motor output power total at 100% ED 10 KwIncluding:CTR800H-Ver3CTR800H-KSDCTR800H-STHCTR800H-STH-VCTR-SSPCTR- 11CTR-VORCTR-AMPCTR-EGLCTR-LG AutomatCTR-Pump-EA

Demonstration machineThe new, state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper partincl. Pre-cutting device! For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. stem diameter

Demonstration machineSolid log band saw for a log diameter of up to 71 cm with extension sections that can be extended indefinitely. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. 3.8 inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE approved. Technical data:max. trunk diameter 71 cmmax. Board width 67 cmEngine output S1 5.5kW section length basic version 2.1mCutting length

Exhibition / demonstration machineThe new state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper part For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. trunk diameter 750 mmmax.

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Log band saw CTR710M, built in 2013, 12 m cutting length, incl. LG 100 and scoring machine, 6 kW, 550 kgPrices subject to change, errors, printing and typesetting errors excepted

Circular saw Elektra Beckum PKU250, good condition, year 2004, standard equipment, 2.7 kW S6, 83 mm cutting height, 1800 mm format table length, 800 mm table length, 800 mm table width, approx. 75 kgPrices subject to change, errors, printing and typesetting errors excepted

WACO + KUJAKON resaw line BKW, WACO twin resaw, type BKW-S, Feed speed up to 120 m/min, KUJAKON automation with de-stacking, infeed and stacking

Key data: 400 mm, 2200 mm

Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm 2 saw motors Motor power 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2500 mm 2 front stop rails 1 piece length 1200 mm, 1 piece length 2400 mm With extraction connection and pipe Including 10 saw blades with a diameter of 400 mm Weight approx. 1300 kg Shipping Dimensions 3900 mm x 1300 mm x H 1200 mm

STENNER resaw, type ST100, Resaw requires no pit or any special foundation., Machine specifications:, - Flywheel diameter 915 mm, - Max bandsaw width 100 mm, - Max. cutting height 380 mm, - Motor power 15 kW, - Touchscreen controller, - Digatal saw thinkness readout, - Automatic closing feeding roller, - Manual adjustment saw guide, - Manual adjustment feed roller, - Variable feed, - Blade lubrication

DIMTER automatic optimizing cross cut saw, type OptiCut S50

DIMTER automatic optimizing cross cut saw, type OptiCut S75

Track length 6 m Hand Feed Saw motor 5.5 kw

Automatic Pneumatic Workpiece Clamp  Cutting height 280 mm at 90 Cutting height 140 mm at 30 mm Engine power 11KW/15hp Separating cuts Mitre cuts  Schifter cuts, longitudinal sections  Throat rafters, eaves planks, Burrs, cutting wedge planks Roller conveyor strong version right  incl. roller table and longitudinal stop L=2500 mm side-movable Roller conveyor strong version left  incl. roller table and longitudinal stop L=2500 mm side-movable

The Spt model is equipped with an automatic loading system with lift table and slider  and collets  Furthermore, the machine has a pre-warehouse of plates Panel dimensions up to 4400 x 2200 mm

Cutting height 90 246 mm Cutting height 45 165 mm Cutting height 30 113 mm Fuse 32A Speed 3000 rpm Saw blade D650 mm

A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction

Band saw with 700 rollers Ready for operation on site

Key data: 300 mm

TECHNICAL DATA: Saw blade: Ø 300 mm Installed power: 3 hp EQUIPMENT: 02 Infeed and outfeed roller conveyors, each with a length of 1900 mm

Key data: 45 °, 1350 mm

TECHNICAL DATA: Carriage length: 1350 mm Saw blade: Ø 300 mm Saw blade inclination: 0 - 45°

Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

heavy-duty precision sliding table saw SCM SI 550 E Class Version: Carpentry - Carpentry Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds 2500/3000/4200 rpm Mitre stop with length compensation Saw blade up to DM 550 mm electr. Lifting and swivelling the saw blade with digital displays Machine from retirement / first delivery 2011 Machine is WORKSHOP TESTED in TOP CONDITION From stock Lieboch  

For sale is a high-quality table saw of the brand Ulmia, type 710 SN, serial number 10708, built in 1995. The machine comes from the renowned German manufacturer Ulmia and impresses with its robust design, precision and durability - ideal for carpenters, workshops or demanding craftsmen. Details: Manufacturer: Ulmia Type: 710 SN Serial Number: 10708 Year of Make: 1995 Operating voltage: 380 V The table saw is in used, functional condition and has always been used reliably. Ulmia machines are known for their precise cutting performance and solid construction, which makes this saw a stable and powerful solution even today. Ideally suited for precise longitudinal and cross-sections in the professional woodworking sector. Viewing and test run possible by arrangement.

Cutting length: 4.300 mmCutting height: 2.200 mmCutting depth: 80 mmoutput: 4,4 kwsaw blade diameter: 300 mmturning speeds: 4.750 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Raimann ProfiRip KM310 Multi-Saw Track width 330mm Maximum saw spacing 310mm Cutting height 120mm Bushing diameter 80mm Passage width up to 650 mm Feed speed up to 35m/min Electrically lifting the saw shaft Saw size 280-360mm Quickfix quick-change system Motor power 30kw CE Certificate Year of manufacture 2007 Net price 92.000PLN

DIMTER optimizing cross cut saw, type OptiCut 150