subcategories
(3rd category level)
Manufacturer:
(Category: 201)
Saw angled adjustable 0-45°, maximum cutting width: 600mm, equipped with edge guide with micro setting Auction-ID: A1-49000-33
Key data: 45 °, 2250 mm, 900 mm
400 V, 50 Hz, 5 Kw, 10 A, Sliding table 2250x270 mm, Boom table 950x600 mm, Cut-to-length stop 2650 mm, extendable, Cutting width 900 mm, Cutting height 90 mm, Saw blade 250-315 mm, Extraction connection 125 mm, Work table 1500x1000 mm, Weight 410 kg
Model FSK Dimension of sliding table- 3000x330mm Gross cut capacity- 2700mm Width of cut between saw blade and rip fence - 1650mm Saw blade diameter - 400mm Scoring saw blade diameter - 120mm Height of cut - 125mm Speed levels 3 Tilting saw blade - 0-45º Saws lifting, up and down, mechanical control. Main motor - 5,5 kW Scoring motor - 1,1 kW With clamp Weight: 780 kg Transport dimensions - 3100x1300x1200mm Price 1500 Eur (EXW Jonava, Lithuania)
Band Saw AMADA® HA - 400 ( HA-400 ) Saw band dimensions: 4570 x 32 x 1.066 mm Cutting capacity: 406 x 406 mm Cutting speed: 15- 75 m/min Roller conveyor: approx. 1.8 m Connected load: 7.55 kVA Belt motor: 5.5 kW Hydraulic pump: 1.5 kW Coolant pump: 0.18 kW Operating voltage: 220 / 380 - 415 V 3AC 50 Hz with documents ! Dimensions: 3970 x 2400 x 1800 mm Auction-ID: A7-49701-13
Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: Cutting height: 260 mm Saw blade diameter: 500 mm Input length: 400 6,300 mm Input thickness: 12 80 mm Feed rate: max. 250 m/min Cycle time: approx. 1 sec Saw motor: 7.5 kW Marking station: 5,000 mm Outfeed conveyor: 7.5 m with 3 pneumatic ejectors Control system: OptiCom Pro Condition: Gebraucht Location: Tauberbischofsheim, Germany
Technical data Manufacturer: KÖLLE Model No.: B 63 Design: Vertical band saw machine Saw blade length: max. 4,500 mm Saw blade length: min. 4,340 mm Configuration Large work table, mounted saw blade, height-adjustable upper saw blade guide, handwheel adjustment and parallel/workpiece stop. Side-mounted electric motor. Safety instructions available on the machine. Remarks Scope according to photo documentation. The machine comes from an ongoing production plant and was used regularly until the plant closed. Auction-ID: A7-49302-108
Carriage 3,30 m.Motor power: 5,5 kW Saw-blade tilting: 0? bis 46? Cutting height: max. 87,5 mm with sawblade ? 315 Saw-blade diameter: 250 - 400 mmRotational speed: 4000-4800-6000 rpm Cutting width: 1250 mm Scorer with 2-axes electrical positioningRipfence with motorised postioning
Cutting capacity: 4300 mm x 4300 mm.Sawblade height: 125 mm.Main motor 13,5 kW / scoring motor 2,2 kWSaw-carriage speed: 1-150 m/min. Returnspeed 150 m/min.Programm fence speed: 90 m/min (limited to 25 m/min)7 grippers, centers 75/275/475/1075/1825/2625/3425 mm.Machine control: CADmatic 4 ? ProfessionalHardware: Windows XP (US) TFT displaySoftware showing cutting plans 2-D/3-D, Graphic malfunction diagnostics by video.
Cutting capacity: 4300 mm x 4250 mm.Sawblade height: 95 mm.Main motor 13,5 kW / scoring motor 2,2 kWSaw-carriage speed: 5-130 m/min. Returnspeed 130 m/min.Programm fence speed: 80 m/min (limited to 25 m/min)7 grippers, centers 75/275/475/1050/1850/2650/3450 mm.Machine control: CADmatic4 air tables of 2160 x 650
Saw pulley diameter: 914 mm (34 )Saw pulley width: 90 mm (3,5 )Max. sawblade width: 90 mm (3,5 )Sawblade length: 5384 to 5587 mmMax. cutting height under the guide: 406 mmMax. opening feed rolls to sawline: 228 mm.Max. opening fence to sawline: 228 mm.Main saw motor: 15 kWFeedmotor: 1,1 kWTabel height from floor level (with pit): 812 mmTotal height from floor level: 2184 mm.
Cutting length up to 6200 mmCutting width up to 600 mmMax. cutting height 215 mmSaw blade diameter 400 to 650 mmMotor 15 kWFeed speed of the saw carriage, infinitely adjustable 0 - 80 m/min, motor 2,2 kWDust extraction connection: 2 x 160 mm diameterRequired extraction capacity 4340 m3/h
motor: 3 kWstroke: 60 cmmotor (saw) tiltingangle arm can be changedsawblade diameter: 350 mm
Saw blade length: 4390 mmCutting height: 345 mmmax. cutting width: 585 mmWheel diameter: 600 mmEngine 2,2 kWTable 680 x 680 mmSaw blade guideFoot brake
Table dimensions 830 x 600 mm, 30? tiltableWheel diameter 600 mm.Wheel width 25 mm.Max. cutting height 295 mm.Max. cutting width 510 mm.Cutting length: 4380 mm.Motor power 2,2 kW.Extraction nozzle diameter 80 mm.
Table dimensions 1080 x 700 mm, 30? tiltableWheel diameter 800 mm.Wheel width 40 mm.Max. cutting height 350 mm.Max. cutting width 660 mm.Cutting length: 5620 mm.Motor power 4 kW.Extraction nozzle diameter 120 mm.
Wood Band Saw Holzkraft HBS 840 AS Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Circular Wood Saw manufactured in 2021. This CAN CUT MC 930 features a cutting width of 1,100 mm and a maximum cutting height of 50 mm. It operates with a feed speed of 5-20 m/min and can accommodate up to 15 saw blades with a maximum diameter of 250 mm. If you are looking to get high-quality cutting capabilities, consider the CAN CUT MC 930 machine we have for sale. Contact us for further details.
Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 5.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price
Sawblade tiltable: 45 °Length of the rolling table: 3200 mmcutting width: 1350 mmMotor output: 5,5 kWCutting height: ca. 153 mm mmSaw blade diameter: 450 mmSpeed: 3000/4000/5000/6000 U/min.weight of the machine ca.: ca. 1.000 kg: Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wheel diameter: 600 mmCutting height: 380 mmcutting width: 580 mmMotor output: 2,2 kWTable dimensions: 600 x 540 mmTable tiltable: 45 Gradmachine weight ab.: 270 kg: Ja dimensions of machine: 2.085 x 1.035 x 820 mmcutting speed: 1.350 m/minsawblade width: 6-25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HEMA UH 800 YOC 1982 Motor power 4 kW Roller diameter: 800 mm max. cutting width: 780 mm Max. cutting height: 500 mm Saw blade length: 5,600 mm APA roller guide (Panhans) top + bottom Chassis incl. various Gebr. Band Saw Blades The machine was completely repainted. In addition, the machine was restored. The drive belts have also been replaced. Extraction connection: D 125 mm Dimensions: approx. 149 x 900 x 246 cm (W x D x H) Weight: 720 kg Manufacturer information
250 € 
