saws wood used for sale (1,075)

SICAR band saw mod. TOP 9 -Diam. flywheel mm. 900 - Year 1996 - Matr. 008037280596

cutting diameter: 340 mmdimensions of saw-blade: 4860 x 32 x 1,1 mmcutting range square: 340 x 340 mmcutting speed: 17 - 120 m/mindrive motor: 4 kWweight of the machine ca.: 2,5 tdimensions: ca. 2600 x 2600 x 1650 mmncl. chip conveyor and chip trayHydraulic bundle clamping deviceincl. electrical circuit diagramsthe previous owner only sawed at one speedAdjustable cutting pressure valveHSS bimetal saw bandHydraulic material and saw band tensioning with electrical monitoringAutomatic height adjustment of the saw frameAutomatic adjustment of the movable band guide armElectrical piece counterDigital display of the dimension preselectionConstant, hydraulic clamping of the carbide band guidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 0-45 °Length of the rolling table: 3350 mmcutting width: 1100 mmMotor output: 5,5 kWCutting height: 155 mmCutting height at 45°: 110 mmSaw blade diameter: 450 mmSpeed: 3000 | 3600 | 4200 U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FKS 550-3200 M A PRO Sliding table saw Saw blade tilt and height adjustment motorized and with digital display Scoring device with separate drive motor Motor 7.5kW 50Hz 400V Engine speed 2800 rpm. Format sliding carriage length 3200mm Saw blade inclination 90 – 45° Max. cutting height 90°: 200mm Saw blade diameter: 550mm Saw blade speed: 288/3665/4800 rpm G&STÜ-5200552

ALFAMACCHINE T350 double miter saw Dual rip for cutting at 45 degrees Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air demand 5-7 bar Cutting width: 15-80mm Cutting height: 10-80mm Net price

A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible.

Key data: 90 °, 3000 mm

SPECIFICATIONS: Carriage length: 3000 mm Saw blade: max. Ø 500 mm - with scoring blade max. Ø 400 mm Scoring blade: max. Ø 120 mm Manual height/tilt adjustment 45° Stop with retractable system Digital measurement for height - inclination - stop width Pitching power: 0.75 kW Sawing power: 5.5 kW EQUIPMENT: Miscellaneous Accessories Angle cutting device 0° - 90°

SPECIFICATIONS: Table size: 1200 x 800 mm Tilting table Flywheel size: Ø 800 mm Installed power: 4 kW

Key data: 5300 mm, 2200 mm

Striebig Automatic 6220AV Panel Saw Brand: Striebig Type: Automatic 6220AV Year of Make: 1985 M-No.: 14118 Max. cutting height: 2,100 mm Max. cutting length: 5,300 mm Max. cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Motor power: 4.4/5.5 KW Saw blade speed: 4,750 rpm Bottom support: Rollers Small parts edition: Yes Measuring system: analog Swivel saw unit: manual Saw feed: manual Mounting: freestanding with rear stand Extraction: ø100 mm Saw bar locking: manual Dimensions: 6.5 x 2.5 x 1.3 m

Key data: 5300 mm, 2100 mm

Striebig Automatic 6220AV Panel Saw Brand: Striebig Type: Automatic 6220AV Year of Make: 1985 M-No.: 14118 Max. cutting height: 2,100 mm Max. cutting length: 5,300 mm Max. cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Motor power: 4.4/5.5 KW Saw blade speed: 4,750 rpm Bottom support: Rollers Small parts edition: Yes Measuring system: analog Swivel saw unit: manual Saw feed: manual Mounting: freestanding with rear stand Extraction: ø100 mm Saw bar locking: manual Dimensions: 6.5 x 2.5 x 1.3 m

Key data: 4600 mm, 2070 mm

Striebig Panel Saw Compact 5207 TRK - 2005 Brand: Striebig Type: 5207 Compact TRK M-No.: 30215 Year of Make: 2005 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm RPM: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,070 mm Max cutting height: 1,958 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,838 mm Machine depth: 1,428 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

Key data: 4600 mm, 2200 mm

Striebig Panel Saw Compact 5220 Brand: Striebig Type: 5220 Compact with TRK extraction M-No.: 41596 Year of Make: 2010 Motor 3.0 kW - 3 400V 50Hz Saw blade: 250mm (ID 30 mm) Shaft: 30 mm Rpm: 5,250 rpm Dimensions: Max cutting length: 4,600 mm Max cutting height: 2,200 mm Max cutting height: 2,100 mm Saw depth: 60 mm Machine length: 5,826 mm m Machine height: 2,980 mm Machine depth: 1,466 mm Guide rollers: roller support - braked Small Workpiece Support: Yes Length Strokes: Analog Swivel Saw Unit: Manuel Saw feed: Manuel Machine Stand: Freestanding A-Shape Saw Frame Suction: 2ø100 mm TRK suction Saw Position Fixation: Manuel Equipment: Emergency stop Engine braked

Key data: 2 kW, 4 kg, 14 kW

Holzma HP72 Optimat - Horizontal sizing saw Brand: Holzma Type: HPP82/43/43 Optimat M-No.: 0-240-0 Year of Make: 2001 Control with Cadmatic Holzma CAD Matic Optimization Junior Cadmatic – on line Total connected load: approx. 26 KW Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 95 mm Saw height: 82 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 7 Program Trolley Feed: Step-Free Air cushion device 4 pcs. Table dimensions: 3 (1,760650) + 2,170650 mm Suction nozzle diameter: 250 mm Extraction volume: 5000 m³/ h

Key data: 700 mm, 680 mm

NRA700 Band Saw Brand: Agazzani M-No.: Year of construction: Motor 2.2kW Table surface: 740640mm Wiel diameter: 700mm Cutting height: 405 mm Band width: 680mm Band Saw Length: 5020/51400mm Band saw width: max. 40mm Tilt (table): 45° Table Levels: 960 Suction support: ø120 mm Machine dimensions: 1.3506702.170

Key data: 880 mm, 880 mm

Brand: Centauro M-No.: 2064 Year of Make: 1996 Motor 5.5 kW, with electro-pneumatic rem Table surface: 1,100800 mm Wiel diameter: 900mm Cutting height: 550 mm Band width: 850mm Belt length: 6,190 - 6,380 mm Band width: 30 - 50mm Tilt (table): 45° Table height: 960 mm Suction support: ø120 mm Machine dimensions: 925 KG Noise: 82.3 dB(A) Standard: CE

Key data: 45 °, 1350 mm, 850 mm

Altendorf TKR45 Brand: Altendorf Type: TKR45 M-No.: 79-11-204 Year of Make: 1979 Cutting length 1350mm Surface-mounted table Yes Cutting width 850mm Cutting height (max) 155mm Saw blade (max): ø450 Main saw shaft ø30 Saw blade inclination: 0-45° Motor 5.5 kW Speed 3000/4000/5000 omw/m Weight 910KG

Key data: 45 °, 3200 mm, 1250 mm

Griggio Unica 400 sliding table saw Mark: Griggio Type: Unica 400 Year of Make: 2010 M-No.: MC00101468 Main saw: ø400 mm, saw protrusion 125 mm, inclination 0-45° Saw blade height-, -bevel adjustment: electric with digital display Speed: Saw blade protruding: 0-125 mm electric with digital display Saw blade tilt: 0 - 45° electric with digital display Motor: 7.5 KW Vorrits saw: 0.75 KW, ø125 mm Trolley 3,200 mm Cutting width: 1,250 mm electrically with digital display on the width stop Length stop: 2,200 - 3,300 mm Lay-down table: steel with scale angle display, adjustable support support and product-friendly roller Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 820 KG

Key data: 92 °, 3300 mm, 1350 mm

.

Key data: 45 °, 3300 mm, 1350 mm

.

Key data: 45 °, 3300 mm, 1250 mm

MARTIN T73 AUTOMATIC, parallelogramtic, driven trolley, 3-axis control Mark: MARTIN Type: T73 AUTOMATIC Year of Make: 2001 Table dimensions: 1,350 x 1500 mm. Cutting width: 1,350mm Edging table: 3,300mm Main saw: 7.5 kW Saw blade shaft: ø30 mm. with two drive pins Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø 400 mm retractable under table; Cutting height: 170 mm. (Saw blades. 500 mm.) Saw blade swivel: 0 - 46° Scoring: Optional (Could be installed for € 1,750 surcharge) Cutting width: 1,350 mm Rip fence: Stop ruler in anodized aluminum; Final position; Automatically lowers below table level Length stop: Digital length stop made of anodized aluminum with Martin 2-point stops Control: NC control with LCD display of width, height and oblique angle, plus 2 digital length stops Screen: LCD control panel at eye level, swive ...

Artiglio R800 reducer saw with centering tool Wheel diameter 800mm Maximum saw blade width 80mm Cutting band length about 5550mm Main Motor 15kw Tilting work table Auto Center Protector Feed ARTIGLIO RSA 80 Feed speed controlled by variator

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; 3-axis electric scoring adjustment Brand MARTIN Type T72A Aut Year of Make: 1997 Control panel: At eye level in the extraction support, integrated with 3-axis NC control, electric saw hood, height adjustment and 3-axis scoring Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Saw hood: Electric height adjustment Landing table: Steel (galanized) with fixed detent points for mitre angles 0°, 22.5°, 30° and 45° or freely selectable intermediate interlocking angles Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with 2 point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2000/275 ...

Key data: 45 °, 3300 mm, 1250 mm

Martin T72A Sliding table saw with NC-controlled cutting width, electric blade height, inclination; Brand MARTIN Type T72A M-No.: V238101 Year of Make: 1997 YouTube: Control panel at eye level integrated in the extraction support Saw blade height adjustment: Electric with digital display in the screen Saw blade tilt: Electric with digital display in the screen Parallel stop: NC control with digital display in the screen Landing table: parallelogram cross table Length stop: Aluminium 2,200mm, extendable up to 3,200 mm with digital 2-point stops Main saw: ø450 mm, cutting height: 170 mm, saw swivel: 0° - 46° Speed control: 2800/4000/5500 rpm Motor: 5.5 KW Trolley: 3,300 mm Cutting width: 1,250 mm Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 1,600 KG

Key data: 45 °, 3300 mm, 850 mm

Martin T72A sliding table saw with: hydraulic saw height and digital display at eye level Hydraulic saw blade swivel and digital display at eye level Handwheel adjustment of the cutting width and digital display at eye level Parallelogramtic for angular sections -46° to 46° and digital readout Scoring saw Brand MARTIN Type T72A Comfort Year of Make: 1999 Control panel eye level integrated in the extraction support (saw blade height, inclination, cutting width) Saw blade height adjustment: Hydraulic with digital display in the screen 0-170 mm Saw blade tilt: Hydraulic with digital display in the screen 0- 46° Parallel stop: handwheel adjustment with digital display in the screen Saw hood: Electric height adjustment of the hood Manual move to the right for oversize products to saw Landing table: Aluminium parallelogramtisch +/-46° miyt digital angle display Leng ...

Key data: 45 °, 3300 mm, 1250 mm

Equipment: - Scoring saw unit - Trimming length 3300 mm - Cutting width 1250 mm, adjustable by handwheel, digitally displayed in control panel, width stop can be folded down - Cutting height and angle above hydr. Foot pedal adjustable, digitally displayed in control panel - Saw blade Ø 200-450 mm - Speed 2800 / 4000 / 500 rpm, manually adjustable via belt flip - Electrics: 380 V, 50 Hz, 3~, 13.0 A

BRENTA resaw, type DDP 150, Machine specifications:, - With centre feeding device, - Flywheel diameter 1500, - Flywheel width 185 mm, - Clutch for speed adjustment, - Hydraulic driven feeding rollers, - Motor power 37 kW, - With control unit and accessories

HOLTEC mobile package cross cut saw, type HF 121

EWD - GILLET log bandsaw line with canter and double-cut, - Heavy duty log loading deck, - EWD hydraulic log carriage, type EW 1000, - GILLET canter, type SL, - GILLET bandsaw machine, type TO1600, - Outfeed conveyor, - Control unit with Mudata controller

WEINIG moulder, type Hydromat 22B, Machine specifications:, Planing width 220 mm, Planing height 120 mm, Feed speed 6 – 60 m/min, Motor power hydraulic feeding 15 kW, Spindle layout:, 1. Horizontal bottom spindle, motor power 11 kW, 2. Vertical right spindle, motor power 7.5 kW, 3. Vertical left spindle, motor power 11 kW, 4. Vertical right spindle, motor power 7.5 kW, 5. Vertical left spindle, motor power 7.5 kW, 6. Horizontal top spindle, motor power 11 kW, 7. Horizontal bottom spindle, motor power 15 kW, 8. Horizontal top spindle, motor power 11 kW, 9. Horizontal bottom spindle, motor power 7.5 kW, - Hydraulic front bearing for spindle 1, 6 - 8, - Equipped with jointers, - Surface table 2500 mm, - Spindle diameter 50 mm, - Automatic lubrication system, - Driven feeding rollers in table, - Heavy duty cardan feeding, - Digital read out feeding speed, - Incl. accessories

LBL BRENTA headrig, type XBE 180 R, Machine specifications:, - Diameter flywheels 1800 mm, - Width of flywheels 285 mm, - Maximum sawblade 311 mm, - Saw blade protection, - Motor 150 Hp