Manufacturer:
(Category: 308)
Used SJ 50/30 filament production line equipped with an air-cooled head. Technical parameters: - screw diameter 55 mm - L/D 30, effective screw length 1500 mm - Screw rotation speed: 60 rpm - forced feed unit for raw material to the plasticizing system with a power of 1.5 kW / vertical screw system with cylinder . - Main drive motor power 12 kW - capacity approx. 50 kg/h Heating sections and power : - Cylinder 6 kW / three heating sections plus head - Head connector / mechanical screen exchanger with a power of 2 kW - Air cooling of the cylinder and head / motor with a power of 0.18 kW - Raw material: PP/PE ABS/PLA/PETG plastics Weight approx. 800 kg.
Year: 2006 - technically efficient, ready to work – after full service - flash limitation: 0.2-2 mm - maximum welding length: 2600 mm - support arms - PLC controller
Used plasticizing system, diameter 120 mm. Technical parameters: - screw diameter 120 mm - barrel diameter 120 mm L/D 33 mm - 6 heating sections/heaters with a power output of 4300 W - complete set of fans with housings - double degassing section - complete power supply for heaters and fans. The plasticizing system is in good condition, with a capacity of approximately 400 kg/h.
An Arburg plastic granulate dryer with integrated material conveying is available. Hopper volume: 100l, max. drying temperature: 150°C, heating capacity: 4.5kW, air capacity: 90m³/h, conveying height: approx. 3000mm, machine dimensions X/Y/Z: approx. 950mm/600mm/2000mm, weight: approx. 150kg. An on-site inspection is possible.
A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. ...
We sell a high performance doming machine Machine for the production of LED and electronic encapsulation, 3D stickers and much more. The doming machine is designed for production with 2K polyurethane or UV doming resin and offers flexible applications, e.g. for the casting of LED light strips, for electronics sealing or doming stickers Condition: very good Our doming system is designed for industrial continuous load: precise axes, volumetric gear metering, and user-friendly software. Whether it's LED potting, electronic coating or 3D stickers, you get a machine that reduces your unit costs while keeping quality consistent. An all-rounder for series production for maximum cycle time and large components. With a height-adjustable, mobile work table, for a flying change in continuous operation without downtime, ideal for wide range of applications. IN A NUTSHELL • Hig ...
A Westema cutting table for precise cutting of soft, flexible materials is available. Table dimensions X/Y: 2250mm/1500mm, max. cutting height: 230mm, cutting speed: 16m/s, motor power: 1.1kW. Including quick clamping and grinding device. Documentation available. An on site inspection is possible.
Costarelli D1300 fully automatic agglomerator, 315 kW drive, was processing LDPE, can be used for film, fibers, fluff, light abd voluminous plastic materials to massive volume reduction., throughput rate around 1 Ton per hour, depending on moisture and material, including : loading conveyor belt, feeding belt, barrel diam.1.300 mm., extraction hopper, screw conveyor, roto-classifier, electric cabinet, 400 V 50/60 Hz, CE compliance certificate, electrical drawings, Users manual, Machine in very good conditions, -------------------------------------------------, watch some videos of similar agglomerators in the attached videos, capacity: 1.200 kg/h, conditions: very good, type: 1.300 mm , Totale power needed for this line: around 500 KVA, including belts, classifier, screws., Including: loading conveyor belt
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 14.000 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, inspection hatch on barrel, loading hopper, control panel, capacity: 5.000 kg ca, conditions: used
A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible.
A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible.
For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.
For sale is an EPS block mold, manufacturer Erlenbach, year of construction 2008, 5000 mm x1300 mm x1000 mm, vacuum system, The system ran very well until the end. The facility can be visited by prior appointment
M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.
M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)
USED VERTICAL MIXER, constructed in sturdy carbon steel, Nominal capacity 8.500 lt.ca, Total height mm.5.340, Ø 2.200 mm, weight kg.1.550, inspection hatch on barrel, bottom discgarging pipe 200 mm.Ø at 950 mm from ground, total discharging dor cleaning purposes through 400 mm Ø pipe, loading hopper at 950 mm from ground, 15 kW drive, control panel, capacity: 5.000 kg ca, conditions: used
Year: 2011 - technically efficient, ready to work – after full service - WT 535B automatic rotary station - disc cutter: 250 mm - windows PC control - profile recognition system - for turning tools on and off as needed - extensive tool equipment
Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device
A maintenance-requiring Dremel 3D plastic printer is available. Filament diameter: 1.75mm, materials: PLA/ECO-ABS/PETG/Nylon, build dimensions X/Y/Z: 255mm/155mm/170mm, min. layer thickness: 0.05mm, max. extruder temperature: 280°C, device dimensions X/Y/Z: approx. 550mm/400mm/400mm, weight: approx. 20kg. On-site inspection is possible.
Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible.
Farsoon SS403P-H (Year of manufacture 2023) – Industrial 3D printer including peripherals, For sale is a Farsoon SS403P-H, year of construction 2023, with under 11,000 operating hours. The system is in a well-maintained, operational condition. The last maintenance was performed in 2024 and 2025through which technically proper operation is ensured., The offer includes a complete production setup including relevant peripheral devices and is thus ideal for direct deployment in an industrial manufacturing environment., ---------------------------------------------------------------, scope of delivery, - Farsoon SS403P-H 3D printing system, - Escape station (Powder removal / component uncovering), - Industrial cooler, - Nitrogen generator, - Accessories and operationally relevant components (upon agreement), ---------------------------------------------------------------, Technical specifi ...
STRAND PELLETIZER 250 mm., Fixed pitch, 4 kW motor, 4 poles, IE3 motor drive, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 4,0 kw, availability: 70 working days ca, working width: 250 mm, conditions: new machine, type: strand pelletizer for extruders
