Manufacturer:
(Category: 308)
For sale is an EPS pressure pre-expander, manufacturer Dae Kong, type DKF 3600, with material feed, flow bed dryer, sieve, automatic weight control, control Siemens, Discharge capacity 20g/l ---- 2000 kg 17g/l -----1700 kg the pre-expander is in very good condition.
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg
Model Designation 700kN PELLETER Modes of Operation Automatic/Manual Configuration Single Station Design Self-contained Direction of pressing Horizontal Material loading Automatic Material Unloading Semi-automatic Drive Self-contained Main Ram Pressing Force (max) 700kN | 70 Tons Main Ram Pressing Force (min) 70kN | 7 Tons Main Ram Stroke (max) 70 mm | 2.75 ins Max Hopper & Die Stroke 184 mm | 7.25 ins Max Fill Length 76 mm | 3 ins Min Fill Length 25 mm | 1 ins Hydraulic Oil Specification ISO 32 Oil Tank Capacity 300 Ltrs 66 Galls Hydraulic W ...
BLS Lamination Press has been rebuilt to meet your lamination needs. Specifications: Tonnage: 20 Ton Max Temperature: 150°C Electric Heated Platen Table Size: 600 mm x 600 mm Daylight: 425 mm Open/Closing Speed: 10 mm/s Omron PLC HPU
Bespoke built Hydraulic press for the manufacture of airplane seat back Force: 100 ton Table size 2000mm x 2000mm Platens drilled for oil heating Run out table Omron PLC Cylinder in need for repair, oil heater not included
Swivelling angles: 45°/90°/135°, max. speed: 2800rpm, working length: 5350mm, saw blades: 2 carbide-tipped saw blades 420x30mm, extraction connection: 160mm, compressed air connection: 6-8bar, power per motor: 2.2kW, length: 4200mm, weight: 900kg. Features: hydropneumatic saw feed, digital display, center support, handwheel, four pneumatic clamping cylinders, electrical control for parallel operation of machine and extraction system, fixed stop 24mm next to the fixed saw unit, adjustable via scale, with documentation. An on-site inspection is possible.
This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information.
Heating rail TG 200 mØ from Herz for heating thermoplastics (e.g. acrylic glass) After selective heating, the acrylic glass plate can be bent slightly. A video of the running machine can be sent on request. Two-sided heating system via black radiator and digital temperature controller as well as automatic timer Timer starts automatically when the top flap is closed to the preset value. After the time has elapsed, a warning signal sounds to remove the material. Maximum working width approx. 2000mm maximum plate thickness according to the manufacturer up to 12mm due to heating of the plate on both sides Connected load 230Volt / 2800Watt with practical rip fence up to 1000mm depth CE mark Instruction manual Dimensions approx. 2500 x 1200 x 200mm (LxWxH). Weight approx. 35kg. The machine can be demonstrated on site by appointment. We offer only machines that are read ...
Rotox Water Slot Mill
Single Head Corner Welding Machine
PIOVAN temp controller THW118-F (2021) tempering unit 400 - V3 - Ph50- Hz20 - kW5 - KA31 - 31 A120 kg
HB THERM 140 Z 2 (2010)16KWMeasurement range 0–400 °CResolution 0.1 °CRegulation accuracy ±0.1 KTolerance ±0.8 KFlow measurementMeasuring range 0.4–40 l/minResolution 0.1 l/minRegulation accuracy ±0.1 l/minTolerance ±(5% of measured value + 0.1 L/min)Pressure measurementValue UnitMeasuring range 0–20 barResolution 0.1 barTolerance ±5% of final valueTechnical data O8360-CS 2023-08 25 3.2 Emission value unitPermanent sound pressure level <70 dB(A)Surface temperature (back side of the device) >55 °C 3.3Operating conditionsTemperature range 5–40 °C Relative humidity 35–85 % RHMinimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm
Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg
This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details.
This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details.
Thermoforming machine manufactured in 2014. This FRIMO FTL 80/200 Fullflex has a total of 1,260,207 cycles and a machine weight of 18,000 kg. It features dimensions of 15,000 x 9,600 x 7,650 mm and operates at a connected load of 172 kVA. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO FTL 80/200 Fullflex machine we have for sale. Contact us for further details.
PLASTIC ELECTROPLATING PLANT ENTHONE GMBH, BJ. 2012: Automated system / area of application: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Goods window per product carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per product carrier, cycle time 3.00 min. system, cycle time 2.50 min. demetallization / output: 20 pcs. merchandise carriers per hour, clearance anode/anode chrome 700 mm, Copper 700 mm, nickel 700 mm, clear retraction dimension 550 mm in the direction of travel, 3100 mm in width, bath dimensions (rinsing) 3100 mm x 700 mm, / power consumption: drives: transport system 133 KW, filter 194 KW, exhaust air 229 KW, sewage system 150 KW, switchgear 704 KW, rectifier approx. 3190 KW, heating energy approx. 1410 KW / consisting of: automa ...
New, 250 hours of use • Feeds ground material from 6 to 10 mm and micronizes it to 500-600 μm; • Suitable for micronizing PP, PE, PS, ABS, PA, APET, and PMMA; • The material is fed into the center of a set of fixed discs and a set of rotating discs at high speed, with centrifugal force bringing the micronized material to the conveyor line; • Feeds through a stainless steel hopper with a vibrating feeder; Model Disc Diameter Motor Power Fan Flow Rate MP500 500mm 55 kW 7.5 kW 300 - 400 kg/h
CRUSHER ADLER 22 KW ADLER 22 KW Shredder This shredder is equipped with a reel winder for automatic material feeding. Winding pressure management. 1500 mm cutting chamber. Equipped with two turbines for big bag installation. Ideal for film. Reconditioned equipment. Shredder weight: 2350 kg Motor power: 22 KW Chute dimensions: 1500 x 180 mm Rotor type: hollow Rotor diameter: 250 mm Rotating blades: 3 x 5 Fixed blades: 2 x 5 Hourly production capacity: 300 to 500 kg/h Built-in cyclone
THIMON Shrink Wrapping Machine Brand: THIMON Model: HOTPAL 2000 Year of commissioning: 2011 Cycle counter: 114,250 Gas type: Propane Heating power: 370 kW Installed power: 13 kVA Voltage: 400V TNS Frame dimensions: 1450 x 1650 mm Maximum pallet dimensions: 1000 x 1200 x 2650 mm Maximum gross pallet weight: 1500 kg Machine weight: 2200 kg Comment: Equipment supplied includes shrink frame, lifting table, and safety enclosure with light curtains. Very good condition. Maintained by the manufacturer.
A compact Getecha edge trim granulator is available. Inlet opening X/Y: 254mm/305mm, drive power: 3.7kW. An on-site inspection is possible.
An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.
JBF UC 47 Shredder Motor 7.5KW Cutting shafts approx. 47cm long x 50cm wide Low-speed manufacturer, German manufacturer Weight approx. 1t Long 1.90cm High 2.30cm Wide 1.10cm We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message
Year: 2009 - technically efficient, ready to work – after full service - pneumatic clamps - cutting at 45° - two cutting discs: 225 mm + two scoring blades - measuring slider
M. No.: 02022348 Equipment / Additional information: 50 Hz 140 m³/h 60 hPa
A Dreher plastic granulator is available. Rotor diameter: 270mm, rotor width/working width: 820mm, feed opening X/Y: 820mm/260mm, motor power: 18.5kW, throughput capacity: approx. 300kg/h, weight: approx. 1000kg. Including equipment cladding. Documentation available. An on-site inspection is possible.
Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm
Offered is a modular hot water belt continuous dryer. Heating medium: hot water heat exchanger, temperature level: supply 120°C / return 80°C, air volume flow: 1000m³/h, instrumentation: (TI), (PI), (FIC), integration into central PLC control system, prepared for vacuum pumps (P7101), connection: screw conveyors (M7301/M7302), 6-fold silo battery (S7501-S7506), rotary valves (M7501-M7506). Viewing by appointment possible.
1.250.000 € 
