Inv. Num. : 8433 Type: F190 CR Producer: Stratasys Generated: Parameters: Scope of delivery: PC with software Filament dryer Washing machine to remove the support material Filament vacuum cleaner Printheads and pads Number of filament spools
STRATASYS F270 FDM 3D printer was built in the United States by STRATASYS. The machine is used for prototyping and production of components with complex geometries in the FDM technology, which involves applying successive layers of molten material according to pre-calculated print paths. The process uses a combination of a build material (ABS, ASA, PLA) and a support material (QSR). 3D printing is performed inside a sealed work chamber by two print heads. Throughout its lifetime, the F270 industrial 3D printer has operated for a total of 17000 hours and has been regularly serviced. During the service work, the touchscreen display, power board, material drawer rail, material feed lines to the heads and Y-axis gantry were replaced. The STRATASYS 3D printer is offered with additional print heads. Technical specifications of the STRATASYS F270 FDM printer - software: GrabCAD Print - ...
Manufacturer:STRATASYS Model: J750 Year of Manufacture: 2021 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Stratasys Model: F370 Year of manufacture: 2021 Machine type: FDM Printer (3D printer) Condition: In perfect working order; can produce a test part or be inspected. Post-processing equipment included: 1 SCA 3600 support-removal tank, also in perfect working order New materials and accessories included: - 6 boxes of Stratasys caustic soda, ref: 300-00600 - 7 new spools of translucent PLA - 1 new spool of light blue PLA - 1 new spool of yellow ASA - 5 boxes of new build trays - 1 box of new high-temperature build trays - 7 new PLA cooling print heads - 4 new PLA extrusion print heads - 1 new elastomer print head - 4 new support/model print heads - 1 new ABS CF10 print head - 11 various opened spools Find more here - .ucymachines/ Contact us at - sales@ucymachines
2013 Stratasys Objet24 The Stratasys Objet24 has a build size of 234 x 192 x 148.6 mm (9.21 x 7.55 x 5.85 in.). Total time on printer is 1111 hours. It got some material left, about 1.4kg and support about 2kg. Cleaning solution (about 4kg), wastebags, manuals, training program(paper form), firmware, rollerblade and some more accessories are included. It uses an offline postprocessor from Stratasys and not the grabcad print witch is very handy so no need for ethernet connection. The machine is in use right now and it is fully functional. Screen not included. Find more here - .ucymachines/ Contact us at - sales@ucymachines
We are selling on behalf of the customer a Stratasys F170. The machine is generally in good condition except for one print head (ABS). The PLA and QSR support head work flawlessly., Stratasys F170 accessories:, - 16x Build-Trays (P/N 333-00302), - 1x PLA Natural Translucent (P/N 333-601319 with datecode 22.02.17, - 1x PLA Light Gray (P/N 333-60109) with date code 07.04.17, - 1x ABS Ivory (P/N 333-60300) with datecode 19.05.21, - 3x ABS Black (P/N 333-60301) with date code 28.05.25, - 1x ABS Red (P/N 333-60303) with date code 05.07.21, - 1x ASA Ivory (P/N 333-60500) with date code 13.03.17, - 2x QSR-Support (P/N 333-63500) with datecode 19.05.25, network connection: LAN (Ethernet), W-LAN, software: GrabCad Print (Download), GrabCAD Print Pro (available from the manufacturer), Installation space (x,y,z): 254 x 254 x 254, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (only ...
This 3-axis Stratasys Objet260 Connex 3 was manufactured in 2017. It features PolyJet multi-material 3D printing technology and has a material capacity of 8 slots, including 6 model slots and 2 support slots. The machine is equipped with an external material cabinet and is certified with CE, FCC, and EAC markings. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Objet260 Connex 3 machine we have for sale. Contact us for further details.
This 3-axis Stratasys F270 was manufactured in 2018. It features a maximum build size of 305 x 254 x 305 mm and offers multiple material delivery options with four spool bays. The machine is designed for various model materials including PLA and ABS-M30. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys F270 plastic 3D printer we have for sale. Contact us for further details.
This 3-axis Stratasys F370 was manufactured in 2017. It features a maximum build size of 355 x 254 x 355 mm and supports various materials including PLA, ABS, and PC-ABS. The machine includes four material spool bays for efficient operation. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys F370 plastic 3D printer we have for sale. Contact us for further details.
This 3-axis Stratasys Fortus 450mc was manufactured in 2018. It features a working area with an X-axis width of 406 mm, Y-axis depth of 355 mm, and Z-axis height of 406 mm. The machine supports a variety of materials including ABS-M30, Nylon 12, and ULTEM. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Fortus 450mc machine we have for sale. Contact us for further details.
This 3-axis Stratasys J55 Prime was manufactured in 2021. It features a build volume of up to 22,000 cm² and a maximum part size of 1,174 cm², allowing for versatile 3D printing capabilities. With a layer thickness of 18 microns, it produces high-quality smooth surfaces and supports over 640,000 color combinations. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys J55 Prime machine we have for sale. Contact us for further details.
Stratasys J750 DAP – Economic value through realistic anatomy simulation, The Stratasys J750 with Digital Anatomy Printer (DAP) Upgrade is not only a technological investment – it is a strategic tool for Cost reduction, process optimization and risk minimization in medical and medical-technical applications., ---------------------------------------------------------------, Your economic benefit, 1️⃣ Reduction of operation times, Patient-specific anatomical models enable more precise preoperative planning., → Shorter intervention times, → Lower operating costs, → Reduced complication risks, Already a few avoided operating minutes per procedure can significantly amortize the investment., ---------------------------------------------------------------, 2️⃣ Fewer revision and incorrect decisions, Reality-realistic tissue simulation allows testing of surgical strategies or i ...
Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.
Manufacturer: Stratasys Model: F370 Year of Manufacture: 2020 Operating hours: 3,493 Construction volume: 355 × 254 × 355 mm Variety of materials: ABS-M30, ASA, PC-ABS, TPU 92A, etc. Reliability: Closed build chamber with controlled temperature User-friendly: touchscreen, easy material handling, automatic calibration Software: GrabCAD Print compatible Power connection: 230 V Condition & Accessories: Very well maintained, no damage Fully functional 2. Material print head for CF material included Various printing materials included (some leftovers, but also originally packaged spools) Find more here - .ucymachines/ Contact us at - sales@ucymachines
We are selling a Stratasys F170 on behalf of a customer. Stratasys last performed maintenance in May 2024, and since then, less than 20 hours of print time have been added. The machine is in excellent working order and comes with many accessories. Runtime under 1600 hours., Stratasys F170 accessories:, - 13 pieces of build trays, - 1 roll of ASA Blue in original packaging, - 1 PLA print head, - 1 pc. PLA Cooler, - 1 elastomer print head, - 1 x ABS print head (currently installed), - 1 x QSR print head (support material, installed), - 1 pc. wash-out station, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (download), GrabCAD Print Pro (available from manufacturer), Installation space (x,y,z): 254 x 254 x 254, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-M30, ASA, PLA, QSR Sup ...
Full-color MultiMaterial 3D printer J720 Dental for laboratory use. In very good condition., Installation space in mm (x/y/z): 490x390x200, Layer thickness: up to 14 micrometers, Dimensions in mm (w x h x d): Printer: 1400x1260x1100 Material cabinet: 670x1170x640, Weight in kg: Printer: 430 Material cabinet: 152, building material: Dental material – VeroDent (MED670) and VeroDentPlus (MED690) • Vero™ family made from opaque material, including neutral shades • Bright colors such as VeroCyanV™, VeroMagentaV™ or VeroYellowV™ • Tango™ and Agilus30™ product families made from flexible material • Transparent VeroClear™, Digital materials: Unlimited selection of composite materials, e.g.: • More than 500,000 colors • Material for reproducing soft fabric in different Shore-A hardness levels • Transparent tints • User-developed composite material, support material ...
On behalf of a customer, we are selling a Stratasys F370 FDM 3D printer in good, well-maintained condition. Slight signs of wear on the housing (see photos). Last service carried out by Alphacam in 2024. Actual printing time approx. 6,000 hours., Stratasys F370 Accessories:, - 9 Build Trays, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: PLA, ABS, ASA, TPU92A, ABS-ESD7, PC-ABS, ABS-CF10, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing technology: FDM - Fused Deposition Modelling, number of nozzles: 2, Nozzle diameter: T14 (0.3556mm), Layer thickness: minimum 0.127mm, operating hours: ap ...
