436 other machines for plastic used for sale

Granule dryer, granule drying system, granule conveyor, vacuum conveyor-Manufacturer: Digicolor, granule conveyor vacuum conveyor-Type: unfortunately without type designation-Housing: material VA-Individual components/dimensions: see photos / technical. drawing-Total dimensions: 930/870/H2880 mm-Transport dimensions: 930/870/H2280 mm-Weight: 141 kg

Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.

Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min 

Machine for making plastic sleeves for bottle etc. Sleeve width 20 -200 mm Speed 200 m/min Accessories: 2 containers for solvents,  Extraction with blower, Perforation

STRATASYS F270 FDM 3D printer was built in the United States by STRATASYS. The machine is used for prototyping and production of components with complex geometries in the FDM technology, which involves applying successive layers of molten material according to pre-calculated print paths. The process uses a combination of a build material (ABS, ASA, PLA) and a support material (QSR). 3D printing is performed inside a sealed work chamber by two print heads. Throughout its lifetime, the F270 industrial 3D printer has operated for a total of 17000 hours and has been regularly serviced. During the service work, the touchscreen display, power board, material drawer rail, material feed lines to the heads and Y-axis gantry were replaced. The STRATASYS 3D printer is offered with additional print heads. Technical specifications of the STRATASYS F270 FDM printer - software: GrabCAD Print -  ...

Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill

Installation space (x,y,z): 297 x 210 x 200 mm, printing technology: Multijet technology, Layer thickness: 20µ, 15µ, resolution xy: 635 x 400 DPI, equipment: Software, cable, heat bath, file formats: STL, network connection: Ethernet, mass: 188 kg, Dimensions: 1360 x 944 x 700 mm (H x W x D), mains voltage: 100 - 240V, 50/60Hz,single phase, max. 750 VA, Legal regulations: CE approval mark, Installation: 2015, Accessories post processing: On demand, Net installation space for models: 297 x 210 x 200 mm, printheads: 1 piece, Interface: Modeling Studio, software: Windows 32Bit / 64Bit, printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]), support material: AR-S1 (water soluble support material), Accessories post-processing: On demand, Installation space (x,  ...

Brand new 3D printer Sinterit Lisa Pro for sale (used once)., Specification:, - built-in nitrogen chamber, - Nitrogen consumption: 0.48 m³/h, - Heating system with max. chamber temperature: 200°C, laser: IR Laser Diode 5 (W), Installation space in mm (x/y/z): 150x200x260mm, Accuracy (typical): 0,05mm, Weight in kg: 89, Dimensions in mm (w x h x d): 680x510x900mm

Full-color multi-material 3D printer J720 Dental for use in the laboratory. Very good condition., Installation space in mm (x/y/z): 490x390x200, Layer thickness: up to 14 microns, Dimensions in mm (w x h x d): Printer: 1400x1260x1100 Material cabinet: 670x1170x640, Weight in kg: Printer: 430 Material cabinet: 152, building material: Dental Materials - VeroDent (MED670) and VeroDentPlus (MED690) • Vero™ family of opaque materials, including neutral shades • Bright colors such as B. VeroCyanV™, VeroMagentaV™ or VeroYellowV™ • Tango™ and Agilus30™ product families made of flexible material • Transparent VeroClear™, digital materials: Unlimited choice of composite material, e.g. B.: • More than 500,000 colors • Material to reproduce soft tissue in various Shore A hardness levels • Transparent shades • Composite materi ...

When 3D printing with GDP, the object is immediately cured using UV light, resulting in a high printing speed., Massivit is known for its large format 3D printers, which are particularly suitable for retail marketing, entertainment, event planning and architecture., Applications for which the Massivit 1500 is particularly suitable:, 1. Retail Marketing and Decoration: With the Massivit 1500, companies can create customized and elaborate window displays, POS displays and in-store decorations., 2. Event and exhibition design: For event and exhibition designers, the Massivit 1500 offers the opportunity to create personalized and interactive elements that can attract visitors and enhance the event experience., 3. Architecture and model making: The Massivit 1500 can be used to create detailed architectural models that can be used for presentations and to visualize projects., 4. Large prototyp ...

Mark Two in great condition, like new with the following accessories:, Equipment:, 2x Onyx FFF filament - 800 cm³ spool, 3x Precise PLA FFF filament - 600 cm³ spool, 1x Cleaning Rod Precise PLA (Desktop and X-Series), 1x carbon fiber CFF filament - 50 cm³ spool, 1x Kevlar CFF filament - 50 cm³ spool, 1x fiberglass CFF filament - 50 cm³ spool, 1x HSHT glass fiber CFF filament - 50 cm³ spool, 1x dry box for material storage Compact (desktop and X-series), Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass), ...

Formlabs Form 3L Wholesome Package including Form Wash L and Form Cure L. All devices have been running for a very short time: approx. 50 hours. Year of manufacture 2022, commissioning October 2022. Accessories: 2L each of Resin Tough 2000, High Temp, Rigid 10K and a separate tank for each type of resin., Installation space in mm (x/y/z): 335x200x300, Layer thickness: 25-300 microns, laser power: 2x 250 mW, Resin refill automatically or manually: Automatically, size of laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60Hz, 650W, network connection: Wi-Fi (2.4, 5GHz), Ethernet (1000Mbit), USB 2.0, Resin refilling automatic or manual: Automatically, Size laser spot: 85 microns, Size laser spot: 85 microns, Machine dimensions in mm (w x d x h): 775x520x735, Weight in kg: 48, Power supply: 100-240VAC, 7.5A, 50/60H ...

For sale is a ProJet 2500Plus from 2017. The device is in perfect condition, test printing is possible (for an expense allowance, which will be offset against purchase)., Accessories: EasyClean System from 3D Systems, second build platform, Technology: MultiJet Printing

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed build material less than 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400, ...

For sale here is a 3D printer from the BigRep model Studio G1. This machine is a showroom device and will be serviced by the specialist dealer before delivery. The software is Blade from the manufacturer BigRep, which is closely based on the well-known Cura., operating hours: few, Installation: 2017, Installation space in mm (x/y/z): 1000x500x500, software: BigRep Blade, network connection: USB / Network, support material: Compatible with all common third-party filaments , Layer thickness: 0.1mm 0.4mm, number of nozzles: 2, extruder units: Fiber-Ready Dual-Extruder, print bed temperature in °Celsius: Max. 100°C, Weight in kg: approx. 600KG, Power supply: 208 V – 240V, 16A, 50/60Hz, Print bed temperature in °Celsius: Max. 100°C, security certification: CE approval, building material: BigRep ASA, BigRep ABS, BigRep BVOH, BigRep HI-TEMP, BigRep HI-TEMP CF, BigRep PA6/66, Bi ...

Well-maintained Mark Two 3D printer in good condition for sale. Running time: 4015 hours or 556 prints., Equipment:, - some remaining materials can be purchased additionally (expiration date expires), 1 piece dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Nylon PA6, endless fibers: Carbon;Fiberglass;Kevlar;HSHT Fiberglass (High-Strength High-Temperature Fiberglass), network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diamet ...

We are selling this chemical smoothing machine from AMT Technologies on behalf of a customer. AMTs PostPro3D technology is an intelligent and automated post-processing solution for smoothing 3D printed parts made of thermoplastic polymer. PostPro3D achieves a high-quality surface finish equivalent to injection molding techniques using 3D printing processes. This technology reduces lead time, manufacturing costs, and operating and maintenance costs and represents the missing piece in the digital manufacturing chain. The PostPro3D machine makes surface finishing of 3D parts fast and cost-effective for high volume production., Process chamber dimensions: 410mm × 610mm × 400mm, Volume of consumption containers: 15,400cm3, Process chamber temperature: Maximum 70°C, Dimensions machine unpacked: 1826mm × 1388mm × 1380mm, Cooler dimensions: 715mm × 945mm × 1492mm, Dimensions ...

We are selling a large-capacity 3D printer X1000 from German RepRap GmbH. The device is in good condition and has been serviced by Innovatiq., Scope of delivery:, - 1 pc. 3D printer X1000, - Small parts and remaining consumables, Installation space in mm (x/y/z): 1000 x 800 x 600 mm, build speed: 10 – 150 mm/s, Travel speed: 10 – 300mm/s, Layer thickness: 0.02mm, Filament diameter: 1,75 mm, Nozzle diameter: 0.4mm / 0.6mm / 0.8mm, extruder units: DD3 Dual, Extruder temperature: max.290°C, Print bed technology: Heatable up to 120°C, Data transfer/network: LC touch display, wireless printing via WLAN, Ethernet, software: Simplify3D Software, Power consumption: (max.) 2.5kW, approx. 30% in continuous operation, Power connection: Three-phase current 400V (CEE 3L+N+PE), 16 A, Dimensions in mm (w x h x d): 1725 x 1500 x 1320 mm, Weight in kg: 400 kg

On behalf of a customer, we are selling an HP JetFusion 3D printer as a spare parts carrier., Included:, - 22x 4KG PA12 (NEW), - 3x Fusing agent, - 6x Detailing agent, - 1x Bright Fusing, - 1x SERV ASSY-MCB-V5 PN: M2K85-67391, - 1x SERV ASSY-CABLE-PEN CARRIAGE POS CHE PN: M2K85-67388, - 1x SERV ASSY RELAY CONTROL PCB PN: M2K85-67103, - 1x SERV ASSY-PCA-CLEAN AIR PN: M2K86-67235, - 1x SERV ASSY ECHAIN v2 PN: M2K85-67298, - 1x SERV ASSY PLATFORM SEALS PN: M2K86-67024, - 2x SERV ASSY-EXHAUST HOSE / Extraction hose PN: M2K86-67073, - 1x SERV ASSY-FUSING CARRIAGE DRVE PN: M2K83-67007, - 1x SERV ASSY CABLES BUCKET PN: M2K85-67175, - 1x SERV ASSY-EXHAUST FAN BUNDLE PN: M2K85-67263, - 1x Air Exhaust Filter PN: 8WA29A, - 1x SERV ASSY-ADS CHAIN-V2 PN: M2K86-67289, technology: HP Multi Jet Fusion Technology, Effective construction volume: Up to 332 × 190 × 248 mm, build speed: 2,199 cm 3 /hou ...

On behalf of a customer, we are selling a 3D Systems MultiJetPrinter type ProJet 2500Plus in very good condition. The machine was used as a dealer demo machine., The machine has been equipped with new drive belts and new filters. All materials have been removed according to the manufacturers instructions. The machine is empty. The printing time is approx. 1400 hours, 181,000 layers were printed with approx. 24KG of building material and approx. 33KG of support material., Equipment:, - 3D Sprint Basic Complimentary Software (on-line activation), Installation: 2016, Print modes: HD - High Definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on printing parameters, ...

3D printer Onyx Pro from Markforged in very good condition with the following accessories:, Equipment:, 4x Onyx FFF Filament, OVP, 1x Onyx FFF filament opened, stored in dry box, 1x Glass fiber CFF filament opened, stored in the printer, 5x PLA, OVP, 1x dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Precise PLA, Smooth TPU, endless fibers: Fiberglass, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diameter: FFF nozzle  ...

On behalf of a customer, we are selling a Stratasys F370 FDM 3D printer in good, well-maintained condition. Slight signs of wear on the housing (see photos). Last service carried out by Alphacam in 2024. Actual printing time approx. 6,000 hours., Stratasys F370 Accessories:, - 9 Build Trays, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: PLA, ABS, ASA, TPU92A, ABS-ESD7, PC-ABS, ABS-CF10, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing technology: FDM - Fused Deposition Modelling, number of nozzles: 2, Nozzle diameter: T14 (0.3556mm), Layer thickness: minimum 0.127mm, operating hours: ap ...

This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.

This Krauss Maffei 2300-12000 MC plastic processing machine was manufactured in 2002. Featuring a robust 105 mm screw diameter and an impressive injection shot weight of 4727 g/PS, it ensures high-quality production. The machine offers a closing pressure of 2300 kN and a mold opening stroke of up to 2600 mm, suitable for large-scale manufacturing. A great opportunity to buy this Krauss Maffei 2300-12000 MC plastic processing machine. Contact us for further details regarding this plastic processing machine.

This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information.

90 EXTRUDER 200/600 KG CAPACITY WITH PLC

Manufacturer: Kraftanlagen Heidelberg Machine type: KK 75 FW Year of Make: 1990, 2018 Renewal 2018 Control & safety technology renewed Specifications: Roller arrangement: «F» Number of rollers: 4 Roller width: 2500 mm Roller bale diameter: 750 mm Drive power roller 1-4: 98 kW Roller speed: 2.5 – 50 m/min Roll gap adjustment: cylindrical worm gear Roller heating: hot water Plant control: Retrofit 2018 - LAE Engineering The calender line is offered, if you are interested with the Buss kneaders, including unwinding, calender rolling mill and winding. The calender was used for the production of homogeneous and reinforced PVC-P waterproofing films. Ongoing investments made in recent years. Among other things: 2018 Retrofit of the entire control technology line (excluding winders) 2018 Investment in safety equipment 2018 Investment in exhaust air 2019 Edge cutt ...

Description TURBO MIXING SYSTEM Turbo Mixer BFT 700 Horizontal cooler BFC 2500 Liquid additives scale

Description

Description including: 1 robot STAUBLI RX 160 2 flat conveyor belts 1 inclined conveyor belt with metal detector 1 PALBASE crusher, year 2018, XR3265 1 inclined conveyor belt for evacuation of parts 10 meters 1 suction hopper1 flat conveyor belt 1 flat and inclinedconveyor belt 12 meters 2 inclined conveyor belts 8 meters 1 flat conveyor belt 15 meters