Manufacturer:
(Category: 308)
The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Year of Make: 2019 Machine in good condition and ready for immediate use!
Uniloy Milacron AQS2-810 PDR SGS Uniloy Leakage Control (2014)8-head, side-shift, high-throughput leak tester designed for continuous inline inspection of HDPE/PP bottles.Featuring BMC Controls AQS2-810 ConveyorApplications: HDPE dairy bottles, juice bottles, household chemical bottles, personal-care bottles, and any blow-molded container requiring high-speed leak verification Auction-ID: A1-48805-106
Current consumption 16 A, heating capacity 9 kW, medium water, heating temperature 100/120 °C, filling volume 6 l Auction-ID: A1-49516-4
Current consumption 13 A, total power 8.5 kW, medium water, temperature range up to 180 °C, filling volume 1 l, max. flow rate 40 l/min, system pressure 14 bar Auction-ID: A1-49516-5
Uniloy Milacron RTM 4 Uniloy Trimmer (2012) Auction-ID: A1-48805-90
For sale is a molding machine, manufacturer Erlenbach, type EHV-C 120/670.The machine is in good condition and can be viewed under power by appointment
For sale is a Kurtz automatic molding machine of the type A-Line, built in 2010, The machine is equipped with a tool for EPS plates and a manipulator. The condition is very good and can be visited under power by prior appointment.
DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE
Breaking capacity: 8kA, power supply: 400V, 50Hz, connected load: 5500VA, weight: 95kg. An on-site inspection is possible.
saw-blade dia.: 250 mmturning speeds: 2800 U/minpressure: 6-7 barweight of the machine ca.: 273 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SACMI complete line for crown cork caps. Pry-off 913 type(PVC-free). Includes press PTC110, lining PM1200, two magnet elevators, silo, separator, automatic counter, chiller.
Roller conveyor diameter: 50x200mm, roller shutter box support stroke electrohydraulically adjustable: 180mm, length: 2600mm, width: 2800mm, height: 900-3100mm. Equipment: roller shutter box support electrohydraulically adjustable, 6 dimension memories, pneumatically swivelling horizontal-vertical with 2 cylinders, weather bar recess, adjustment of the roller shutter box support with memory function, 6 dimension memories, with digital display, working depth is motor-adjustable and fixed from 450-2600mm, manually foldable, support sliding profile. An on-site inspection is possible.
- Designed for the automatic trimming of molded parts intended for the automotive industry. - Suitable for components made of natural fibres, non-woven materials and composites. - Thermal cutting system using a hot blade for contour finishing and burr removal. - Total installed power 6.00 kW. - Engine power 1.40 kW. - Automatic work table with fixing of the piece. - Integrated fume extraction system. - Work table with tools for positioning the piece. - Photoelectric safety barriers in the cargo area. - Control via SIEMENS SIMATIC PANEL display. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. - Operating conditions of this item: unchecked. Auction-ID: A7-48840-44
X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible.
Moretto 10P03S53 Manifold Plate (2014) + Moretto TLC 05S3 FRAME Colour Dosing SystemMoretto 10P03S53 Manifold Plate (2014)Moretto TLC 05S3 FRAMELogic ServerIncludes 3 color stations Auction-ID: A1-48805-98
Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Drive motor: 5.5 kW -Inlet cross-section: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg
Fine impact mill, hammer mill, pin mill, pulverizer, auxiliary mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator, plastic shredder, crusher, plastic rolling mill, plastic cutting mill -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg
Fine impact mill, hammer mill, pin mill, pulverizer, auxiliary mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator, plastic shredder, crusher, plastic rolling mill, plastic cutting mill -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg
A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible.
- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm
- technically efficient, ready to work – after full service - adjustable leg height - working length: 3500 mm - roller width: 240 mm - measurement reading scale - manually adjustable stop + locking lever
Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips
Year: 2006 - technically efficient, ready to work – after full service - screwdriver - automatic screw feeding system - tilting table top - fittings punch (straight cut)
Year: 2014 - technically efficient, ready to work – after full service - working dimensions: 2750 x 1300 mm - tilting stop pins - pneumatically tilted - sliding/brush strips
A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment.
A hydraulic three-roll mill Lehmann for fine grinding, dispersing and homogenizing is available. Working width: 600mm, roll diameter: 300mm, weight: approx. 1900kg. Including electrical control cabinet and accessories. Documentation available. An on-site inspection is possible.
A Scheugenpflug material preparation and feeding unit is available. Two-component Scheugenpflug LiquiPrep LP804 20/20 machine, year of manufacture: 2023, tank volume: 50l/20l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2050mm, weight: approx. 430kg, operating hours: 0h. The machine is as new and still in its original packaging. Documentation available. An on-site inspection is possible.
2.000 € 
