Производитель:
(Категория: 308)
The boogie heart furnace consists of two charging cars mounted on rails, a main frame with insulation, a post-combustion chamber, and a forced-air cooling system. Rated voltage 3/N/PE 400/230 V AC 50 HzConnected power 220.8 kVARated power 160 kWMax. current 232 AInternal usable dimensions (W/H/D) 1500x1500x2100 mmIP40 protectionHeating power (nominal burner output) 12.5–50 kW (min/max)Max. furnace temperature - Tp max 1300 °COperating furnace temperature 1200 °CFuel: natural gas (calorific value 10.35 kWh/m³) More technical details in attached pdf. Upon agreement with the buyer, the seller may offer, for an additional fee, the dismantling of the equipment, loading, transport, and commissioning at the buyer’s site. Auction-ID: A7-40554-10
Использовал машину для скрининга, проверенный по функционалу, сразу доступен
Основные машины в линейке: смеситель жидкости Trusioma горячий и холодный КО-ТЕСТОМЕСИЛЬНАЯ МАШИНА Мельница смесительная Бузулук 660х2100 мм 4-х валковый каландр Buzuluk 700x1800 мм, перевернутый "L" Темперирующее и растягивающее устройство за каландром – роликовая дорожка Прибор для измерения профиля толщины пленки Устройство намотк
Сушилка / Центробежная сушилка / Химчистка Может использоваться для предварительно измельченных пластиковых отходов (твердый пластик, пленки), Производительность в зависимости от типа материала ок. 0,5-2 т/ч Мощность привода 30 кВ
Конвейерная лента / конвейер Ширина пояса: приблизительно. 300 мм Расстояние оси: около 3130 мм Привод: 0,75 кВт новый - только очень короткий в использовани
Конвейерная лента / конвейер Ширина пояса: приблизительно. 1400 мм Расстояние оси: приблизительно. 8000 мм Привод: 2,2 кВт
FAS BWU 1100 BAG MAKER, Maximum air pressure: 600 kPa, Maximum sealed tape width: 1,060 mm, Bag length: 600 – 3,000 mm, Machine speed: 20 – 100 m/min, Maximum 160 cycles/min, Installed power: 5 kW, Maximum main roll diameter: 800 mm, Weight: 2,540 kg, Used for garbage bag, see also ref. [GEER101](.germanplast/listings/9111205-used-2017-fas-bwu-1100-garbage -bag-maker), availability: immediate, working width: 1000 mm, conditions: good
FAS BWU 1100 BAG MAKER, Maximum air pressure: 600 kPa, Maximum sealed tape width: 1.060 mm, Bag length: 600 – 3,000 mm, Machine speed: 20 – 100 m/min, Maximum 160 cycles/min, Installed power: 5 kW, Maximum main roll diameter: 800 mm, Weight: 2,540 kg, Used for garbage bag, see also ref. [GEER100](.germanplast/listings/9111190-used-2015-fas-bwu-1100-garbage -bag-maker), availability: immediate, working width: 1.000, conditions: good
air pressure:8 bar Air consumption:NI 18 l/min.weight:110 kgdimensions of the machine ca.:700 x 300 x 1000 mm
Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.
Год: 2006 - технически эффективный, готовый к работе — после полного обслуживания - Лимит вспышки: 2 мм - Диапазон угла: 30-180 градусов - большой обогреватель - боковые опоры - Станция подготовки воздуха
3DGence INDUSTRY F421 â Industrial FFF printer for high-performance polymers | Used, Used industrial 3D printer for PEEK, ULTEMâ¢, PEKK and other high-performance materials, The 3DGence INDUSTRY F421 is one of the most powerful FFF industrial 3D printers for demanding high-temperature polymers. With a heated chamber up to 195 °C, print head temperatures up to 500 °C and a large build volume of 380 à 380 à 420 mm, it is designed for use in medicine, aviation, automotive, and industrial manufacturing., Technical specifications, - Manufacturer: 3DGence, - Model: INDUSTRY F421, - Technology: FFF (Fused Filament Fabrication), - Condition: Used, - Commissioning: March 2024, - Estimated operating hours: approx. 3,000 h, - Estimated filament consumption: about 15 km, - Volume: 380 à 380 à 420 mm (60.648 cm³), - Layer resolution (min.): 50 µm, - Print heads: double ...
We are selling on behalf of the customer a Stratasys F170. The machine is generally in good condition except for one print head (ABS). The PLA and QSR support head work flawlessly., Stratasys F170 accessories:, - 16x Build-Trays (P/N 333-00302), - 1x PLA Natural Translucent (P/N 333-601319 with datecode 22.02.17, - 1x PLA Light Gray (P/N 333-60109) with date code 07.04.17, - 1x ABS Ivory (P/N 333-60300) with datecode 19.05.21, - 3x ABS Black (P/N 333-60301) with date code 28.05.25, - 1x ABS Red (P/N 333-60303) with date code 05.07.21, - 1x ASA Ivory (P/N 333-60500) with date code 13.03.17, - 2x QSR-Support (P/N 333-63500) with datecode 19.05.25, network connection: LAN (Ethernet), W-LAN, software: GrabCad Print (Download), GrabCAD Print Pro (available from the manufacturer), Installation space (x,y,z): 254 x 254 x 254, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (only ...
Техническое описание Ламинатор для отделки фольгой. Ламинирование без растворителей. Фольга _Folie, Алу-фольга, Ширина цилиндра 1310 мм Ширина ламинирования 1300 мм Тип ламинатора = дуплекс Диаметр размотки = 850 мм (турникет) Диаметр перемотки = 850 мм (турникет) Рукав 3 и 6 дюймов, Максимальная скорость = 450 м/мин. С аксессуарами
URBAN AKS 3950 сварочный аппарат с двумя головками - очень хорошее состояние - почти не используется, в идеальном состоянии
Make: Digicolor Type: Dry Air Hopper Dryer Model: DWE 50/100T Year: 2017 Manufacturer: Digicolor, Herford Germany Technical data: - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 5.5 kW - Current: 16 A - Hopper capacity: approx. 100 liters Equipment: - Stainless steel drying hopper with inspection window - Integrated dry air system (drywell) - Digital control panel with temperature display - Material conveying hoses - Mobile base frame with castors - Main switch and signal light Application: - Drying of plastic granulates in injection moulding processes - Suitable for continuous material conditioning Condition: Used Auction-ID: A7-45993-45
Type: Industrial mould temperature controller / oil temperature control unit Brand: Tool-Temp Model: TT-230 Controller: MP-694 microprocessor controller Medium: Thermal oil circulation Temperature range: Up to 230°C Display: Digital temperature display and status indicators Functions: Heating, circulation pump control, vacuum and mould drain functions Construction: Mobile floor-standing steel cabinet on casters Manufacturer: Tool-Temp AG, Switzerland Condition: Used Auction-ID: A7-45993-159
Make: PIOVAN Type: Industrial Temperature Control Unit (Chiller / Thermoregulator) Model: THN120 Specifications: ECNK Year: 2003 Voltage: 400 V Frequency: 50 Hz Power: 12 kW Machine type: - Industrial water temperature controller / chiller - Used in plastic processing (injection moulding, extrusion, etc.) Control: - Digital control panel with display - Temperature setting and monitoring - Status indicators: Run, Alarm, Heating, Cooling Connections: - Water inlet/outlet connections - Industrial hose fittings installed Features: - Integrated cooling and heating system - Compact standalone unit - Main power isolator switch Application: - Temperature regulation of moulds and industrial processes - Cooling/heating circuits in plastic processing lines Condition: Used Auction-ID: A7-45993-31
Make: Digicolor Type: Dry Air Dryer / Hopper Dryer Model: DWE 50/100T Year: 2017 Manufacturer: Digicolor, Herford Germany Technical data: - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 5,500 W - Current: 16 A Equipment: - Stainless steel drying hopper - Integrated dry air system (drywell) - Digital temperature control display - Material suction / conveying hoses - Inspection window - Mobile frame with castors Application: - Drying of plastic granulates prior to processing - Injection moulding / extrusion support equipment Condition: Used Auction-ID: A7-45993-44
Type: Water / oil thermoregulator unit Brand: Frigomeccanica Industriale S.p.A. Model: VR Type designation: 4 PRESS Year: 2003 Temperature control: Digital temperature controller Medium: Water / thermal oil Construction: Mobile steel cabinet on casters Features: Pump operating indication, resistance operating indication, thermal pump alarm, safety thermostat Pressure gauge: Integrated front-mounted manometer Main switch: Rotary isolator switch mounted on top front Manufacturer: Frigomeccanica Industriale S.p.A., Italy Auction-ID: A7-45993-160
Type: Industrial temperature control unit / mould temperature controller Brand: Boe-Therm Control: Digital temperature control panel Application: Heating and temperature regulation for moulds and industrial processes Design: Compact floor-standing unit on pallet base Connections: Integrated hose and fluid connection ports Cooling system: Forced air cooling with side ventilation openings Electrical supply: Industrial electric connection Condition: Used, with visible scratches, dust and operational wear Included: Unit exactly as shown with attached hoses/cables Auction-ID: A7-45993-158
Make: Wittmann Type: Material Dryer / Hopper Loader System Model: Drymax C30-100-PDC Year: 2005 Serial number: n/a Technical data: - Voltage: 3 x 400 V / 50 Hz - Power: 10.2 kVA - Current: 14.7 A - Hopper capacity: approx. 40 kg (marked M40) Equipment: - Stainless steel drying hopper - Wittmann Drymax drying unit - Feedmax material loader (vacuum loader) - Integrated control panel with temperature display - Vacuum conveying hoses - Mobile frame with wheels Condition: Used Auction-ID: A7-45993-56
Make: Wittmann Type: Material Dryer / Hopper Loader System Model: Drymax C30-100-PDC Year: 2005 Serial number:KX00000149 Technical data: - Voltage: 3 x 400 V / 50 Hz - Power: 10.2 kVA - Current: 14.7 A - Hopper capacity: max. 80 kg (marked) Equipment: - Stainless steel drying hopper - Wittmann Drymax drying unit - Feedmax vacuum loader - Integrated temperature control display - Vacuum conveying hoses - Mobile frame with castors Condition: Used Auction-ID: A7-45993-57
Type: Temperature control unit / mould temperature controller Manufacturer: Single Temperiertechnik Control type: Digital temperature controller with analogue adjustment dial Temperature range: 0 – 150 °C Functions: Heating / cooling / pump control Power supply: Industrial electric connection Housing: Mobile steel cabinet on castors Included: Connection hoses and cables as shown Condition: Used, signs of wear and workshop use visible Remarks: Sold as shown on pictures, functionality not tested Auction-ID: A7-45993-153
Продаётся предварительный экспандер под давлением EPS, производитель Dae Kong, тип DKF 3600, с подачей материала, сушилкой с проточным слоем, ситом, автоматическим контролем веса, контролем Siemen, Пропускная способность 20 г/л ---- 2000 кг 17 г/л -----1700 кг Предрасширитель в очень хорошем состоянии.
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg
Pellet dryer for plastic materials brand Aspiroplast model THD-200. Manufactured in 1997 (24/97). Approximate hopper capacity of 200 liters. Equipped with heating and ventilation system for the pre-drying of plastic raw materials. FOTEK automatic temperature control and integrated preheating timer. Installed power of 0.25 kW. Electric power supply 380 V. Suitable for drying materials such as PE, PP, PS, ABS, polycarbonate, nylon and PVC before the injection or extrusion process.Structure with insulated hopper, hot air fan and side level viewer. Used status. Measurements are approximate Auction-ID: A7-47333-9
Обозначение модели 700kN PELLETER Режимы работы Автоматический/Ручной Конфигурация: Одна станция Конструкция Автономная Направление нажатия Горизонтальное Автоматическая загрузка материалов Полуавтоматическая разгрузка материалов Диск Автономный Сила нажатия основной оперативной памяти (максимум) 700 кН | 70 тонн Сила нажатия на основную оперативную память (минимум) 70 кН | 7 тонн Ход основного удара (максимальный) 70 мм | 2,75 дюйма Max Hopper и ход штампа 184 мм | 7,25 дюйма Максимальная длина зап ...
BLS Lamination Press был перестроен с учётом ваших потребностей в ламинировании. Технические характеристики: Тоннаж: 20 тонн Максимальная температура: 150°C Электрический нагреваемый платен Размер стола: 600 мм x 600 мм Дневной свет: 425 мм Скорость открытия/закрытия: 10 мм/с Omron PLC HPU
6.500 € 
