beverage machines used for sale (2,670)

VELO flotation system PRI 100 for clarifying grape musts Capacity: 20.000l/h UNI-DEPP-KAR Manufacturer: VELO S.p.A. Type: PRI 100 Year of construction: 1998 Fabr.No. V6226 Capacity: 20.000l/h mobile with compressed air generator Measurements: Height: 2180 mm Length: 1500 mm Width: 1220 mm All the equipment s. photos

Eccentric screw pump with funnel Power: approx. 15-20m3 per hour Infinitely adjustable with adjustable motor Dimensions and weight: Length: 3100 mm Width: 820 mm Height: 1300 mm Engine data s. Photos

Two stainless steel tanks with drain. About 1500 l individual was sold

Double-tubing stainless steel tanks very stable quality. Suitable for cooling with a net content of 2500 l

1-channel rinser with 40 rinsing stations with safety housing running direction: right - left pitch: 127 mm

with 40 filling valves work directionl: left - right including safety housing and stainless steel enclosure

Self-cleaning centrifuge Alva Laval VNPX 410 SGD 34 for: -Juice -wine -beer

Sleever for PET bottles or tamper evident sleeves, made in 1997, with tunnel

- Standing glass cylinder - Without pressure reducing station for gas cylinder - Connections: 1 gas

One belt press EB 1004 EL Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 3390 x 1670x 1630 mm Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh water (connection f ...

Single Belt Press EB 1004 Capacity: 2500 kg/h Technical specifications: Maximum hourly output: 2500 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1670x 1680 mm Weight: 1340 kg Benefits: • Easy to operate and to clean • Automatic, continuous operation • Turnkey machine • Open and clear construction • Good accessibility for cleaning and maintenance • Very low maintenance effort required • Adjustable feet (moveable version also available) • Made of stainless steel and plastic that is approved to come into contact with food • High quality pneumatic and electrical components • Infinitely variable belt speed and pressing power • Pneumatic belt tensioning and belt control • High pressure filter belt cleaning with fresh wate ...

One belt press EB 804 Capacity: 1850 kg/h Technical specifications: Maximum hourly output: 1850 kg/h Belt width: 800 mm Electrical connection data: 400V /16A/ 1,1 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2700 x 1470x 1680 mm Weight: 1270 kg

One belt press EBK 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 790 kg

One belt press press EBS 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 850 kg

One belt press EW 1050 Capacity: 900 kg/h Technical specifications: Maximum hourly output: 900 kg/h Belt width: 1000 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1490 x 1465 mm Weight: 600 kg

Technical specifications: Maximum hourly output: 500 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/0,18 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions:: L x W x H: 1160 x 1090 x 1465 mm Weight: 460 kg

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Used Heuft Glass Empty Bottle Inspector InLine reflexx Device No. 2ZG042943 Condition: very good, ready for use at short notice ·       Original delivery date 12.2011 ·       Power max. 46,000 fl./h ·       Pass direction from left to right ·       Two triggers ·       Secomak blower instead of compressed air ·       Transponder detection for RFID test bottles ·       Discharge monitoring ·       Network Heuft Hlan (Upgrade Optional) ·       Hayt two ways discharge Delta K to the right ·       4 Variety Licenses ·       Tripartite Delta K for band height of 1130 ·       Two fluids for lye detection Not available! ·       inlet control, must be supplemented if necessary ·       Thread edging, must be supplemented if required ·       The documentation is complet ...

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

Labelling machine Krones Vinetta Y.O.M. 1994, li-re, 6 plates, 1 wet glue unit, Ma. no. 721-536, container 0.7 L VdF hull, 1.0 L VdF fuselage + chest, 0.2 L VdF fuselage. Machine can be visited on site. Age-appropriate condition.

capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning

Storage for wine, beer, sparkling wine, water, fruit juices, fats, oils, etc. Content: 60 litres Dimensions and weight: Ges.Height: 760 mm Diameter: 370 mm Weight: 40 kg Material: V2A - AISI 304, 1.4301 Surface: Inside and outside 2B=III C Tank top: with manhole round DN 230 with 1 x handle Underbody: with residual drain with disc valve DN 25

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Modular station Krones Contiroll HS

with 16 filling valves and 1-head aluminium screw capperfor 28 mm closures capacity: approx. 2,000 fl./h running direction: left - right product: Juice (hot filling) with stainless steel control cabinet

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

Traypacker Transnova

Dimac packing machine Capacity: 35 packages / min, shrink film. After major renovation, technical condition like new