We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 706)
used
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
used
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
used
1 of used trayshrinkpacker, make Kisters (KHS), type 97/50. Built 1987 with new controls (Siemens S7, Rexroth servos) fitted in 2012. Originally used to pack the following loose beverage cans as 6x4-24 on tray with film: standard diameter 66 mm and sleek diameter 58 mm at a speed 50 trays/minute (splitter pin collating), as well as slim 53 mm diameter cans at 25-35 trays/minute (gating type collating). Last used to pack various cardboard multipacks (roller-bolt collating) on tray with or without film. Operates from left to right as seen from operator's station.
used
Palletizer robot for depalletizing, make Kettner, type: Robogrip, with operating desk, control cabinet in s/s with Siemens Simatic S7 control, built 1999
used
Palletizer robot for palletizing, make Kettner, type: Robogrip, with operating desk, control cabinet in s/s with Siemens Simatic S7 control, built 1999
used
Sheet filter, make Schenk, type: 60x60, for about 30 hl/h, with stationary filter rack, with planetary gear, fit out with 59 filter plates in stainless steel, 2 endplates, with outside lying raising pipes, 2 sight glass armatures with pressure manometer, frame length: ~3,0m
used
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
used
Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm
used
Labeling machine, Fabr. Krones, type: Bonamatic, with 16 bottle plates, #Die machine was in a wine bottling Corresponding format parts are included in the offer# •Year of construction: 1993 • Speed: 12,000 B/h • 2 stations • 16 heads • Direction of rotation: Counterclockwise • many complete format parts are included in the offer see picture • Control: Siemens S5 • Security protection. • Machine dimensions: W=2.90m, L=2.50m, H=2.40m • Weight: 6.5t
used
Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2003 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.
used
Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2002 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.
used
Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards
used
KG dosing unit, Fabr. Schenk, Type: DA100, in stainless steel, with agitator with engine Bauer on top, standing on mobile feet
used
Mixer Falterbaum Typ Famix 20000 Capacity: 20.000 ltr./h year of manufaturing: 1992 with Bran & Lübbe dosing pump incl. switch board The machine is mounted on a stainless steel base plate
used
Crowner KOSME with 8 closing heads work direction: left to right year of manufacturing: 2013 capacity: 4.000 - 12.000 bph the machine will be complete recondition incl. - new electrical panel with Siemens frequency inverter - new safety housing
used
Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system
used
High pressure air compressor Belliss and Morcom High pressure air compressor Belliss and Morcom type: VH9H3N serial no. R188660 year of manufacturing: 2005 maximum working pressure: 40bar capacity: 580 m³ / h incl. pressure tank incl. cooling system / chiller
used
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
used
-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l
Saturator Alsim Carbo 20 Used saturator in very good condition with a capacity of 20,000 l/h
Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h
used
Saturator Alsim Carbo 20 Used saturator in very good condition with a capacity of 20,000 l/h
used
GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale
used
2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.
used
ZHF filtration system, Fabr. Filtrox, type: FOM 106 / 39, diatomaceous earth filter with horizontal sieves, for 100 - 120 hl/h, with Diatomaceous earth dosing unit, 1st commissioning in 1973, already removed and stored.
used
Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request
used
Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens
used
Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request
used
Several packers Joha in stock: GEP-034-ZW Packer, Fabr. Joha, type: diamond, 1 head, set up on 0.5 lt NRW and 0.33 lt longneck bottles in 20 NRW boxes, built in 1999. GEP-036-WN Packer, Fabr. Joha, type: diamond, 2-head, longitudinal, set up on 20 module box, with Siemens S5 control, YOC 1989 GEP-040-BS Packer, Fabr. Joha, Type: Diamant 2, 2-head, for 0.33 lt bottle and 0.5 lt bottle in box of 20, YOC 1995 Pictures and prices on request.
used
several unpackers, Joha Diamant in stock: CAP-033-ZW Unpacker, 1 head, set up on 0.5 lt NRW - + 0.33 lt Longneck in 20er NRW boxes, built in 1999 GAP-035-WN Unpacker, 2-head, longitudinal, set up on 20 module box, with Siemens S5, built in 1993 GAP-039-BS Unpacker, 2-head, for 0.33 lt and 0.5 lt bottle in box of 20, YOC 1995 Prices and details on request