1 VA agitator tank, heatable and coolable, insulated Total capacity: approx. 3,500 l Manufacturer: Ahlborn Dimensions: By. = 1.78 m / H with agitator = 4.10 m Connections: below: residual drain NW 80 G + clear drain NW 80 G (in frame below) sideways: Cooling jacket connectors input bottom NW 50 and output top NW 65 top: 2 x NW 40 with 2 spray heads / 1 x NW 65 G for filling nozzles / 1 ventilation dome with cover, drain channel and condensate pipe, through. 150 mm Lid: dome lid on top, lockable, diameter 455 mm Soil: slanted conical to the residual outlet Agitator: Stelzer agitator with adjustable gearbox with 2.2 kW at 10 - 50 rpm, type DRG6R / wavelength = 1,860 mm (on this seat 2 agitator blades with diameter 700 or 900 mm) Note: the tank was used to stir up silica - so the inner covering should be easily removed. In addition, the tank has some light pressure ...
Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order
FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.
2000-liter tank with agitator. The tank was used to dissolve sugar
2 VA agitator containers (formerly sour goods containers), insulated, free standing on 3 VA feet Brand: Georg Dorner Nuremberg Total content: approx. 1,600 l each Useful content: approx. 1,500 l each Built: 1984 approx. dimensions: By. outside = 1.30 m / through. inside = 1.19 m / H ges. = 2.20 m / T inside = 1.45 m Insulation: Outdoor insulation, rife at the bottom, thickness approx. 50 mm Agitator: Brand Turbo Müller Engine: 1,380 rpm / 0.55 kW, 380 volts, 0.5 ampere, insulator. Class B Shaft: stainless steel, through. 30 mm / L to approx. 200 mm above ground Wings: 2-winged, B ges. = approx. 130 mm Connections: 1 residual outlet NW 50 KM Heating: Containers are prepared for electric heating coil. Originally with heating coil, but all unfortunately damaged in improper removal Lid: good 1/3 foldable by hinge and handle / rest welded Alti ...
Intermix Type: EIÜD 4-C with Bran + Lübbe fine dosing pump 4-component mixer Power: 30,000 ltr./h
SATURATOR WITH NAGEMA KOMI 160 MIXER Mix saturator - new control cabinet with documentation. Technical condition: used, for technical inspection Capacity 960 l Capacity 16 000 l/h
3 VA agitator containers, free standing on 3 VA feet Content: 1,000 l each Brand: Black Apparatus Construction Years built: 1970 approx. dimensions per container: = 1.00 m / depth inside = 1.35 m / H ges. = 2.10 m Agitators: Brand Turbo-Müller KG (further data on request) Lid: 2/3 foldable Other: with CIP spray heads We reserve the right to make changes, error and intermediate sale. Payment conditions: 100% advance payment or cash upon collection. Delivery conditions: the price is valid from the location Maxhütte free truck charged, dispatch by forwarding agent is possible in Germany and abroad, exact additional costs on request.
Double-tubing stainless steel tanks very stable quality. Suitable for cooling with a net content of 2500 l
Cat No. 17-00156 in a very good condition Agitator TMR Type: SK 9042AF-132 M/4 TF TMR Turbo Misch Typ: SK 9042AF-132 M/4 TF I = 23.23 / H6 N1/n2 = 53 1/min Motordata: Type: SK 132M/4 50 Hz; 400 / 690 V; 14,8 /8,55 A; 7,5 kW ; 1445 1/min Measurements: Height: 2250 mm Width: 450 mm Length: 950 mm Length of the large wing: 540 mm Length of the smaller wing: 350 mm Weight: 600 kg available: 3 The price is for one unit.
Doppelwandiger Prozesstank 3000 Liter inkl. Agitator Tank überholt. Rührwerk überholt. Außengehäuse aus geschweißtem Edelstahl. Volumen: ±3000 Liter Rührwerk: 1,1 KW langsames Heckrührwerk. 10 U/min Mantel: Doppelmantel an Boden und Wand. Mannloch: 450MM Überholt: Ja vollständig, sehr guter Zustand. Lagerbestand: 3 Stück verfügbar CIP-reinigbar: Ja
Dubbelwandige procestank 3000 Liter inc. roerwerk. Tank gereviseerd. Roerwerk gereviseerd. Afgelaste rvs buitenmantel. Volume: ±3000 Liter Roerwerk: 1,1 KW traag hekroerwerk. 10 RPM Mantel: Dubbele mantel op bodem en wand. Mangat: 450 MM Gereviseerd: Ja volledig, uitstekende staat. Voorraad: 3 stuks beschikbaar CIP reinigbaar: Ja
Double-walled process tank 3000 liters inc. agitator Tank overhauled. Agitator overhauled. Welded stainless steel outer casing. Volume: ±3000 Liter Agitator: 1.1 KW slow stern agitator. 10 RPM Mantle: Double mantle on bottom and wall. Manhole: 450MM Overhauled: Yes fully, excellent condition. Stock: 3 pieces available CIP Cleanable: Yes
Cat.-No. 16-00155 in a very good condition Measurement and Weight: Total Length: 8200 mm Diameter: 1800 mm Weight: approx. 3500 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating temperature: 20°C Inspection book, Documentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness 10,5 mm, jacket wall thickness 8 mm. Top of the tank: • with 1 flange DN 25 Tank body: • with forward drawn manhole oval front 400 x 300 mm swiveling with holder • with pressure fitting with manometer, control valve, overpressure safety valve, connection DN 15 • with flange for sample valve DN 15 • with flange for clear outlet DN 50 with angle seat valve disc • with flange ...
Cat No. 16-00137 in a very good condition Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upper body: · filling connection DN 50 central in the upper bottom, 2 sleeves 3/8”, 1 flange piece NW 25, 1 flange connection NW 80 Tank body: · with ladder hook up · with Manhole oval 450 x 350 ...
3 VA agitator tanks, with slow-running gear agitator, marbled, free-standing on 3 VA feet, with 1/2 hinged VA lid Total capacity: approx. 1,480 litres each Connections: 1 residual outlet DN 32 G each with outlet pipe DN 32 KM pulled out over the edge of the container References outside = 1.22 m / diameter. inside = 1.16 m / H without agitator = 1.85 m / H with agitator = 2.37 m / T inside = 1.40 m Gear agitator: 146 rpm / motor 0.37 kW / motor remounted Shaft stainless steel: L = 1.35 m / diameter. = 20 mm Impeller: 4er flügel / Durchm. 320 mm / H = 65 mm Bottom: spherical Lid: 1/2 hinged (loose with groove), Note: there are a total of 4 lids available - 1 lid of it is original and fits, 3 lids are currently a bit too big (stand above: 2.5 / 3.0 / 5.0 cm) Internal number (Please specify for inquiries/orders): R09/015 We reserve the right to ma ...
