Manufacturer:
(Category: 101-1)
x-travel: 600 mmy-travel: 500 mmz-travel: 500 mmtotal power requirement: --- kWweight of the machine ca.: 9,6 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1200 mmy-travel: 600 mmz-travel: 630 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: 7700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: Sinumerik 840 D SL SiemensMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 83 / 57 Nmtension force: 8 kNwork table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - distance: 100 mmT-slot - width: 4x 14H12 / 1x 14H7 mmmax. table load: 600 kgtable height over floor: 720 mmdistance spindle nose and table: 120 - 580 mmTool-Presetter:: number of toolpositions: 30 pos.Max. mould width: 80 / (130) mmmax. tool length: 250 mmmax. tool weight: 6 kgmax. total weight: 80 kgchange-time tool to tool: 1,6 secchange-time chip to chip: 6,0 secfeeds:: rapid traverse: 30 m/minfeed speeds: 1 - 20.000 mm/minFeed force: max. 5 kNtotal power requirement: 28 kVAweight of the machine ca.: 3,8 tdimensions of the machine ca.: 3,5 x 4,0 ...
x-travel: 1100 mmy-travel: 610 mmz-travel: 610 mmcontrol: Heidenhain 530 total power requirement: kWweight of the machine ca.: 7800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmcontrol: iTNC 530 HeidenhainMain spindle:: power capacity - main spindel: 13 / 9 kWturning speed range - main spindle: 20 - 10.000 min/-1Torque: 83 / 57 Nmtool taper: SK 40 tension force: 10 kNwork table:: table surface area: 790 x 560 mmnumber of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mmT-slot - distance: 100 mmmax. table load: 600 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgTotal weight, approx.: max. 60 kgfeeds:: feed speeds: max. 20.000 mm/minFeed force: 5 kNinput unit: 0,01 mmrapid traverse: 30 m/mintotal power requirement: 20 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 4,5 x 4,0 x 2,8 mDocuments: Coolantsystem: high pressure coolant: 6 barChip con ...
x-travel: 1020 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain4. axiselectronical hand wheel20-fold automatic tool changerchip tankTechnische Daten / technical details:Verfahrweg X / X-Travel 1020 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 510 mmTischgröße / table size 1200x450 mmWerkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2100 mmy-travel: 1020 mmz-travel: 762 mmControl: Fanuc MXP-200FP spindle speed: 6000 U/minspindle capacity: ca. 22 kWmax. torque on the spindle: ca. 550 Nmtool taper: SK 50 table surface area: 2300 x 1020 mmmax. table load: 3000 kgT-slots: 6 x 22 mm T-slot - distance: 150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-Axis CNC Machining CenterEquipment/Accessories:- Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm- coolant system with internal coolant supply and filter- emulsion mist extraction- electronic handwheel- 2 pcs. magnetic clamping plates 800 x 400 mm- various tool tapers SK50- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 828 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 12000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 kWtool change unit: 30 Pos.total power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- Siemens 828D CNC control- Direct drive spindle: 12,000 rpm- Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper)- Oil cooling of the spindle head- Thermal compensation system (software)- Tool magazine: 30 tools- RENISHAW tool and workpiece probe- Internal cooling via the spindle centre: 12 bar- External cooling with air and cooling lubricant- Internal thread spindles + chip conveyor b ...
x-travel: 4500 mmy-travel: 800 mmz-travel: 600 mmcontrol: HEIDENHAIN iTNC 530rapid traverse: 30/40/40 m/mintable surface area: 5300 x 750 mmtable load: 4,5 ttool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/minspindle motor: 29 kWspindle distance: 325 - 925 mmtool piece magazine with: 30 Plätzentotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mequipped with:- CNC-Control Heidenhain iTNC 530- IKZ 20 bar- NC Swivable Table- Chip Conveyor- Coolant- Tool Changer 30-fold (SK 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- ULTIMAX 4 control- toolchanger for 24 tools- coolant through spindle- chip tank- electronical hand wheelTechnische Daten / technical details:Verfahrweg X / X-Travel 610 mmVerfahrweg Y / Y-Travel 510 mmVerfahrweg Z / Z-Travel 610 mmTischgröße / table size 760x510 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 fachEilgang / rapid feed 30 m/minGewicht der Maschine ca. / weight 4700 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of L ...
Control: NCT table-size: 700 x 500 mmcoolant: ja Tool bore: SK 50 2 clamping devices20-position tool changerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.060 mmy-travel: 610 mmz-travel: 610 mmcontrol: Winmax 9 (Upgrade)table-size: 1.270 x 610 mmmax. table load: 1.100 kgnumber of T-slots: 5 T-slot - width: 18 mmT-slot - distance: 100 mmturning speed range - milling: ~ 10.000 U/minpower capacity - milling spindle: 18 / 11 kWtool taper: SK 40 Tool changer: 24 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 120 mmmax. tool length: 300 mmmax. tool weight: 7 kgfeed: ~ 15,4 m/minrapid traverse X-axis: 30 m/minrapid traverse Y-axis: 30 m/minrapid traverse Z-axis: 20 m/minweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,5 x 3,2 x 3 mChip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - VerticalHURCO VMX 42The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 980 mmy-travel: 630 mmz-travel: 630 mmControl: iTNC 530 total power requirement: 10 / 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 442,5 mEquipment:Electronic handwheelOperating mode 4Manual swivel milling headMotor spindle 12,000 rpmSK 40 / Clamping DIN 6987232-position tool magazineRigid table 1250 x 700 mmChip conveyorCoolant deviceSpecial price for collection ex works / EXW foundation EXW D-63110 RodgauList price ex warehouseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode ...
x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...
x-travel: 2900 mmy-travel: 1000 mmz-travel: 700 mmcontrol: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mmy-travel: 785 mmz-travel: 600 mmcontrol: FANUC I-Series : : 12000 min/-1: 22/18,5 kWtool taper: BT 40 : 204 Nm: table surface area: 650 x 600 mmmax. table load: 600 kg: -120 / +120 °tool magazin:: : 40 pos.max. tool weight: 8 kgmax. tool diameter: 75 mmmax. tool-dia with free toolbox: 125 mmmax. workpiece length: 300 mmfeeds:: rapid traverse: 45 m/min: 4,5 kNmax. workpiece diameter: 840 mmworkpiece height max.: 500 mmtotal power requirement: kVAweight of the machine ca.: 14,5 tdimensions of the machine ca.: 3,7 x 2,5 x 3,1 m- CNC Control FANUC I-Series (F31i)- 5- Axis simultanous- Swivelling Rotary Tabe- Chip Conveyor- Coolant- ATC 40 (BT 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmcontrol: Sinumerik 840D spindle turning speed - stepless: 20 - 18.000 U/minpower capacity at 40 % load: 28,00 kWpower capacity at 100 % load: 19,00 kWmax. torque on the spindle: 121 / 82 Nmspindle taper: HSK-A63 B-axis: -10 - +180 °c-axis: 360 x 0,001 °feed X/Y/Z-axis: 20 - 10.000 mm/minrapid traverse X/Y/Z: 60,00 m/minfeed B-axis: 1 - 10.800 °/minrapid traverse B-axis: 30,00 U/minsize of pallet: 800 x 630 mmmax. workpiece diameter: 800 mmworkpiece height max.: 1.330 mmtable load: 1,20 ttoolpiece magazine: chain magazine: 180 Stücktool diameter: 80 mmtool diameter with 2 vacant positions: 160 mmtool length - max.: 450 mmweight of tools max.: 15,00 kgtotal power requirement: 57,00 kWweight of the machine ca.: 22,00 tdimensions of the machine ca.: 8,50 x 5,50 x H3,80 m5-axis-machining center with SIEMENS Sinumerik 840D powerline control, ...
x-travel: 2360 mmy-travel: 600 mmz-travel: 800 mmtotal power requirement: kWweight of the machine ca.: trequired space: 7.1x3.7x3.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mmy-travel: 400 mmz-travel: 400 mmcontrol: Heidenhain Mill Plus V600 total power requirement: kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1500 mmy-travel: 800 mmz-travel: 700 mmtable surface area: 1760 x 700 mmspindle taper: SK 40 spindle turning speed - stepless: 8000 U/minspindle drive: 15 kWfeeds: 1 - 8000 mm/minrapid traverse X/Y/Z axis: 15 / 15 / 12 m/mintable load: max. 2500 kgspindle throat: 760 mmATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 12,5 tdimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m- with coolant through spindleAccessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- geometrical overhauled in 2022 -- new ball bearing spindle installed on Y-axis in NOV. 2022 -- the magnetic plates shown on the photo are not included -The data for this ad was created with ModulMWS - the software solution o ...
x-travel: 3000 mmy-travel: 800 mmz-travel: 1100 mmtotal power requirement: kWweight of the machine ca.: 15 trequired space: 4x6x3.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mmy-travel: 1100 mmz-travel: 750 mmtotal power requirement: 71 kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 800 mmz-travel: 800 mmControl: HEIDENHAIN MillPlus IT workpiece height max.: 1.330 mmtool length - max.: 450 mmmax. workpiece diameter: 800 mmNc rotary table: : surface area: Ø 800 x 630 mm: 0,001 °workpiece weight max.: 1.200 kgWidth of t-slots: 5 x Gr.14 Distance between t-slots: 100 mmcenter hole: Ø50H6 mmUniversal Milling Head: - B-axis: stufenlos 180 °resolution: 0,001 °max. power ED 40 %: 28 kWSpeed range, stepless: 20 - 18.000 min-1tool taper: HSK-63 DIN 69893 Form A feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 60.000 mm/minrapid in X/Y/Z: 60.000 mm/mintool magazine: - Number of tool places: 120 Stworkpiece length: 450 mmweight of tools max.: 15 kgvoltage: 3x 400 Vconnected load: 64 kVAcontrol voltage: 24 VFuse: 100 Atotal connected load: 64 KVAOverall size: - Space requirement: ca. 4,5 x 4,6 x 3,4 mweight of the machine ca.: 17.000 kg•Eq ...
x-travel: 1.250 mmy-travel: 880 mmz-travel: 800 mmControl: HEIDENHAIN iTNC530 workpiece height max.: 1.230 mmmax. workpiece diameter: 1.250 mmNc rotary table: : numbers of pallets: 2 size of pallet: 1.000 x 800 mm: Ø 1.100 mmmax. table load: 1.000 kgc-axis: 360 x 0,001 °Universal Milling Head: - B-axis: + 180 / -7 ° - stufenlos resolution: 0,001 °max. power ED 40 %: 28 kWSpeed range, stepless: 20 - 18.000 min-1tool taper: HSK-63 DIN 69893 Form A feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/minrapid in X/Y/Z: 40.000 mm/mintool magazine: - Number of tool places: 60 Sttool taper: HSK-A63 voltage: 3x 400 Vconnected load: 58 kVAOverall size: - Space requirement: ca. 5,5 x 4,5 x 3,2 mweight of the machine ca.: 15.000 kg5-Axis Universal milling machine in a very sturdy design with NC rotary table, tool magazine and pallet changer, NC swivelling milling head (B-head) with ...
x-travel: 1.600 mmy-travel: 1.250 mmz-travel: 1.000 mmControl: HEIDENHAIN iTNC530 Nc rotary table: : surface area: Ø 1.500 x 1.250 mm: 0,001 °workpiece weight max.: 4.000 kgUniversal Milling Head: - B-axis: stufenlos + 180 / - 7 °resolution: 0,001 °max. power ED 40 %: 28 kWSpeed range, stepless: 20 - 18.000 min-1feed, rapid traverse:: - feeds x/y/z -stepless: 0 - 15.000 mm/minrapid in X/Y/Z: 60.000 mm/mintool magazine: - Number of tool places: 60 Sttool taper: HSK-63 DIN 69893 Form A voltage: 3 x 400 Voperating frequency: 50 HzOverall size: - Space requirement: ca. 8,8 x 8,8 x 3,5 mweight of the machine ca.: 35.000 kgVersatile 5-axis universal machining center with NC – Rotary table, tool magazine and large loading door at the front.• NC-swivelling milling head with 18,000 rpm motor spindle for 5 -axis simultaneous machining• 3D CNC - -Control HEIDENHAIN iTNC530• ...
x-travel: 550 mmy-travel: 320 mmz-travel: 420 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 765 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Mazatrol Matrix2-fold pallet changing deviceNC-swivel rotary table80-fold tool changerhigh pressure coolant through the spindle 20barchip conveyorTechnische Daten / technical details:Verfahrweg X / X-Travel 630 mmVerfahrweg Y / Y-Travel 765 mmVerfahrweg Z / Z-Travel 510 mmSchwenkbereich A-Achse / swivel range A-axis -120 - +30 °Drehbereich C-Achse / rotary range C-axis 360 °Tischgröße / table size 500x500 mmWerkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpmEilgang / rapid feed 50 m/minAnzahl der Werkzeugplätze / tool places in ATC 80 fach / foldAntriebsleistung Hauptantrieb / drive capacity main drive 26 kWGewicht der Maschine ca. / weight ...
x-travel: 1200 mmy-travel: 600 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- CNC control Heidenhain TNC426- swivable milling head (horizontal / vertical)- NC-rotary table (C-axis)- tool changer for 32 tools- chip conveyor- electronical hand wheel- coolant device (coolant through spindle device 20bar)Technische Daten / technical details:Verfahrweg X längs / X-Travel longitudinal 1200 mmVerfahrweg Y quer / Y-Travel cross 600 mmVerfahrweg Z vertikal / Z-Travel vertical 700 mmC-Achse Rundtisch / C-axis rotary table 360 °Fräskopf / milling head +-90 °Rundtischgröße / rotary table size 800 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich 2-stufig / spindle speed (2-steps) 20-6300 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 32 fachAntriebsleistung Spindel ...
x-travel: 1000 mmy-travel: 1000 mmz-travel: 950 mmControl: FANUC total power requirement: - - - kWweight of the machine ca.: - - - tdimensions of the machine ca.: - - - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
