saws wood used for sale (1,059)

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mmfully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg

Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50

Very good scratch conveyor 80/60/2x 5750 (total length 7m) engine 3 kW

EWD HDN/SV with width adjustment TOP ZUSTAND ! (1982/2009) WATER-CLOSED FUEHRS, SIDE BRETTERKAPPSAEGE... Through width 735 Passage shoe710 Hub 600 Speed max. 300 Feed speed 0-15 m/min Feed capacity 8.5 m/min Total weight 12 t SPALTKEIL ARTA C WITH SIDE WAREKAPPSAeGE Very well maintained facility little cut ! HDN-SV STATUS: VERY GOOD

1 piece scratch chain foerderer 650/500 mm (W/D) length 38 m; good

SAeGEWERKS MECHANIZATION MAYRHOFER IN TOP STATE Gate roller with pull-off with hydraulic lifting and vertical lyrical rollers with chain pull puller left and right with hydraulic unit and frequency roller gear 10 m long roll width 1.60 m table width 1.70 m roller drive electric SAFETY AT THE MACHINE PURCHASE NO good

EWD ESTERER HD_30 SVhigh in TOP ZUSTAND ! Repairs 2009, with powerPos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mmspeed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: rightpressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaetter, ...

Esterer DKV 1 movable shaft ! feed hydraulically hydraulic and electrically roller lift: hydraulic power: 55 kW Year construction year: approx. 1982 passage: 750mm = width, 160mm = height 2 x directional laser incl. approx. 15 Circularsaws including with Splitter unit screw roll; good

Length 7m, 6 pull-off chains, New condition!; as good as new

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

1 Post Saegeblaetter (8 Stueck) for Kaltenbach All Saegeblaetter either re-ground or Unused. 1 square diameter 560mm 5 stub diameter 500mm 2 square diameter 400mm Hole in the middle 50mm

Weibert S2 Format circular saw new Formatschiebetisch: 1600mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250 â 315 mm swivel: 90 °-45 ° WJ 700100 Options: Format table 1270 mm WJ-700101 Before scoring unit with motor 0, 75kW WJ 800105 Suction pipe with hose WJ 400104

Working diameter: 1600 mm 4 electric clamping

Best price 4600 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg

Best price 4150 Eur (EXW Jonava, Lithuania) Buying this machine, dust exhausting system HOLZMANN ABS 3880 only 320 Eur (EXW Jonava, Lithuania) or HOLZMANN ABS 2480 only 250 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2800x375mm Gross cut capacity- 2800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 2800x1000x1100mm Weight - 800 Kg

Best price 4500 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 3200x375mm Gross cut capacity- 3200mm Width of cut between saw blade and rip fence - 1250mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115 mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 Kw Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3200x1000x1100mm Weight - 850 Kg

Trenbandsäge Primultini 1100 with mechanization before and after the saw: -Task roller conveyor -Tilt table -Cross conveyor -Feed belt conveyor -Auszugsföderer -Drop link right -Repatriation -Board cross conveyor

Dimension of sliding table- 1600x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 650 kg Transport dimensions - 1800x1000x1200mm Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

FEEDING belt feed belt, conveyor belt for t, Posch, Hakki, BGU, splitting machine! Original version for woodworking! Do-it-yourself! DIRECT FROM THE MANUFACTURER! -New, open with mounted alligator connectors, 1-ply reinforced top cover, + bottom cover made of felt, antistatic (also from rubber-Supergrip profile available)! -Dimensions: length heavily 4.420 mm long x width 200 mm x 6 mm Item will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Endless connection on request. Additional versions, with pimples, Stollen or structured surfaces available. Not is your desired size? No problem! We customize for you! More transport and conveyor belts in all other sizes available immediately . We ship worldwide we deliver worldwide, please ask for shipping costs!

CONVEYOR BELT CONVEYOR BELT, FEED DIRECT FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -Stable conveyor belt / conveyor belt for many applications in industry, agriculture, wood u.v.m. with textile plies, coated on one side, underside of fabric! -New, endless welded, 2-ply reinforced, with Central wedge guide rail on the underside, grooved profile 8 mm x 12 mm wide! -Dimensions: 7480 mm x 300 mm width x thickness mm 2 with 26 piece PVC T studs 30 mm high x 240 mm long (edge distance 30 mm each), obliquely set, -Band will be shipped with UPS! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Not is your de ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

4 sides trimming line

Table dimensions: 940x560mm Be hem length: 3200 mm Dimensions Formatschiebeschlitten: 360x146x3200mm Max cutting height 90 ° / 45 ° with preliminary Ritz: 138 / 98 mm Max width of the lengths left by the saw blade: 3260 mm RIP fence cutting width: 1270 mm Blade angle: 90 °-45 ° maximum blade diameter with ago Ritz: 400 mm Before Ritz saw blade diameter: Ø 120 mm Rotation speed of main saw blade: 3500/5000 min-1 speed scoring sawblade: 9200 min-1 engine power 400 V / 50 Hz / S6 - 40%: 7 kW (9,5 HP) Engine power before Ritz: 0.55 (0.75 kW) Dust extraction outlet diameter: 120 mm AbsaugstutzenØ blade guard: 60 mm M-design: with electric height adjustment and tilting the saw unit G & pieces 5504756