subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness
Dissolver Agitator Geppert Mixing Technology SV 30 Power 0.55 kW Speed range 350-1500 1/min Switchboard with integrated FU mobile, mobile on castors Very good condition, straight from production
Dissolver Pendraulik Disperlux TD 200 EX protected design Power 1.5 kW Speed range 930-8400 1/min Very good ready-to-use condition, straight from production
Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.
Horizontal Mixer HM 2000 -Max. usable volume: approx. 1400 L -Product features: Pastes and liquids with low viscosity MACHINE DESCRIPTION: -Horizontal cylindrical mixing drum, front side screwed to drum or one side welded -Mixing tools welded to shaft as segment bucket -Bearing of the shaft in flange bearing housings arranged outside the mixer with roller bearings -Shaft sealing by easily replaceable gland packings and air flushing -Feeding via built-in nozzle with flange on fixed part of the lid or via lid opening -Emptying via outlet nozzle on the underside of the mixer, DN 150 -Inspection and cleaning via lid on the top of the mixer -continuous lids almost over the entire length of the mixer -Lid with safety lock -Intrusion protection below the lid with longitudinal bars Materials: -Mixing drum made of stainless steel 1.4306 -Mixer shaft made of stainless steel 1.4 ...
Powder disperser Manufacturer: Pierre Guérin Type: F2116 Machine No.: 9914350 Year of Manufacturing: 1989 Power: 2.2 kW very good condition with hopper (diameter: 610 mm; height: 500 mm) on a mobile stainless steel frame with control panel with power plug LWH: 1000 x 550 x 1410 mm
Powder disperser Manufacturer: Ytron Type: XC1/1/5.50-2 Machine No.: 03030247 very good condition with control cabinet and control system with hopper (diameter: 470 mm; height: 700 mm) on a mobile stainless steel frame LBH: 1050 x 500 x 1600 mm
Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm
Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm
Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...
Used milk centrifuge made by Spomasz, type: LWG-47 (Alfa Laval replacement). 6 pieces available.
Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW
Used LOOS DF 1000 steam boiler. Technical parameters: "WEM" type water treatment module water preparation module type "WSM-T 2.0" LOOS-DAMPFFIX steam generator type "DF 100010", new: 2006 total volume 110l max pressure 13Bar max temp 195 degrees Celsius 2,000L fuel oil tanks complete steam reduction station 10bar/4bar hot water preparation station with a 400l tank copper coil water treatment system
Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw
MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW
Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel
Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Processing plant Manufacturer: KORUMA Maschinenbau (Neuenburg) Year of construction: 1987 with processing vessel (diameter: approx. 300 mm) with 2 feed tanks, 1 of which is double-jacketed (diameter: approx. 150 mm each) with scraper agitator with sight glasses with temperature gauge with control cabinet & control mounted on a stainless steel frame very good condition LWH: 1100 x 750 x 1450 mm
Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, radiator, thermostat.
Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...
Used ATEX agitator RW0252800300 – 0.25 KW – 2800 rpm. For smaller containers and drums. ATEX II 2G EEx e II T3 Electric motor: Electric motor VEM motors Thurm GmbH, 0.25 KW, 2-pole, 3 x 230/400 volts, 2800 rpm, IP55. Weight approx. 8 kg. With motor protection plug. Iso F, suitable for frequency converters. Shaft: Precision stainless steel shaft D10, length 500mm, diameter 10mm, Material: Stainless steel 1.4301. With rigid coupling stainless steel 1.4571. Agitator: Double-bladed inclined blade stirrer, diameter 244mm, Material: Stainless steel 1.4571 With PTB-ATEX test certificate.
Used Glatt mixer for powders in bins. Type: Kontainer Mischer. Year of construction 1996. Leg spacing: 105 cm Paw length: 100 cm.
