subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
Rotary Vane Pump / Vane Pump PF037200 Electric motor 400 V, 0.37 KW, 1410 rpm Brass Rotary Vane Pump with Clamping Ring Pumping capacity litres per hour: 200 l/h, G 3/8"
Air Operated Diaphragm Pump by Flux Model : FDMX/M1 No.3656
Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3: Burkert T CUT Core UF200-125 075 3659 – 3.6 m x 80 pieces. Each membrane contains 19 filter tubes, i.e. these are AC19 membranes. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW
Manufacturer: PCM Type: Moineau 13L10 Nominal diameter: DN50 Flow rate: up to 13,000 l/h Operating pressure: up to 6 bar Incl. overhauled replacement pump (without motor)
Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity 25000 l/u. YOM: 2014 Equipped with 2 density meters, 4 electro-magnetic flowmeters and 3 flow control valves for measuring and controlling fat content in milk and cream. Including original documentation. Controls setup for centralised operation. Excellent condition.
Submersible Flygt 3201.091-9980003 Power: 30 kW / 400V Weight: 490 kg Individual sale possible
Jetstream mixer Manufacturer: Ystral Type: X50/10 (Multipurpose) Machine No.: 2379929 Year of Construction: 2007 with two interchangeable mixing tools infinitely variable speed up to 10,000 rpm on a mobile tripod (stainless steel) height-adjustable with hand crank LWH: 870 x 800 x 1700 mm
Sanding plant, coating plant used Manufacturer: unknown Type: Sanding width approx. 1500 mm 380 V Total dimensions approx. : 3250 x 2250 x 3000 mm The plant was used for sanding Eternit panels. Changes and errors in the technical data, specifications and prices as well as prior sale
Cooling tower with 950 kW cooling capacity, used as extruder cooling. Complete plant with water treatment, plate heat exchanger, switchgear, pumps. Cooling tower for outdoor installation in stainless steel with 2 fans of 15 kW each. Very energy-saving cooling system in mint condition. Due to relocation.
Agitator tank with 3800 l capacity. Container in stainless steel 1.4301. Agitator motor 11 kW, 98 rpm.
MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)
HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition
Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw
Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.
Jetstream Mixer Manufacturer: Ystral Type: X40/38-E mounted on tripod speed-controlled LWH: 600 x 400 x 1200 mm
Manufacturer: IKA Type: T50 EIS-TURRAX Power: 11,000 watts Speed-controlled: up to 10,000 rpm Swivel in a circular manner LWH: 400 x 400 x 1300 mm
Colloid Mill Manufacturer: Fryma Type: MZ 80/A Factory No.: M13063 Power: 2.2 kW Year of construction: 1987 Working room pressure: 1 bar very good condition with double jacket with outlet chute with pressure gauge LBH: 370 x 340 x 760 mm
Manufacturer: Probst & Class (PUC) Type: N/60/S Factory number: 84.016 Power: 2.2 kW with hopper Hopper volume: approx. 20 l LWH: 460 x 330 x 900 mm
Used self-cleaning disc centrifuge by VEB type SMZA71. New 1977. Capacity 20000 L. 4800 rpm.
Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...
Magnetic flow filter, MagnaClean CMX Nano, FL1-03-05010, Adey, new Special price The current price of a similar product is appr. € 3.000. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Residential and commercial magnetic flux filters for heating & cooling water. Treatment Maximum operating temperature: 150°C Maximum operating pressure: 10 bar Recommended flow rate: 30l/min to 225l/min The 316L stainless steel MagnaClean CMX filters offer adaptable, market-leading water system filtration and a fully flexible, customised approach to commercial and industrial heating and cooling water system requirements. 6 months warranty We give you 6 mo ...
Mill, Use Machine Type : B 315 U Manufacturer : Alpine Material : Mild steel
Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass
Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.
IBC container agitator 0.75 KW with worm gear motor i = 1 : 10 and inclined blade stirrer 244 mm With truss made of aluminum profiles 45 45 mm. Propulsion: worm gear motor, 3 x 230/400 volts, 2800 rpm, 0.75 kW, IP55, n²=280, Weight approx. 25 kg. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301 Coupling: Rigid coupling made of stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571 Sash adjustable angle
