used Heat exchangers for sale

UNUSED STAINLESS STEEL 316L 10 M2 AJA TUBULAR EXCHANGER REF.: C9088 Shell and tube heat exchanger manufactured by AJA in 316L stainless steel with an exchange surface of 10 m2. General characteristics: Manufactured by AJA Material Stainless steel 316L Year built 2007 Weight 310 kg Shell Tubes Test pressure 11,7 bar 9,8 bar Design pressure -1/+6 bar 6 bar Design temperature 200 ºC 100 ºC Volume 100 l 50 l Technical characteristics: Exchange surface 10 m2 Tubes passes 2 Casing passes 1 Nº tubes 70 ø tubes 19.05 mm Tubes length 1250 mm Casing diameter 368 mm

Heat Exchanger APV Scraped Surface VT+ 460 This heat exchanger has vertical cylinder type heat transfer surface where inner cylinder is polished surface cylinder fitted to base plate with a clamp. This cylinder is connected to under the base console mounted dasher gear motor and it has a dasher with two rows of scrapers. This tube heat exchanger is manufactured by APV Denmark in year 2005. The equipment is designed to operate with products containing up to 30 mm particles in various heating, cooling, chilling and sterilizing processes within dairy, food and other industries. All product touching parts are made of stainless steel EN 1.4404 (AISI 316L) or food quality plastics PEEK. Main structure is made of stainless steel EN 1.4304 (AISI 304). Heating / cooling media can be steam, hot water, cold water of chilled glycol-water solution. The scraper blades (PEEK) are fitted to the pin ...

Heat Exchanger APV Scraped Surface HSSE VT+ 422 This heat exchanger has vertical cylinder type heat transfer surface where inner cylinder is polished surface cylinder fitted to base plate with a clamp. This cylinder is connected to under the base console mounted dasher gear motor and it has a dasher with two rows of scrapers. The tube heat exchanger is manufactured by APV Denmark in year 2001. The equipment is designed to operate with products containing up to 30 mm particles in various heating, cooling, chilling and sterilizing processes within dairy, food and other industries. All product touching parts are made of stainless steel EN 1.4404 (AISI 316L) or food quality plastics PEEK. Main structure is made of stainless steel EN 1.4304 (AISI 304). Heating / cooling media can be steam, hot water, cold water of chilled glycol-water solution. The scraper blades (PEEK) are fitted to the ...

Shell and tube exchanger manufactured by BACHILLER in stainless steel with an exchange surface of 1.74 m2.

USED IRON 25 M2 BACHILLER TUBULAR EXCHANGER REF#: C9444 Tubular exchanger manufactured by BACHILLER with an exchange surface of 25 m2 General characteristics: Manufactured by BACHELOR Material Iron Year built 1996 Weight 4300 kg Shell Tubes Pression de conception 8 bar 8 bar Température de conception 300 ºC 180 ºC Test pression 20.7 bar 15 bar Volume 285 L 195 L Technical characteristics: Exchange surface 15 m2 Tubes passes 2 Casing passes 1

BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Top condition little in use BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT 10 -1KK Cooling capacity: 6.0 kW Cooling water consumption: approx. 17 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: max. + 30.0 °C Water outlet temperature: max + 35.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: approx. 40 litres Pump power (50Hz): 65 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC Total electr ...

BKW WATER/WATER HEAT EXCHANGER RWT596-TC160 Top condition little in use BKW WATER/WATER HEAT EXCHANGER RWT596-TC160 Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Dimensions: approx. Width :950 mm Depth :800 mm Height :1320 mm with a cooling capacity of 21.0kW for the following data: On-site cooling water circuit Inlet temperature :16°C Outlet temperature :20°C Throughput :75 l/min Operating pressure min/max :1.0 / 6.0 bar Pressure difference :min 0.4 bar Medium circuit Inlet temperature :25°C Outlet temperature :22.5°C Throughput :>20 l/min Operating pressure :max. 6 bar 1x plate heat exchanger in screwed version Operating pressure :max. 6 bar Plate material :1.4401 1x Water Buffer Tank Volume :120 Liters Cont ...

BKW WATER/WATER HEAT EXCHANGER RWT30-1KKP Top condition little in use Manufacturer: KÜMA – Apparatebau Gmbh&Co KG Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT30-1KKP Cooling capacity: 10.0 kW Connections: R3/4" IG Cooling water consumption: approx. 29.0 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: 27.0 °C Water outlet temperature: 25.0 °C Weight: 130 kg Filling capacity of the water tank: 40 liters Pump power (50Hz): 70 / 3.4 l/min / bar Pump power (50Hz-60Hz): 100 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC Total electrical connection: 1.3 / 2.5 kW / A Continu ...

No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg

Y.O.M.: 1986 No.: L11753 Pressure: 2 bar Heat transfer area: 0.7 m2 Scraper speed-controlled with pump, speed-controlled various extras Product space as good as new mobile with switchgear Dimensions LWH: 1550 x 700 x 1300 mm Weight: approx. 300 kg

Plate heat exchangers GEA NT150L B-10, 1491 kg, 356 l press content, year 2009, very good condition, max. 13 bar,.

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

Pfannenberg Heat Exchanger Air/Water / Heat exchanger air/water PWS 7502/1 230V U nom 1~ 230 V 50/60 Hz I nom max 1.3 A / 1.7 A I Start max 6.8 A / 6.6 A IP 65 Q 0 = 5.2 kW P max = 10 bar used Please pay attention to the photos Please look at the pictures. Important! Netto Gewicht / net weight: 35 Kg

Polycold by Brooks Automation, Inc. with less than 100 operating hours, the system has no longer been used, see pictures Type: PFC/PFC-1102 HC Built: 09/2011

Cooling unit for container RITTAL 4000W - 600€ per unit - practically new -Degree of protection: IP55 -operating temperature: between +1 °C and 70 °C -maximum cooling power: 4000W -internal circuit air flow: 925m³/h -Rated input power: 100W -Supply voltage: 230V -dimensions: 600x500x450 -weight: 30 kg The SK Rittal series consists of roof-mounted air/water heat exchangers for use in harsh environments and temperature ranges up to +70 °C. The air/water heat exchanger is mounted on the roof of the container using flexible water connection options. The total cooling power of the heat exchanger is 4 kW.

Air/water heat exchanger for cabinet SK 3374.140 – Rittal – 3374140: Operating voltage with AC 50 Hz 400 V, Operating voltage with AC 60 Hz 400 V, Type of AC voltage, Useful cooling capacity L35W10 400l/h 3000 W. Mounting Type: Integrated Operating voltage with AC 50 Hz: 400 V Operating voltage with AC 60 Hz: 400 V Voltage Type: AC Useful cooling capacity L35W10 400l/h: 3000 W

USED STAINLESS STEEL 1.75 M2 SEDITESA TUBULAR EXCHANGER REF.: C9226 Stainless steel heat exchanger manufactured by Seditesa General characteristics: Manufactured by SEDITESA Material Stainless steel Year built 2005 Shell Tubes Max. pressure allowed vacio / 10 bar vacio / 10 bar Max. temperature allowed -10 / +185 ºC -10 / +185 ºC Test pressure 16.2 bar 16.2 bar Volume 9.2 L 7.2 L Technical characteristics: Exchange surface 1.75 m2 Tubes passes 1 Casing passes 1 Nº tubes 24 ø tubes 16 Tubes length 1425 mm Casing diameter 130 mm

USED STAINLESS STEEL 1.75 M2 SEDITESA TUBULAR EXCHANGER REF.: C9226 Stainless steel heat exchanger manufactured by Seditesa General characteristics: Manufactured by SEDITESA Material Stainless steel Year built 2005 Shell Tubes Max. pressure allowed vacio / 10 bar vacio / 10 bar Max. temperature allowed -10 / +185 ºC -10 / +185 ºC Test pressure 16.2 bar 16.2 bar Volume 9.2 L 7.2 L Technical characteristics: Exchange surface 1.75 m2 Tubes passes 1 Casing passes 1 Nº tubes 24 ø tubes 16 Tubes length 1425 mm Casing diameter 130 mm

Stainless steel tube bundle heat exchanger Coat and pipes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature To the pipes: Pressure 13 bar Operating temperature 200 °C Content 33 litres In the pipes: Pressure 10 bar Operating temperature 120 °C Content 18 litres

USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm

TRANTER GX-026X141 Wärmetauscher / Heat Exchanger 141 plates unused / unused Please note the nameplate and the pictures of the article Please look also to the type plate and the pitures of the article Shipping weight: 540 kg Packing: 1 EURO pallet

Tranter GXD-64P261 Wärmetauscher / Heat Exchanger 261 plates Volume : 208 L Built: 2004 used / used Please note the nameplate and pictures of the article Please look also to the type plate and the pitures of the article Shipping Weight / Shipping Weight: 1,774 kg Packing: 1 pallet

Tube heat exchanger,stainless steel,with Ø 20 mm tubes,cabinet Ø 350 x L 2700 mm.

Plate heat exchanger,stainless acid proof steel,APV type H17,2 zones,30 + 122 plates.

Plate heat exchanger,stainless steel,APV/Pasilac N35,4 zones,33-87-41-12 plates.

Plate heat exchanger,stainless acid proof steel,APV H17,painted,edge-clamped,14 plates.

Plate heat exchanger,stainless steel,Alfa Laval type T5-MFG,16 clip plates.

Plate heat exchanger,stainless steel,Alfa Laval P22H-150-L,101 plates.

Plate heat exchanger,stainless steel,intermediate frame,for Sondex type 15-LS.

Plate heat exchanger,stainless steel,Pasilac type 1070,19 plates.

Plate heat exchanger,stainless steel,APV type SR36,92+92 plates,max. 10 bar.

Plate heat exchanger,stainless steel,APV type SR36,56+56 plates,max. 10 bar.

Plates,titanuim,for heat exchanger,GT45D6,G6732

Plate heat exhanger,stainless steel,Alfa Laval type P2-VL,mounted with 80 plates

Plate heat exchanger,stainless steel,APV type H17,10 bar,19 plates

Plate heat exchange,stainless steel,plates for Sondex type 15-LS.

Plate heat exchanger,stainless steel,Sondex type S15/1G,26 plates

Plate heat exchanger,stainless steel,Pasilac type RMG 1070,42 plates

Plate heat exchangher,stainless steel,Alfa Laval type P01,70 plates

Plate heat exchanger,stainless acid proof steel,APV type H17 RKS-10 no.2,73 plates

Immersion heater in housing,6000 W,Ø 90 x L 1130 mm.

Plate heat exchanger,stainless steel,APV type H17 R-6,29 plates

Plate heat exchanger,stainless steel,APV type H17 R-6,29 plates

Spiral heat exchanger,stainless acid proof steel,Alfa Laval C1-WH1,51,3 m2 heating surface.

Scraped surface heat exchanger,stainless steel,APV type 1 VT 460.

Plate Heat Exchanger,stainless steel,Sondex type S15/1G,15 plates

Scraped surface heat exchanger,stainless steel,Brogli model Agitemp,9,2 kW gear motor,212 rpm.

Plate heat exchanger,stainless steel,Pasilac type H17 RK-6 no.1,17 plates

Tube heat exchanger,stainless steel,with Ø 20 mm tubes,cabinet Ø 350 x L 2700 mm.