used Mills for sale

Normal steel Drive: 22 kW, D = 600 mm, mounted on frame.

Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.

Material: mild steel Drive: 45 KW Weight: 2000 kg Dimensions: 1500 x 1500 x 1600 mm

Material: steel Engine: 75 kW Pin-disk Capasity factor: F=ca. 6,3 Drive: 75 kw Speed: 4900 The machine is as good as new. You can also get the entire system with all components.

Used stainless steel fruit mill knife type made by APV, model EG450. Capacity 10 tones/h.

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

Drive system: SIEMENS DS - engine 55 kW,. average rotor diameter: 800 mm Rotation: 3,000 rpm Tools: 96 PCs Grinding gap: 8 - 0.5 mm Air volume: 3,000-3,700 m m²/h Total weight: 2,500 kg Engine data: 55 kW, 3.000 rpm, 400 V, 50 Hz, IP 54 Dimensions approx.: 2,350 X 1,400 X 1,200 (L X W X H) Usage area: Grinding of grain sizes approx. 20-250 µm in 2004, the storage and the engine were renovated and converted the plant to circulating oil lubrication with oil pump and accessories.

Speed: 5.295 UPM, with documentation

Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.

0,74 kW, 720 RPM 2 units available

Mobile colloid mill incl. hopper etc. 7.5 kW. Capacity: ca. 20'000 litre/h.

Pellet mill -Indcluding rolls and 6mm die -conditioner -70kw motor -Build on foundation The inside diameter enters as 420mm and the pelleting widht is 80mm

Bühler DPAB pellet mill Capacity 3t/h Die: inside diameter 660mm Pelleting width 178mm Pelleting area 36.9dm2 Rolls diameter 320mm Including Sprout Matador conditioner 18kw 200kw motor 380V 50Hz 990 rpm Foundation for pellet mill 1x. 3.2 mm die with rolls steering

For sale is a stirrer mill / perl mill of Bühler AG at our company headquarters in Bad Zwischenahn. The machine is sold due to low usage and restructuring and is therefore needed. The key data (all data are approx.): Manufacturer: Bühler AG Model: Centex L2 with pump and control cabinet Built: 2017 Volume: 10.1 L Max pressure: 3 bar Min./Max. permissible temperature: 0/70 °C More information can be found on request or on the photos A pick-up is possible with prior appointment from now on. If you have any questions/price requests, please send a message, we will answer as soon as possible.

Type: CS 150/100-2 No.: 5582 Year of construction: 1990 Power: 1.5 kW n = 1500 min-1 6 different filter cartridge Spare cutting blade Fishing bags, switchgear Inlet funnel with wood block Dimensions: LWH = 350x250x600mm Weight: approx. 40 kg

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

Drive: 1.1 KW weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills available.

Drive: 1.1 KW Weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills stock.

Universal mill for the grinding. Drive: 75 KW / 2966 UPM; 5 identical machines on stock!

Perlmühle Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

horizontal type Container volume: 24.6 litres, product-contacting parts made of stainless steel (1.4571) with documentation

No.: 56218 Power: 4 kW with hose pump and control cabinet highly specified, as good as new

Used hammer mill Fitz Mill D6. Motor power 5,5 kW.

Drive: 2,2 kW stainless steel

Used knife mill made by FitzPATRICK. Damaged engine, no top cover.

N°: M14088 Y.O.M.: 1990 good condition, overhauled, new mechanical seal Pressure double coat: 2.5 bar Pressure product room: 2 bar Dimensions LWH: 1650 x 1200 x 2100 mm Weight: approx. 1.3 t

with funnel, jacket on mobile carts No off switch Motor Loher 3.9 kW Year of construction: 1990 Combined mill Condition very good Origin: BASF Dimensions: LWH = 450x450x1300mm Weight: approx. 100 kg

No.: 12690 Year of construction: 1987 top condition Head with jacket Hopper and discharge chute Power: 2.2 kW Off switch available Dimensions: LBM = 300x400x770mm Weight: approx. 45 kg

Power: 22 HP, 2880 min-1 EMB electric motors AG Switzerland Stainless steel housing Hopper with feeding screw Dimensions: LWH = 400x400x1300mm (without screw) Weight: 300 kg

Fryma Perforated Disc Mill ML 180

Factory No.: 52517/01 Y.O.M.: 2001 Total power: 3.55 kW Eex Protection Pressure product room: 2.5 bar speed-controlled hose pump Delasco speed-controlled rotor Pressure, temperature measurement Stainless steel case double-acting mechanical seal with locking pressure station Grinding beads, care fat standing on a working table Condition as good as new Dimensions LWH without table: 1200 x 600 x 1250 mm Dimensions Table LW: 1300 x 900 mm Weight: 300 kg

N°: 42969/00 Y.O.M.: 2000 Power: 3.37 kW total Pressure product room: 2 bar pressure-monitored, temperature-monitored Material Product space: Alumium oxide ceramic Feeding pump, hose pump, speed-controlled Rotor speed-controlled Machine unused and as good as new Dimensions LWH: 1000 x 500 x 800 mm Weight: approx. 300 kg

No: M17822 Y.O.M.: 1998 Double-acting mechanical seal Locking pressure station Stainless steel speed-controlled feed pump Dimensions LWH: 1200 x 1900 x 1100 mm Weight: approx. 500 kg

No.: 16965 Y.O.M.: 1996 Power: 46 kW total Pressure product room: 4 bar Pressure double coat: 2 bar Temperature max: 130°C Stainless steel version, Pharma water-cooled engine Double-acting mechanical seal with locking pressure station overhauled, very good condition Dimensions LWH: 2000 x 1700 x 2200 mm Weight: approx. 1.4 t

Year of construction: 1988 No.: M 13513 Print working area: 2.5 bar Double jacket 2 bar with feed pump speed control Control cabinet Dimensions: LWH = 900x800x1400mm Weight: approx. 400 kg Grinding Chamber split, new bearings required Spare parts: O-rings in

Y.O.M.: 1991 Machine No.: M15177278 Power: 18.5 kW with funnel, circulating line with three-way valve LWH: 800 x 600 x 1600 mm Weight: approx. 250 kg Attention: no mechanical seal included, can be reinstalled upon request

Machine number: M16694 Y.O.M.: 1995 Working pressure: 6 bar Double jacket: 6 bar Grinding set normally toothed Power: 60 kW case with double jacket Product-in-outlet milk pipe double-acting mechanical seal LWH: 1100 x 700 x 800 mm Weight: approx. 350 kg

Laboratory mill Factory number: L10116 Y.O.M.: 1985 Workspace pressure-resistant: 4 bar with funnel, circulation line and three-way valve Power: 0.75 kW, 380 V Grinding set cross-toothed Mill and grinding set as good as new Switchgear with emergency stop LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Machine No.: M 15805 Y.O.M.: 1992 Pressure working space: 1 bar Pressure double jacket: 6 bar Inline version horizontal Product Connections Triclamp very good condition LWH: 400 x 260 x 240 mm Weight: approx. 30 kg

Factory number: L10113 Y.O.M.: 1984 Workspace pressure-resistant 4 bar with funnel, switchgear 380 V Circulation line with three-way valve Power: 0.75 kW Grinding set cross-toothed good condition LWH: 300 x 300 x 650 mm Weight: approx. 30 kg

Material: steel Content approximately: 6000 liters Drum-outside-diameters: 2000 mm Drum-outside-length: 2200 mm Drum-speed: 20 Upm Engine: 37 kilowatts Tension: 400 V, 50 Hz The mill is equipped with a dust-bonnet and conic collective-funnel. The sub-edge of the collective-funnel is in approximately 950 mm height ordered, so that a container can be driven under this funnel. An elastic intermediate piece connects the collective-funnel with the container. The drive is equipped with a frequency converter, with what a grade-loose speed-adjustment and an easy positioning are possible with lowest speed. The mill is interior with a 30 mm strong Polyurethan-coating equipped. Drum has a 2 - 3 in the cylindrical area outside mm strong coating from Polyurethan, as well like the dust-coat. For the continuous settlement during the business, the manhole-cover with Polyurethan\\\\\\\\s co ...

Greerco High Share Division, USA with funnel, circulation line, three-way valve Power: 1.8 kW, engine ABB mounted on a mobile frame Machine as good as new, unused Dimensions LWH: 500 x 500 x 1300 mm with double jacket for heating and cooling Weight: approx. 100 kg

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Drive power 22 kW & kW 5,5 Complete Feinstvermahlungs system with filters, rotary valves, control, dosage, monitoring oxygen and nitrogen addition The machine is available in the refurbished condition. The entire documentation is available! If you have questions, you can contact us at any time.

Bread Mill - Pre-Shredder for optional loading by hand or by conveyor belt. The machine processes whole or sliced bread in cold or hot state directly from the mains tape furnace, as a precursor for subsequent drying as well as with appropriate screening insert, also for direct Reprocessing, electric motor 15 kW, 2950 rpm, absolutely as good as new with additional external fan due to Frequency inverters - so far not 100 operating hours Frequency inverter Fabr. Toschiba VF-PS1, Power up to 70 Amp. Absolutely as good as new, was put into operation together with the engine, with documentation and operating instructions Pre-shredder with accessories: 1 additional shredding tool and clearing tool, as well as div. Various screen segments for inserting

with screen grate, mild steel,. = 300 mm diameter (turntable), belt drive 6.0 = 2,900 rpm, kW, mounted with dosing unit on steel plate

Perforated disc mill Manufacturer: Karl Schnell Type: 062-F28-248 N°: 42686 Power: 21 kW with funnel and discharge chute Control cabinet with on-off button Plug connection Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1670 mm Weight: approx. 500 kg

Perforated disc mill Manufacturer: Karl Schnell Type: 072-F320 N°: 42858 Power: 34 kW with funnel and outlet shear (milk pipe Ø 85 mm) Perforated disc of 3 mm Cutting knife new very good condition various spare parts: ejector, perforated disc, cutting knife, seals, etc. Operating instructions LWH: 900 x 800 x 1470 mm Weight: approx. 550 kg