Used stainless steel batch fluid bed dryer made by Aeromatic model Stre-30 G-W101. New 1978. Swiss production Wirbelschicht - Trockenungsaniage - Capacity of 150 liters of water evaporation / hr. - A shower - The heat exchanger - A blower - There is a buffer tank - The control panel - Channels are filter - Two tanks interchangeable - Worked at the pharmacy (product unknown) - A bag filter, co channels - Removed, not running around. Year - Complete documentation and schematics - Dimensions: Wed. 90 cm, length 170 cm, the total size of approx. 3 m height. Approx. 170 cm
Aermax warm air furnace for grain drying with a power range from 720 to 980 kw Aluminium frame case Double insulation glass wool Sandwich panels for a better insulation of noise and heat Combustion chamber stainless steel AISI430 with large exchange surface Patented heat exchanger with high degree of efficiency (up to 94%), AISI304 stainless steel, pipes with conical, aerodynamic recess for low pressure loss
Used tray vacuum dryer 2 m3 Chemix
Used vacuum tray dryer made by Chemix, capacity 1m3.
- Custom-built spray dryer, housed inside three shipping containers. This mobile unit could be set up as it is in a new location, or the dryer could be installed within an existing building/site - Fully automated and controlled via touch screen - Consists of product tank, spray tower, cyclone, bag filters, inlet and outlet fans, burner and control panels - All contact parts 316 SS, suitable for drying of food or pharmaceutical products - Spray tower height 4.5m, total height of containers: 7.5m, footprint: 12m x 2.5m - Utilities required: 3-phase & single phase electrical power (12kW), LPG gas for burner, compressed air for valves and filter bags - Designed to operate 24/7 with a feed rate of 75 kg/h wet product at 85% moisture content (15% solids content)
Stock# U2308-6 Used 2970-litre stainless steel V-type jacketed vacuum blender/dryer by GEMCO General Machine Company (USA). Working volume 2970 l. The chamber is made of stainless steel 316 grade, dimple jacket and insulation are made of stainless steel 304 grade. Maximal product density 1.041 kg/l. Internal test pressure: full vacuum. Dimple jacket test pressure: 1 bar at 121°C. The chamber rotates with 2 RPM. Main drive consists of electric motor 4 kW, 380 V, 3 phase, 50 Hz, 1430 RPM, ExMSe34b with belt, gear and cyclo drives. Cyclo drive ratio 87:1. The chamber is equipped with vacuum pipe and intensive agitator (chopper) driven by electric motor 18.5 kW, 380 V, 3 phase, 50 Hz, 1470 RPM, Ex-M IIB-T5 with belt drive. The intensive agitator rotates with speed of 15.24 m/s. Internal diameter of chamber arm equals 1372 mm, diameter of feeding hatches 457 mm, diameter of discharge 305 mm ...
Used stainless steel fluid bed dryer granulator made by Glatt. Model WSG 120. Equipment: spray nozzle, operation recorder, the control panel for air preparation, exhaust fan. Includes vat passable. Engine 15kW / 380 V / 50 Hz. The size of the charge 120-180 kg. Air flow 7000m3 / h. The demand for heat: 110000 kcal / h. Temperature range: -10 / + 60 ° C Chamber capacity: 415 L. Implementation - Ex.
Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.
Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED
Two-storeyed belt cooler/dryer, inclusive blower and separator cyclone Dimensions: length: approx. 8,920 mm height: approx. 2,125 mm width: approx. 2,565 mm weight: approx. 13,000 kg Machine is renovated and ready for use, very good condition. You can also get the entire system with all components.
Drive from a rotary kiln from Krauss Maffei. The basis is a large gearbox from Pekrun, type CSH 11054 , installed here standing. In the foreground is the electric oil pump for the gearbox. If you have any questions, please call: 0171-8520552.
Material: steel Year of manufacture: 2002 Engine: 45 kW Content:2000 ltr Length x Width x Height: 5000 mm x 2200 mm x 3500 mm Batch-mixer. Filler neck: DN 220 With docking station for 1600 liter- pouring container Draining: 2 x DN 400 Botton flap - manual handling Optional for draining in 1600 liter- pouring container or in Big-Bag Assembled on rack Colour: RAL 1013 Very good condition. You can also get the entire system with all components you need.
Complete plant for drying and/or calcining of mineral materials, consisting of: feeding bunker in stainless steel (ca. 10 m³ capacity, incl. extraction screw, built 2008), Maguin rotary calciner (10.000 mm long x 1.350 mm Ø inside, fully ensulated, partly lined with refractory bricks, built 1993), combustion chamber for indirect heating with Maxon gas burner (consumption at 850°C burner temperature: 27,5 m³/h), water-based cooling installation (cools down output material to 50 - 60°C), suitable hot gas candle filter (ensulated, built 2008), steel construction (above drum and for the dust filter, built 2008) and computer controlled switchgear for fully automatic operation of all devices (designed / built by Lessines Industries in 2008). Operating temperatures: +/- 950°C hot gas temperature / ca. 750°C material temperature. Speed: Steplessly adj ...
Complete plant for the drying and/or calcination of mineral substances, consisting of: Stainless steel feed bunker (approx. 10 m3 capacity, incl. discharge screw, Y.O.M. 2008), Maguin rotary kiln (10,000 mm long x 1,350 mm inside, completely insulated, partially refractory inside, Y.O.M. 1993), Combustion chamber for indirect heating with Maxon gas burner (consumption at 850C burner temperature: 27.5 m3/h), Water cooling device (allows the material to cool down to 50 - 60C), suitable hot gas candle dust filter (insulated, Y.O.M. 2008), steel structures (above the drum and for the filter, created in 2008) and Switchgear for fully automatic operation (created by Lessines Industries in 2008). Operating temperatures: +/- 950C hot gas temperature / approx. 750C material temperature. Speed: Infinitely adjustable from 0 - 5 UPM. Very good condition.
Material stainless steel Engine 30 kW Content 4000 ltr Machine data Volume: 4000 l Material: V 4 A , 1.4401 Ground discharge over ball valve Mixing range closed with front cover Over hinge folding Absorption adapter for homogenisator (chopper) Machine incl. exhaust vapor, able for vakuum operation Complete assembled on base frame with drive unit Exhaust vapor: height ca. 1200 mm; Mixer and rack: 4950 mm x 1670 mm x 2800 mm Height without exhaust vapor Please attend mixing tools on the pictures We plan and build the whole arrangement with the machine by your need. You can get in addition from us used or new components. Between more than 1000 used machines which we have on stock you will find certainly also something for your need. Write us below!
Used Richard Simon & Sons LTD 28?x60? twin cylinder nip feed drum dryer. . Equipped with spare knives, control panel. Rolls chrome plated. Cast iron casing. Pressures and Capacities: ,Main Roll: 5.5 bar (11 Bar hyd.test pressure) 520 litres/Roll. Main Rolls: 0-10 rpm. 5.5 kW power. Air supply: Knife Bar: 5.5 bar Damplates: 5.5 bar Electrical Supply: 415V/3phase/50Hz, Dimentions: 5000mm length, 2600mm breadth, 2210mm height (w/chutes: 3200mm)
Fully automatic microwave drying system, Y.O.M. 1999, for drying ceramics and other materials at 80C. Usable width: 500 mm, usable height: 200 mm, circulating air volume: 2,100 m3/h, 32 microwave transmitters, with transport and control system, V2A conveyor belt. In very good condition.
Drum dryer one way, complete big capacity 2-3 t/h more information on request
Used roll dryer Spomasz Wronki type ZSE/P. 11m2 drying surface. Max. 0,7MPa pressure. Weight 12000 kg. The installed capacity 17,25kW. Steam demand 0.22 kg / s 780 kg / h. Working dimensions of the drum length. - 300 cm, diameter - 120 cm Year upgrading - 2005. Modernization roller included: - Grinding surface of the drum - Implementation of the new rollers outwork stainless steel - Execution of the shear knife on pneumatic actuators - Construction of new mechanical seals - Execution of the cast rim drive (we have a form)
Vibration batch dryer, used DESCRIPTION Vibration batch dryer for external hot-air heating, with 2 vibro drives, scraper and sieve bottom. SPECIFICATIONS Manufacturer, Type, YOM: unknown same version as Allgaier WS-R-V-CT TECHNICAL DATA Diameter: approx. 1200 mm Volume: approx. 500l Finish: Stainless steel Weight: 980kg CONDITION: used, operational, cleaned, as-is VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equipment for flour/ feed mill industry and bulk solids. Worldwide shipping and installation.