47 results Centrifuges

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766976
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 2.695 €

Separator, stainless steel, Alfa Laval type 2181M. For milk/cream. Capacity 3-5000 l/h. Incomplete. For spareparts.

Category: machines and plants for process engineering / Centrifuges
date: 25.01.2021 item-No.: 17475192
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: 40.000 €

Used Alfa Laval centrifuge, type HGD 610. Self-cleaning machine. Technical data: Temperature of the feed at the entrance of 0-100 ° C The ambient temperature of 5-45 ° C Interval between shots 1-60 min The maximum density of the process liquid 1000 kg / m3 The maximum speed of the bowl 6240/6235 rev / min, 50/60 Hz The maximum speed of the motor shaft 1500/1800 rev / min, 50/60 Hz RPM Counter 118-125 rev / min 50 Hz 142/150 rev / min, 60 Hz Gear ratio 104: 25 50 Hz 97:28 60 Hz Hydraulic capacity 15000 kg / h Obj?tno dump has become 5L The maximum density of the solid / raw 1046/1030 kg / m3 Engine power 18.5 kW Power consumption 9.5 / 15 kW (idle / maximum performance) Volume of lubricating oil 12 L Maximum working time without flow -misa empty 180 min -misa full 180 minutes Start-up time (min / mix) 6 / 6,5 min Brake stopping time (min / mix) 6 ...

Category: machines and plants for process engineering / Centrifuges
date: 16.04.2021 item-No.: 152371781
approved
dealer
New in: 2007
used
Seller: country1-pl Industrio Service Piotr Pruski
Price: 42.000 €

Used Alfa Laval decanter centrifuge model Aldec 40. Built in 2007. The kit includes: - decanter centrifuge - Ultromat dosing station - polymer pump - Netzsch sludge pump - control cabinet for the centrifuge - control cabinet for the compaction system Technical parameters of the centrifuge: - maximum cake density 1.2 kg / dm3 - temperature 0-100 degrees C - maximum speed 4000 rpm - drum length 1460 mm - drum diameter 353 mm - AISI 316 cover material - inner surface of the AISI 316 cover

Category: machines and plants for process engineering / Centrifuges
date: 03.03.2021 item-No.: 127019867
approved
dealer
New in: 1985
used
Seller: country1-pl Industrio Service Piotr Pruski
Price: 22.500 €

Used decanter centrifuge, made by Alfa Laval, model AVNX 620 B316. New 1985. Diameter of the drum 210/353 mm. The maximum speed is 4000 rpm. Sludge density 1.8 kg / dm3.

Category: machines and plants for process engineering / Centrifuges
date: 02.09.2020 item-No.: 126917159
approved
dealer
TOP Seller: country1-de REWA Gruppe - REWA KFP GmbH
Location: 45968 Gladbeck, Luxemburger Str. 11

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

Category: machines and plants for process engineering / Centrifuges
date: 16.04.2021 item-No.: 152372054
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: 15.500 €

Used centrifuge BRPX 207-345.

Category: machines and plants for process engineering / Centrifuges
date: 03.03.2021 item-No.: 28525603
approved
dealer
New in: 1997
used
Seller: country1-pl Industrio Service Piotr Pruski
Price: 8.100 €

Used centrifuge MAPX 207. New 1997. 6000-6300 rev/min. Weight 795 kg.

Category: machines and plants for process engineering / Centrifuges
date: 21.12.2020 item-No.: 141864767
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: 20.000 €

Used self-cleaning disk centrifuge made by Alfa Laval, type MRPX214 TGV-74 / 4103-10. Keys and documentation available. No base and control.

Category: machines and plants for process engineering / Centrifuges
date: 14.09.2020 item-No.: 145366741
approved
dealer
New in: 2000
used
Seller: country1-de GS-INDUSTRIESERVICE
Location: 89547 Dettingen

Nozzle separator

Category: machines and plants for process engineering / Centrifuges
date: 26.01.2021 item-No.: 151008867
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: VB 27.500 €

Used decanter Alfa Laval UVNX 314. Motor 15 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Control panel and documentation available.

Category: machines and plants for process engineering / Centrifuges
date: 05.10.2020 item-No.: 554911
approved
dealer
Seller: country1-de Centrimax - Winkelhorst Trenntechnik GmbH

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Category: machines and plants for process engineering / Centrifuges
date: 26.03.2021 item-No.: 143618383
approved
dealer
Seller: country1-pl Perry Machinery Poland
Location: 05-85 Ozarow Mazowiecki, Wolnosci 1a

Stock# U2308-10 Used stainless steel (316) vertical basket centrifuge by Ametek/Tolhurst Centrifugals (USA) type Batch-Master model B-M with perforated bowl size 48" (1219,2 mm) diameter x 30" (762 mm) height. Machine is designed for periodical work with automated discharge of cake. Working rotation of bowl from 0 up to 1080 rpm. Top feeding, bottom discharge. Machine is mounted on carbon steel supporting frame. Bowl is driven by hydraulic device with power 30 kW, 1470 rpm, 380 V, 50 hz, design Ex. Included control panel and stainless steel conical chute.

Category: machines and plants for process engineering / Centrifuges
date: 02.09.2020 item-No.: 13601701
approved
dealer
TOP Seller: country1-de REWA Gruppe - REWA KFP GmbH
Location: Gladbeck

System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Höchstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Category: machines and plants for process engineering / Centrifuges
date: 10.12.2020 item-No.: 150186405
approved
dealer
New in: 2012
used
Seller: country1-de Andreas Fabig Maschinenhandel

High-performance centrifuge Bauer BD50 installed in a 20-foot container. Very good condition, only about 1100 operating hours, almost as good as new, ready for immediate use. Optionally, a flocculant system is available in a 10-foot container at an additional cost. Throughput: Maximum 30 m3/h Drum wall thickness: 17 mm Drum length: 950 mm Female drum diameter: 600 mm Speed: 2000 rpm

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766980
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 4.700 €

Seperator, stainless steel, Schnell, CEPA model 101H. Standing on foot console. 2,2 kw motor, max. 14.000 rpm.

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766983
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 10.000 €

Basket seperator, stainless steel, Cepa type TZ3. Ex-secured with variabel speed. Connection for continuous filling. Shower nozzle. Control cabinet. Ø 300 mm. basket.

Category: machines and plants for process engineering / Centrifuges
date: 13.04.2021 item-No.: 151111327
approved
dealer
TOP Seller: country1-de HERBOLD
Location: 74909 Meckesheim

Oil centrifuge with used control cabinet De-oiling centrifuge with second-hand control unit

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766984
approved
dealer
Seller: country1-dk Handing
Price: 6.050 €

40 l. basket centrifuge, stainless steel, Ellerwerk. Operation from the top. Ø 500 x 200 mm basket. Variable speed max 3000 rpm. Capacity max. 20 kg.

Category: machines and plants for process engineering / Centrifuges
date: 02.09.2020 item-No.: 2832775
approved
dealer
TOP Seller: country1-de REWA Gruppe - REWA KFP GmbH

used Decanter / centrifuge quick way Z 5E-4 / 454 drum-inside diameter: 529 mms diameter-length relation: 1:4 volumes: 270 l drum speed: max. 3500 min (variably) drum impulse: Electric motor with fan belt impulse horizontal conical-cylindrical full coat snail centrifuge to the continuous ones separation of a liquid and a sedimentierenden solid. The liquid phase is led away without pressure about generous expiry drillings at the cylindrical end. The optimisation of the pond depth happens above well adjustable military records with big shifting area. The solid decision occurs under centrifugal strength about dropping openings at the conical end.

Category: machines and plants for process engineering / Centrifuges
date: 11.02.2021 item-No.: 150173712
New in: 1996
used
Seller: country1-de Humintech GmbH
Location: 41517 Grevenbroich
Price: 17.500 €

Two identical decanter centrifuges from Flottweg are offered, which were previously used in a wastewater treatment plant. The differential speeds are controlled by hydraulic drives. Both plants ran alternately, were always maintained and maintained by Flottweg service technicians. The evaluation device is added to indicate the differential speed. Unfortunately, there is no longer a control cabinet for this. The plants have been running until vir. A total of two decanters would be sold individually. For further technical questions, please contact us. Technical data: Drum diameter: 420/226mm Speed: 4000 rpm Steep cone Drum motor power: 22kW

Category: machines and plants for process engineering / Centrifuges
date: 22.12.2020 item-No.: 149728097
approved
dealer
New in: 1995
used
TOP Seller: country1-de ENDERS Produktion GmbH

used decanter / centrifuge, max. drum speed: 3500 rpm, drum diameter: 420/267mm, ALLDOX polymer station, hydraulic station, electric control cabinet, NETZSCH pump (My. 2008)

Category: machines and plants for process engineering / Centrifuges
date: 27.01.2021 item-No.: 151025051
approved
dealer
New in: 2008
used
Seller: country1-de Andreas Fabig Maschinenhandel

Maximum speed: 4200 rpm Inner drum diameter: 420 mm Discharge diameter: 240 mm Material drum: stainless steel 1.4463 Drive: Simp Drive Drum drive: 22 kW Screw drive: 7.5 kW Including control cabinet, Alltech polymer system, sound hood Available expected in mid-2021

Category: machines and plants for process engineering / Centrifuges
date: 09.09.2020 item-No.: 147695260
approved
dealer
New in: 2001
used
Seller: country1-de RoSta Uwe Schaub
Location: 65582 Diez

Centrifuge MULTIFUGE 3-SR Manufacturer: Heraeus Y/O:200140080191 LWH: 740 x 700 x 360 mm

Category: machines and plants for process engineering / Centrifuges
date: 09.09.2020 item-No.: 147695258
approved
dealer
New in: 1992
used
Seller: country1-de RoSta Uwe Schaub
Location: 65582 Diez

Centrifuge Megafuge 1.0 Manufacturer: Heraeus Sepatech GmbH Y.O.M.: 1992 Factory no.: 193398 LWH: 540 x 460 x 380 mm

Category: machines and plants for process engineering / Centrifuges
date: 09.09.2020 item-No.: 147695257
approved
dealer
New in: 1998
used
Seller: country1-de RoSta Uwe Schaub

Centrifuge ROTINA 46 Manufacturer: Hettich Y.O.M.: 1998 Type: 4605 Factory number: 0001489 Speed: 11000 rpm

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766982
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 3.365 €

Centrifuge, Jouan type KR4-22. With cooling compressor, max speed 4900 rpm. - variable. Max capacity 6400 ml. Max RFC 7200 x g.

Category: machines and plants for process engineering / Centrifuges
date: 22.12.2020 item-No.: 149728098
approved
dealer
New in: 1995
used
TOP Seller: country1-de ENDERS Produktion GmbH

used decanter / centrifuge, max. drum speed: 3500 rpm, drum diameter: 448mm, polymer station, SEEPEX pump, hydraulic station, control cabinet

Category: machines and plants for process engineering / Centrifuges
date: 02.09.2020 item-No.: 3605314
approved
dealer
TOP Seller: country1-de REWA Gruppe - REWA KFP GmbH
Location: Gladbeck

Used decanter / centrifuge KHD S 3-02 Drum speed: 2050 rpm - Viscotherm Hydraulics Material: Steel Built: 1994 with soundproof housing. The plant is in good condition. Two identical machines are available. Purchase and rent possible.

Category: machines and plants for process engineering / Centrifuges
date: 06.04.2021 item-No.: 141287978
approved
dealer
New in: 1987
used
Seller: country1-de CARDA USED MACHINES
Location: 74889 Sinsheim

Model: Solid Bowl Centrifuge Material: H II (1,0425) Driving force: 18,5 kW Max. bowl speed: 2200 1/min Inner diameter drum: 532 mm Drum wall thickness: 12,5 mm Interior drum length: 2208 mm Permissible sediment density: 1,5 kg/dm3 Empty weight: 2350 kg Condition: Used Technical documentation: Yes Accessories: Hydraulic Message: Immediate disposition! We also have an second identical decanter (C-1007) available.

Category: machines and plants for process engineering / Centrifuges
date: 06.04.2021 item-No.: 141287982
approved
dealer
New in: 1987
used
Seller: country1-de CARDA USED MACHINES
Location: 74889 Sinsheim

Model: Solid Bowl Centrifuge Material: H II (1,0425) Driving force: 18,50 kW Max. bowl speed: 2200 1/min Drum wall thickness: 12,5 mm Interior drum length: 2208 mm Permissible sediment density: 1,5 kg/dm3 Empty weight: 2350 kg Condition: Used Technical documentation: Yes Accessories: Hydraulic Message: Immediate availability. We have a second identical decanter (C-1006) available.

Category: machines and plants for process engineering / Centrifuges
date: 26.03.2021 item-No.: 6938306
approved
dealer
Seller: country1-pl Perry Machinery Poland
Location: Ozarow Mazowiecki

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

Category: machines and plants for process engineering / Centrifuges
date: 21.12.2020 item-No.: 87807918
approved
dealer
New in: 1995
used
TOP Seller: country1-de ENDERS Produktion GmbH

Maximum speed: 2,500 1/min Drum inner diameter: 758 mm Drum wall thickness: 20 mm Maximum filling volume: 715 dm ³ Maximum operating temperature: 50 ° C Maximum operating pressure: 1.0 bar Total weight: 13,500 kg

Category: machines and plants for process engineering / Centrifuges
date: 06.04.2021 item-No.: 143618377
approved
dealer
New in: 1980
used
Seller: country1-de CARDA USED MACHINES
Location: 74889 Sinsheim

Material: V4A Max. bowl speed: 1380 1/min Inner diameter drum: 800 mm Drum wall thickness: 18 mm Interior drum length: Drum height 400 mm Permissible sediment density: 5,0 kg/dm3 Max. filling volume: 83 dm3 Dimensions: L 2100 mm x W 1600 mm x H 1400 mm Empty weight: 2400 kg Condition: Used Technical documentation: Yes Accessories: Langen & Co hydraulic K3-10 with tool, hydraulic: L 1200 mm x W 800 mm x H 1000 mm, switch cabinet: L 1800 mm x W 400 mm x H 800 mm, spare parts.

Category: machines and plants for process engineering / Centrifuges
date: 16.04.2021 item-No.: 152371752
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: VB 6.500 €

Used basket centrifuge made by Kronen, basket height 4700 mm, overall dia. 9700 mm.

Category: machines and plants for process engineering / Centrifuges
date: 23.03.2021 item-No.: 151956994
New in: 2015
used
Seller: country1-be Captar bv
Location: 7334 Saint-Ghislain

SUPER-D-CANTER PM 35000 PENNWALT SHARPLES STOKES SPECIFICATIONS: Brand: PENNWALT SHARPLES STOKES Type: SUPER-D-CANTER Model: PM 35000 Serial number: x-2006-PM35000-028 TECHNOLOGY: Continuous Solid-Bowl Centrifuge Max. Bowl Speed: 2900 rev/min Engine: 37KW Installation year: 2015 Built on skid, galvanised Landing platform on level +1 Safety ladder Safety railing Conveyor FUNCTION: Puqsnq Continuous Solid-Bowl Centrifuge Decanter USE: Classification of solids, clarification of liquids, concentration of solids, dewatering of solids

Category: machines and plants for process engineering / Centrifuges
date: 26.10.2020 item-No.: 464755
approved
dealer
Seller: country1-de Minox Maschinenhandels GmbH
Location: Offenbach/Queisch

Material: stainless steel Weight: 350 kg Length x Width x Height: 1500 mm x 1200 mm x 1250 mm max.rotor speed : 5000 Upm, max. z-factor : 2180. Drum diameter : 150 mm, max. charge : 77 dm³. Drive : 5,5 kW u. 0,75 kW. Very good condition. Are you looking for something else? Write us below!

Category: machines and plants for process engineering / Centrifuges
date: 16.04.2021 item-No.: 152372034
approved
dealer
New in: 1998
used
Seller: country1-pl Industrio Service Piotr Pruski

Used Siebtechnik worm/screen centrifuge "conturbex". Model H 520. YOM 1998. Max speed 2000 rpm. Density 1,25 kg/dm3.

Category: machines and plants for process engineering / Centrifuges
date: 05.10.2020 item-No.: 18073385
approved
dealer
Seller: country1-de Centrimax - Winkelhorst Trenntechnik GmbH

Besides used, reconditioned separators and decanters of trademarks of GEA Westfalia Separator, Flottweg and Alfa Laval delivers more centrifuge designs, two fluids of different densities used for the drying of solids, the clarification of liquids or the simultaneous separation - hence separating centrifuge - Centrimax. Also these industrial centrifuges are by Centrimax, overhauled, with a new plc and delivered with a mechanical warranty.

Category: machines and plants for process engineering / Centrifuges
date: 25.01.2021 item-No.: 13125414
approved
dealer
New in: 1991
used
Seller: country1-pl Industrio Service Piotr Pruski
Price: 21.500 €

Used Spomasz decanter centrifuge, model AWP 35.1-4.2. New 1991. Drum diameters: 350 mm, 3500 RPM rev/min. Hydraulic throughput of 20m3/h. Weight 1800kg., 11kW engine.

Category: machines and plants for process engineering / Centrifuges
date: 16.04.2021 item-No.: 152371753
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: 8.500 €

Used disc batch centrifuge LWG-47. Available 2 pcs.

Category: machines and plants for process engineering / Centrifuges
date: 25.01.2021 item-No.: 147230460
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: 26.500 €

Used decanter centrifuge from Spomasz Wronki type WD-452. Installed power about 30 KW, hydraulic capacity 20,000 L / h depending on the density of the fed medium, acid-resistant version. Old type control. Technically efficient. Performing a new control on the inverter is a cost. 5000 Euro.

Category: machines and plants for process engineering / Centrifuges
date: 16.04.2021 item-No.: 152371756
approved
dealer
New in: 2017
used
Seller: country1-pl Industrio Service Piotr Pruski
Price: 11.500 €

Used lab centrifuge SL 40 THERMO SCIENIFIC. New 2017, available 2 pcs.

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766398
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 7.000 €

Centrifuge, stainless steel, Westfalia type KA25-35-576. two-chamber bowl. 7,5 kW motor, 6550 rpm.

Category: machines and plants for process engineering / Centrifuges
date: 25.01.2021 item-No.: 70106509
approved
dealer
Seller: country1-pl Industrio Service Piotr Pruski
Price: 38.000 €

Used centrifuge with a capacity of 4000 L/h for cheese will homogenized. Made by Westphalia. Model SiH 10007. Expense of cheese up to 800 kg/h, motor power 15 kW, turnover bittern 5,500/min, centrifuge weight: 1530 kg, the weight of bowl: 240 kg.

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766687
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 8.000 €

Centrifuge, stainless steel, Westfalia type TA14-06-506, machine no. 1675 380. 1984. 5,5 kW motor, 6140 rpm. Solid substance: 1,2.

Category: machines and plants for process engineering / Centrifuges
date: 08.03.2021 item-No.: 145766397
approved
dealer
Seller: country1-dk Handing
Location: 3540 Lynge
Price: 8.000 €

1 pc. Centrifuge, stainless steel, Westfalia type TA14-06-506, machine no. 1681 026. 1983. 5,5 kW motor, 6140 rpm. Solid substance: 1,2.

Category: machines and plants for process engineering / Centrifuges
date: 26.01.2021 item-No.: 151008820
approved
dealer
New in: 1986
used
Seller: country1-pl Industrio Service Piotr Pruski
Price: VB 18.500 €

Used centrifuge made by WSK Kraków, model UVPX 207. New 1986. Weight 670 kg. Centrifuge for animal fat.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)