grinding machines wood used for sale (662)

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.

Numer katalogowy 6349 DANE TECHNICZNE - max szerokość obrabianego elementu 250mm - max wysokość obrabianego elementu 110mm 2 agregaty szlifujące: górny i dolny z góry: - 2 rolki dociskowe poślizgowe - agregat szlifujący 2 walce metalowe + trzewik - rolka dociskowa poślizgowa - taśma gumowa ciągnąca – VACUM z dołu: - taśma ciągnąca - 2 rolki poślizgowe, metalowe - agregat szlifujący 2 walce metalowe + trzewik - 3 rolki wyprowadzające ciągnące, metalowe - czyszczenie papieru przy agregacie górnym i dolnym - elektrycznie ustawiana wysokości szlifowania - oscylacja taśm szlifujących - płynna regulacja prędkości posuwu na falowniku - silniki główne 2×5,5kW - zapotrzebowanie powietrza 8bar - średnica króćców odciągu 4x100mm - wymiary całkowite dł/szer/wys 1400x1200x1850/2250mm - waga 1490kg – do krótkich ele ...

SPECIFICATIONS: Grinding/calibration line Editing: from above and below 2 motors with 18.5 KW each Cardan drive Sanding belt dimensions mm: 2,620 x 1,180 Vacuum carpet

SPECIFICATIONS: Horizontal belt grinding machine Table width mm: 800 Table length mm: 2,900 Sanding belt width mm: 1,500 Sanding belt length mm: 8,000 Maximum working height mm: 600 Power of the main engine HP: 4 With sanding shoe

Number of sanding units: 4 St.sanding width: 200 mmSanding height max.: 150 mmLÖWER CrossMaster DBx2-200--------------------------------for the finish sanding and intermediate sanding of all stripsType with simultaneous processing from above and below- 1 disc sanding flap unit each from above andbottom, D= 200mm, 0.75 kW,- Continuous speed control of the disc units200-600 rpm via frequency converter- 1 grinding flap roller each from above and below, D = 270mm,B=150mm, counter rotation, 0.75kW each,- Continuous speed control of the grinding spindles200-1000 rpm, via frequency converter- Staggered arrangement of the sanding units, each at the top and bottomBelow, grinding flap disc with subsequent grinding flap roller- Working width max. 200mm- Safe conveyor belt feed (top and bottom).spring-loaded pressure rollers, transport belt width 200mm- continuous feed 4-20m/minGeared motor 1.5 kW  ...

Number of sanding units: 2 St.sanding width: 190 mmSanding height max.: 2-180 mmLÖWER double-sided grinding machine DSM 2000---------------------------------Double-sided single wood sander for sandingSolid wood such as window wood etc. Stable top qualityGuide with long casting tables, brushing and finishing equipmentand conveyor belt feed. Suitable for high continuous loadseven with higher chip removals.- Staggered sanding and finishing units at the top and bottom- Directly driven rubberized grinding rollers for slip-free power transmission- Combined grinding via roller and shoe for high chip removal at the same timeflat intervention zone- Maintenance and wear-free CERMET-coated sanding shoes with verygood thermal conductivity and absolute Dimensional accuracy- External cooling of the grinding zones for cooler grinding and higher grindingGrinding belt service life- Forced pneumatically ...

connected load frequency: 230 Voutput: 1,2 KWtaper diameter: 19mm mmturning speeds: 1000 - 3000 U/minroll surface width: max. 100 mmroll length: max. 120 mmweight: 2,8 kgrange L-W-H: 430 x 280 x 100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 100,150 mmSanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St.sanding width: 290 mmSanding height max.: 180 mmLÖWER-DoubleSander Solid DSM 3000----------------------------------Two-sided single wood sander for sandingSolid wood such as window wood etc. StableTop version with long casting tables, brushing and finishingdevice and conveyor belt feed. Suitable for highPermanent load even with higher chip removals.- Staggered sanding and finishing units at the topand below- directly driven rubberized sanding rollers for slip-prooffree power transmission- Combined grinding via roller and shoe for high chip removalwith a flat intervention zone at the same time- maintenance and wear-free CERMET-coated grinding wheelsshoes with very good thermal conductivity and absoluteDimensional accuracy- External cooling of the grinding zones for cooler grindingand longer sanding belt service life- force-guided pneumatically controlled san ...

Number of sanding units: 2 st.sanding width: 390 mmSanding height max.: 390 mmLÖWER BeamSander HBS 402--------------------------------Single-sided belt sander for sanding beams,Glued beams and other bar-shaped workpiecesWood with two sanding units from above.- constant working height enables the use ofRoller conveyors in front of and behind the machine- heavy version with cast table- Conveyor belt feed with heavy pressure rollers- Calibration unit with steel roller- Fine grinding unit with fixed calibration sanding shoe- Working width 390mm- Workpiece thickness 4mm - 390mm1. Grinding unit (calibration)- heavy steel roller with 200mm diameter- stable roller bearing- pneumatically controlled sanding belt oscillation- Sanding belt dimensions 400x1800mm- Drive motor 7.5 kW- Chip removal depending on the belt grain size up to 2mm2. Grinding unit (fine grinding)- Calibration sanding shoe CERM ...

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 2 - 180 mmLÖWER - DoubleMaster DSM 2000 DB-------------------------------------------------Double-sided single wood sander with additionalTransverse brush sanding unit (discs) andLongitudinal brush sanding unit (roller) for sandingSolid wood such as B. window wood etc.Stable top version with long cast tables andConveyor belt feed. Suitable for high continuous loadseven with higher chip removals.1. Belt sanding unit with CERMET sanding shoe pre-sanding2. Disc aggregate cross grinding for defibering3. Rolling aggregate longitudinal grinding for directional finishDirection of growth- Staggered sanding and finishing units at the topand below- directly driven rubberized sanding rollers for slip-prooffree power transmission- Combined grinding via roller and shoe for high chip removalwith a flat intervention zone at the sam ...

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (L/W/H): 3065x1600x1900 mmweight of the machine ca.: 1500 kgLÖWER Leistomat SD---------------------------------Automatic fine grinding machine for wood grinding (smoothing, defibering andEdge breaking) or intermediate sanding of profiled window bars. With soft discTechnology for the visible surfaces as well as automatically safe profile andWidth adjustment.- 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm1 softisc unit Ø=200mm above 0.75kW,1 slat roller unit L=200mm top 0.75kW,1 soft disc unit Ø=200mm bottom 0.75kW,1 slat roller unit L=200mm bottom 0.75kW,2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm- Linear guidance of all grinding unitsLinear ball bearing sets on hardened shafts- time-controlled immersion of all lamella roller unitsdirectly above the i ...

CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

Long belt grinding machine, roller spacing approx. 3000 mm

Belt grinding machine for wood & metal, roller spacing approx. 3000 mm

Grinding machine • For grinding curves and internal radii

TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200

Handcuper Meinert PH6 for gate saws

Automatic oscillating curve grinding machine Grinding width 300 mm Grinding height from 3 - 100 mm Feed continuously from 25 - 25 m/min Feed motor 0.55 KW Drive motor 7.5 kW Grinding belt 320 x 2000 mm

Working Length: 3100 or 4100

TECHNICAL DATA: Required space mm: 830 x 860 x H 1150 01 Vertical brush KW 0,37 Motion: right - left Weight Kg: 250

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

Workpiece width max mm: 1700 Material thickness max mm: 100 02 Workbenches mm: 5000 x 1700 02 Oscillating aggregates Rollers (cotton) mm: 350 02 Roller motors HP: 18.5 Vacuum Table - HP 12.5

4 Belt grinding unit 2 grinding brushes Carpet length mm: 5500 Carpet width mm: 400 (extendable) Weight Kg: 800

Drawer fitting machine husband Type: XII LOD 2 oscillating abrasive belts Grinding wall surface 760 mm long x 280 mm high max. drawer width - fit width 1000 mm maximum drawer height 250 mm Width adjustment by handwheel Support tables on each grinding wall outside Support table size 650 mm x 235 mm Engine strengths 1 x 4.8 kW and 1 x 7.5 kW Dimensions 1900 mm x 1300 mm x H 1200 mm