subcategories
(3rd category level)
Manufacturer:
(Category: 204)
width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 0,084 tdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg
Key data: 1300 mm, 4 , 150 mm
WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm
width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 0,11 tdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1100 mm, 1 , 150 mm
Combination grinding unit with contact roller and air grinding shoe Brush roller Abrasive belt tension, pneumatic motor strength adjustment Specifications: max. working width 1100 mm Max. workpiece thickness 150 mm Min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Feed speed 5/10 m/min. Motor power grinding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0kW Operating pressure 6 bar Air pressure approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Cntaou7R Machine depth approx. 1700 mm Machine height approx. 1900 mm
Key data: 110 mm, 1 , 160 mm
Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...
Key data: 1350 mm, 3
electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet
grinding length: 600 mmgrinding width: 400 mmworkpiece height: mmtotal power requirement: 11 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 1 st.sanding width: 150 mmSanding height max.: 150 mmLoewer edge finishing machine MiniSpin NMachines for finishing and fine sanding ofEdges and profiles with a grinding spindlehorizontal or vertical.Motor 0,75 KWSpindle in vertical position for machining edgesPivoted spindle in horizontal position, laterallyetc. for processing longer profile bars orConjunction with a combined grinding head for grindingof edges with a grinding disc bladesGrinding head swiveling + / - 20 ° for editingoblique linesWorking height / width 150 mmmax. Diameter roller / brush
grinding length: 600 mmgrinding width: 300 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2,9 x 2,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
car. Edge profile grinding machine Langzauner LZK-SD Machine from a small craft business Joinery dissolution due to retirement ex location net € 6.000,00 as seen
Long belt sanding machine Höfer Long belt sander Höfer approx. 1000 x 2500 mm Machine is FUNCTIONAL and ready for demonstration from PENSION/Handicraft business From the carpentry site, as seen NET € 1,500.00
SPECIFICATIONS: Machining width: 1350 mm Sanding belt width: 1370 mm Sanding belt length: 1900 mm Steel roller: Ø 150 mm Processing thickness: max. 150 mm Total installed power: 10 hp Variable speed drive: 0.75 hp Predisposition to depressor or aspirator COMPOSITION: 01 Calibration Roller + Buffer Roller Unit 01 Scotch brite aggregate
SPECIFICATIONS: Processing width: max. 1400 mm 2 adjustable speeds Motor 1: 30 kW Motor 2: 22 kW COMPOSITION: Group I: Steel roller Ø 400 mm Group II: 2 steel rollers of Ø 130 mm each
1.5 KW, 400 V, 50 Hz, Oscillatation, Abrasive belt 150x2515 mm, Height-adjustable table 840x300 mm, Side table for curves 250x300 mm, Swivel up to 90°, angle stop, Extraction connection 100 mm, Weight 146 kg
oscillating belt sanding machine model VOLPATO NTS 150/C for wood edges, panels, furniture, doors, window frames and various second hand machine , like new , used very little working conditions : Excellent , like new CE regulation : Yes 45° tilting work table possibility of sanding curved pieces using the driven roller + small radius supplementary rollers diam.mm.25-30-35-40-45 mechanical oscillation with a dedicated motor via a connecting rod/crank system Technical data : Worktop mm.280 x 1000 Tiltable worktop mm.300 x 950 Sanding belt development mm.150 x 2580 Driven roller diam. mm.75 Additional worktop mm.300 x 300 Abrasive rolls available diam. mm.25-30-35-40-45 main motor power Hp 4 Motor for oscillation Hp 0.5 Oscillating stroke mm.20 Overall dimensions cm.182x105 H=cm. 150 volt. 380/50 Machine weight kg.400
SPECIFICATIONS: Machinable dimensions: Max. width: 1300 mm Brushes: Ø 250 mm with rotation counter COMPOSITION: 02 incoming side brushes 01 Cross brush unit 01 horizontal brush unit
SPECIFICATIONS: Machinable dimensions: Max. width 1300 mm Installed power: 17 Kw NATURE: 02 incoming side brushes - Ø 250 mm 02 horizontal brushes - Ø 400 mm 02 transverse brushes - Ø 400 mm EQUIPMENT: 02 Inlet/outlet tables
SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh
SPECIFICATIONS: A. Grinding unit with 3 rollers Reel 1 - 85 Shore Reel 2 - 65 shore Reel 3 - 55 shore Max. grinding width mm: 1350 Max. working thickness mm: 170 Diameter of the rollers mm: 250 Extraction system KW 5.5 Sanding belt mm: 1370 x 2620 B. Brush unit with 4 units Unit 1 - transverse, counter-rotating bogies Aggregates 2 and 3 - Longitudinal brushes Unit 4 - counter-rotating bogies Hydra V - PAD electronic control Equipped with 5 motorized Mahros conveyors width mm 1350 for workpiece selection and return
Up-down sander SAC 4R-300 Working width 300mm Working height 2.5-150mm 4 sanding units 2x Bottom unit 2×5.5kW 2x top chiller 2×5.5kW Sweeping brush top and bottom' 2×0.55kw Adjustable feed on the inverter 4-16m/min Electric grinding height adjustment Ability to work in-line with other machines CE Certified Year of production 2001
Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw
calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800
Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
grinding length: 1.000 mmgrinding width: 600 mmworkpiece height: 400 mmControl: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mmtravel cross (z-axis): 540 mmdistance table surface - grinding spindle centre: max. 600 mmTravel vertical (Y-axis): 500 mmMax. working height on new grinding wheel: 400 mmworkpiece table: : Electro permanent magnetic plate: 800 x 500 mmpole pitch: 18 mmclamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/minElectromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mmmeasuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mmElectromechanic ...
Grinding machine for curved elements OMAB/Comec Working width 200mm Sanding belt oscillation Pneumatic pressure of the material Main Motor 5.5kw Feed motor 0.25kw Extraction spigots 2x100mm Machine dimensions 210x80x150cmH Weight 450kg
Key data: 1100 mm, 2
Wide belt grinding machine Manufacturer: Böttcher & Gessner Model: 780 Grinding width 1100mm Aggregates 1x calibration roller 1 x Finishing touches 1 x Cleaning Brush
Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73
SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive
Hey Dear Ladies and Gentlemen, Dear Sirs, Thank you for your enquiry. price 2.690.- EURO EXW Finland We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Edge sanding machine LASM Volpato LBK 160 SN 349177 year 1989 Manufacturer: LASM Volpato Italy Vertical oscillating sanding machine 3.4 kW motor Swivelling table Mechanical swivelling Additional support and "round" sanding discs Suction device Movable platform with wheels Weight 250 kg Technical specifications subject to change Edge sander LASM Volpato LBK 160 SN 349177 Year 1989 Manufacturer: LASM Volpato Italy Vertical Oscillating Grinding Machine 3.4 kW motor Swivel table Mechanical swivel Addit ...
