used Wide belt grinding machines for sale

sanding units: 1. Cross sanding with lamels bet 2. Longitudinal unit with sectional pad 3. Longitudinal unit with lamels belt 4. Cross sanding with lamels bet 5. Brush 6. Cleaning spray nozzless

Wide belt sander Boere TKKC+BKKC 1100 (bottom/top) Technical specifications: Machine type TKKC+BKKC 1100(bottom/top), in good condition, flow processing machine, with through-going feeder in machine. Motors number 6 works above the item, works beneath the item, Sanding width with infinitely adjustable speed 1100 mm Sanding rails 2 Rotating brush cleaner 2 Sanding rollers 2 Calibration milling heads 2 Sanding belt length mm 1900 Passage height max, mm 250 Hardness grade of roller in ° shore 60 Sensing of workpiece thickness mechanical Feedrate max m/min 25 Total connection kW Weight kg 6800 Machine type TKS / BKS, in good condition, flow processing machine, with through-going feeder in machine, number of motors 6, works above the item, works beneath the item, working width 1100 mm, with infinitely adjustable speed, motor size 4x15 Hp, with 2 rollers, 2  ...

I sell a wide belt grinding machine BOERE TKS 1300. Configuration: 95 Sh hard rubber grinding cylinder / engine 18.5 KW Pneumatic adjustable shoe / motor 15 KW Time regulation of the jump and jump of shoe Fashion for veneer / solid wood Feed speed with regulazion Pressure shoes for short elements on each unit. Compressed air clean for shoes. Working height 3-160mm Working width 1300mm. Weight 2900kg Only 7844 moto hours worked. With Dokumentazion Condition very good! Full servis made. Available the same.

Automatic calibration and fine grinding, wide belt grinding machine with electronic segment sanding pad A video of the running machine can be sent on request. Binding machine with combination unit and electronic sectional printing beam Edge segments can be switched on and off Segment width of the pressure beam 50mm Calibration roller smooth steel roller with grain size compensation, automatically infeed Low wear due to steel roller Drive motor 11kW Belt feed with two speeds 4 + 8m/min Feed strap still very grippy, somewhat damaged Maximum grinding width approx. 1100mm Workpiece height approx. 4 to 150mm Common sanding belt dimension 1120 x 1900mm 3 pressure rollers Cleaning brush at the spout Workpiece support with two rollers each at the inlet and outlet Constant working height 900mm due to adjustment of the upper part of the machine, thus also integrable into grindi ...

– after technical inspection – German production – boots with pneumatic jump TECHNICAL PARAMETERS: grinding width 1100 mm .max. grinding height 150 mm Min. element length 600 mm motor power 2 x 15 kW both aggregates with boots pneumatic boots with jump adjustment of the pressure of the boots rubber shafts 70 shor'e pneumatic oscillation cleaning brush tables with auxiliary rollers feed smoothly adjustable feed speed range 4-13 m /min connection diameter 3 x 200 mm dimensions of the machine (L/W/H) 250 x 200 x 210 cm weight ~ 2500 kg

I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.

Offer here a wide belt sanding machine comes from a small carpenter workshop that was closed The machine runs as far as the air lines should be renewed The rubber roller is unfortunately provided with slight injuries but not torn

Technical data/equipment: - Working width 1350 mm, grinding from above, with 2 grinding units: Contact roller unit 15 kW with calibration device and height-adjustable contact roller 65° Shore Combined contact roller pressure shoe unit, drive power 11 kW, with higher adjustable contact roller 85° Shore and through the workpiece electr.pneum. controlled air cushion pressure shoe - Sanding belt dimensions W x L 1360 x 1,900 mm - Cleaning brush in the spout - Belt feed device, speed 3-15 m/min - Roller table in the inlet - Display of workpiece thickness - Air requirement machine control 60 NL/min - Suction nozzle Ø 3 x 200 mm - Extraction capacity 7,600 - 8,200 m³/h, Machine resistance 800 Pa - Total connection value 28 kW (380 V, 50 Hz) - autom. Star-triangle start-up - Braking device - pneum. Strip tension - optical airless belt control - pneum. spring-loaded centre ...

Bütfering Classic 111 E + Lack Broadband calibration fine grinding machine Constant working height / head infeed Operator terminal with 50 program presets and plain text display combined steel contact roller sanding pad unit CPS electronically controlled sectional sanding shoe unit PLC-controlled adjustment of the grinding pressure Working width 1100 mm Main engine 11 kW PAINT SANDING PACKAGE: Vacuum table with blower Stepless feed carpet 2.5 - 13 mm/min. Infinitely variable abrasive belt speed via converter control E - Sanding pad CPS with TLG 25 mm Pneum. Sanding belt cleaning Cleaning brush unit additional. compact roller table in the inlet and outlet Machine from training workshop Machine is WORKSHOP OVERHAULED in TOP CONDITION

Automatic calibration and fine grinding, wide belt sanding machine with electronic segment sanding shoe and top equipment, only 379 Bh A video of the running machine can be sent on request. Single-belt machine with combination unit and electronic link pressure bar Edge segments can be switched on and off Segment width of the pressure beam 25mm, therefore very suitable for lacquer sanding Calibration roller grooved steel roller with grain compensation, automatically deliverable Low wear due to steel roller Drive motor 15kW, infinitely variable via frequency converter from 2 - 18m/s Webbing feed infinitely variable via frequency converter adjustable from 2.5 - 13m/min Feed belt has been renewed Maximum grinding width approx. 1100mm Workpiece height approx. 4 to 150mm Gaeng sanding belt dimensions 1120 x 1900mm 3 rubberized pressure rollers Cleaning brush at the outlet, wi ...

Wide belt sanding machine Bütfering Type: MA2W1100 Year of construction: 1983 Grinding width 1100 mm 2 grinding units Grinding roller motor power 15 kW and Sanding shoe motor power 15 kW With driven cleaning brush motor 0.55 kW Feed with 2 speeds 10 and 20m/min. Feed motor 1.8 kW Vacuum transport carpet complete with fan Constant table The complete machine upper frame is moved via four trapezoidal threaded spindles. Sanding belt width 1110 mm Sanding belt length 1900 mm Workpiece thickness maximum 150 mm Total connected load 35 kW Industrial version Suction connections 2 x 200 mm, 1 x 160 mm diameter Weight approx. 3.800 kg Dimensions 2500 mm x 1750 mm x H 2000 mm

Bütfering Optimat SBC 113 C CONSTANT TABLE MACHINE / AUTOM. Headlining: Broadband calibration fine grinding machine Auto. Steel contact roller unit CPS electronically controlled limb sanding shoe Working width 1350 mm PLC screen control terminal for various work programs Feed speed infinitely variable 2.5 - 3 m/min. Motor power 15 kW RTE additional compact roller table in the inlet RTA additional compact roller table in the outlet Machine is WORKSHOP OVERHAULED in TOP CONDITION

Automatic calibration and fine grinding, wideband sanding machine with electronic segment sanding shoe and top equipment, only 1323 Bh A video of the running machine can be sent on request. Single-belt machine with combination unit and electronic link pressure bar Edge segments can be switched on and off Segment width of the pressure beam 37mm, therefore very suitable for lacquer sanding Calibration roller grooved steel roll with grain compensation Low wear due to steel roller Drive motor 15kW, infinitely variable via frequency converter from 2 - 18m/s Webbing feed infinitely variable via frequency converter adjustable from 2.5 - 13m/min Feed belt has been renewed Maximum grinding width approx. 1350mm Workpiece height approx. 4 to 150mm Gaenige sanding belt dimensions 1370 x 1900mm 3 rubberized pressure rollers Cleaning brushes at the outlet Belt blow-off device workpi ...

Working width: 1.100 mmNumber of sanding units: 1 st.Workpiece thickness max.: 160 mmsanding belt measurements: 2.150 mmFeed motor: 1 kWFeed speed: 2,5 - 12,5 m/min.Weight: 2.600 kgoutput: 15 kw: 3.400 m³/hDimensions (L/W/H): 1.825 x 1.725 x 2.185 mm: Ja : Ja : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: grinding width: 1350 mm grinding belt width: max. 1370 mm grinding belt length: 2150 mm workpiece thickness: max. 160 mm feed rate: 5 and 10 m/min unit 1: 15 kW, unit 2: 11 kW, dimensions (l x w x h) approx.: 2,740 x 2,100 x 2,400 mm, weight approx.: 4,000 kg

Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad

On offer: A very good wide belt grinding machine. Specifications: Year of construction: 2016 Weight: 1160 Kg Dimensions: 1650 mm x 1820 mm x 1940 mm Grinding width: 1100 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm workpiece height: 170 mm Min. workpiece height: 4 mm The machine is immediately available. A forklift is available for charging - > fast and uncomplicated processing!

Description: • Wide belt sanding machine • Serial number 5953NOVA • Total installed power 30 KW • Sanding width approx. 1320 mm • Workpiece thickness from 4 mm up to 160 mm • Motorized height positioning with digital reader • Device for automatic positioning of the table according the required thickness • Vacuum transport belt, CIMME GCH 005020 vacuum unit with 5.50 KW motor • Belt conveyor with variable feed speed from 3 m/min up to 18 m/min • Feed motor power 2.20 KW • Aggregate 1:electronic sectioned sanding pad, motor power 11 KW, with blowers • Aggregate 2:electronic sectioned sanding pad, motor power 11 KW, with blowers • Dimensions for transport 3200 x 2440 x 2380 mmdimensions (l x w x h) approx.: 2,080 x 2,440 x 2,380 mm, weight approx.: 2,700 kg

Roadler CIT MECCANICA model BECKER 150: - useful belt width from 30 to 150mm - tooth pitch from 10 to 55mm - feed 80 teeth/min - motor kw 0,13 - machine to CE standards

- Manufacturer Costa -Type. 80 CT 1350 - Year of construction 1996 - Working width 1,350 mm - 1st aggregate: - Longitudinal strip - Sanding roller 30 Shore - Engine power 15/17 kW - 2nd aggregate: - Electronic sanding shoe, Costa system - Engine power 15/17 kW - Parts dedusting by rotating air nozzles system Uniblower - Control panel on the right - Program control via screen input PC control - Height adjustment motorized - Vacuum conveyor belt - Total connection 44 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5

COSTA wide belt grinding machine for grinding thin veneer / thin fabric / sheet materials and composite materials - as well as grinding thin material on rolls. Machinery: 1. Aggregate steel contact roller D=250 mm, sanding belt motor 22 KW, sanding belt speed 20 m/sec., direction of rotation switchable to synchronization and counter-rotation, sanding belt cleaning 2. Aggregate rubberized contact roller 80°shore, D= 250 mm, sanding belt motor 18 KW, sanding belt speed 20 m/sec., direction of rotation switchable to synchronous and counter-rotation, sanding belt cleaning 3. Aggregate rubberized contact roller 50°shore, D= 250 mm, sanding belt motor 15 KW, sanding belt speed adjustable via frequency converter 3 - 20 m/sec., direction of rotation switchable to synchronous and counter-rotation, sanding belt cleaning • Grinding width max. 1350 mm • Grinding height min. 0 ...

Wide belt grinding machine Danckaert E 527 - S 81894 Grinding width 1120 mm Combination unit: contact roller / sanding shoe Carpet needs to be replaced Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Wide belt sanding machine Danckaert E712-S33478 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm wei ...

Description: • Varnish wide belt sanding machine • Serial number 811635 • Total installed power approx. 16 KW • Sanding width 1100 mm • Workpiece thickness from 3 mm up to 160 mm • Motorized height positioning • Belt conveyor with variable feed speed • Feed motor power 0.75 KW • Aggregate 1: rubber sanding roller with diameter approx. 140 mm, hardness approx. 15 Shore, motor power 7.50 KW, with blowers • Aggregate 2: rubber sanding roller with diameter approx. 140 mm, hardness approx. 10 Shore, motor power 5.50 KW, with blowersdimensions (l x w x h) approx.: 1,730 x 2,350 x 2,410 mm, weight approx.: 4,000 kg

CATALOG NUMBER 6145 TECHNICAL DATA - max workpiece width 1100mm - max workpiece height 140mm 3 aggregates: 1) grooved rubber roller for 15kW calibration 2) grooved rubber roller for 11kW calibration 3) grooved rubber roller for 11kW calibration in advance: - metal skid roller - rubber skid roller - aggregate - 2 rubber rollers, sliding - aggregate - 2 rubber skid rollers - aggregate - rubber skid roller from down: - feeding table 3600x1000mm - feed speed adjustable on the inverter 0.25kW - pulling tape - 3 rubber rollers, sliding, leading out - oscillation of pneumatic strips on photocells - blowing off the tapes - electric table lifting - 0.75kW motor lifting - smooth regulation of the feed speed - 2.2kW feed motor - with a vacum pump - 4kW pump motor - diameter of the extraction port 110mm, 80mm - working pressure 6-8bar - diameter of the extraction port 3 ...

Wide belt sander GIANTWAY XSG 1300 R-RP Working width of 40 1300 mm - min. / max. clearance height 2.5 / 100 mm - speed infinitely variable 4 - 24 m / min. -1 grinding unit:-motor 30 kW / 400 V - belt speed 19.5 m/sec - 2. sanding unit - motor 22 kW / 400 V - belt speed 16 m/sec -Bursteaggregat - engine - 0,37 KW -Motor feed 5.5 kW - motor height adjustment 0.37 kW - pneumatic 8 bar - air consumption 0, 5 m 3/min - digital display with automatic workpiece thickness setting rubber transport carpet automatic star / Delta starter circuit - pneumatic belt tension - about thick backup using the self-timer - amperemeter for the monitoring of cut - immediately-stop with disc brake fault - pneumatic belt cleaning - CE standard

Grinding machine Heesemann FGA 6 Technical specifications: Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Elektronik control : yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Segment sanding shoe: 40, Brushing unit: yes, Year :1989

- very good condition - year of manufacture 1993 - Heesemann electronic PLC control - model / type LSM 6 TECHNICAL PARAMETERS: working width of grinding 1350 mm thickness max. ground elements 150 mm MACHINE CONFIGURATION: I- cross-cross aggregate with sequential electronic pressure main engine 13 KW pneumatic oscillation of the photocell extraction output 1 x 180 mm grinding belt size 5480 x 150 mm II- combo unit with boot main engine 13 KW grinding belt cleaning system with oscillation shoe with pneumatic clamp pneumatic oscillation of the photocell extraction output fi.1 x 180 mm grinding belt size 2620 x 1350 mm PNEUMATIC OSCILLATION OF THE PHOTOCELL pneumatic strip system with oscillation cleaning tapes III- combo unit with boot main engine 13 KW grinding belt cleaning system shoe with pneumatic clamp output to the extractor fi. 1 ...

Grinding width mm 1300 Grinding units total 6 Ribbons 4 Grinding rollers 1 Steel roller Segment grinding shoe electronic Paint intermediate grinding Vacuum table Table height constant Grinding belt length mm 2620 Further technical data Machine control HEESEMANN SMA PC11/40 Oscillation HEESEMANN CSD Turning direction reversal Ionizing device Workpiece thickness min mm 3 Pass-through height mm 80 Grinding shoes total 1 Segment width mm 16 Grinding brush unit Roller grinding brushes Cleaning brush dust removal machine Main motor kW 31 Band speed max m/s 24 Grinding belt swarm. adjustable infinitely variable Feed max m/min 28 Feed Stepless Blow-off device grinding belt Segment control electromagnetic Aggregates frequency-controlled 5 Cross-bands adjustable infinitely variable Aggregate configuration w-q-s-q-q-q-b Pressure lamella rim unit transverse  ...

Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet

Heesemann wide belt grinding machine Fabr: Heesemann type: MFA 8-CC YEAR: 1997 Working width: 1300mm Longitudinal grinding regatta: 11kW Shoe motor: 11kW Shoe motor: 11kW Brush with vacuum carpet

Description: machine number 502, working width approx. 1100 mm, packages sanding unit shoe, with sanding belts, sanding belt dimensions 1120 x 1900 mm, infeed and outfeed roller table, feed approx. 7/11/15 and 20 mm/mindimensions (l x w x h) approx.: 2,700 x 2,200 x 1,700 mm, weight approx.: 1,200 kg

Houfek Bulldog 630 C wide belt sander - after technical review - very good condition - Year of manufacture 2005 TECHNICAL PARAMETERS: grinding width 630 mm grinding height 3 mm - 160 mm electric height adjustment two types of feed speed 5 - 10 m/min automatic thickness setting shoe main engine power 7.5 kW pneumatic oscillation pneumatic belt tension minimum element length 400 Spigot Diameter 140 mm machine dimensions (length/width/height) 155 x 130 x 220 cm weight 800 kg

Machine number: 1051 Power: 16.5 kW, 50A Weight: 1200 kg

working width 1100mm calibration unit in metal shaft combo unit with rubber shaft pneumatically shot shoe material measuring system pneumatic oscillation pneumatic belt tensioning two-stage feed speed control year of manufacture 2003 total power 23,5kW Ce weight 1600kg power supply 380V

Kündig ENORM DUO-FL 110 Broadband calibration fine grinding machine 1. Grinding unit with contact roller DM 200 mm 90° Shore 2. Grinding unit - pneum. controlled sanding pad unit FL machine table FIXED/FLOWING with thickness compensation Working width 1100 mm Feed speed 5 - 18 m/min infinitely variable Motor power grinding unit approx. 18 kW Auto. Workpiece dimension mech. DIGITAL Clear control panel for autom. Control with program selector switch additional roller table in the inlet and outlet Sanding pad for polished veneer Machine is FUNCTIONAL Swiss quality product from a handicraft business From joinery net € 15,000.00

Wide-belt sander Levigaltecnica Mikro 1000/C Working width 1000mm 1 grinding unit Combi unit with 9kw boot Main engine power Two feed speeds Electric lifting and lowering of the table top Optical oscillation Total power 10kw Grinding belt dimension 2150x1030mm Weight 1150 kg

Code: 0164 Brand: NATRIBOM Model: LEAS/300 Wide belt sander with 1 belt (Roller) for solid wood, veneer. panels, thin strips of wood, and various materials Max working width mm. 300 Max working hegiht mm. 150 N°1 Roller in rubber diam mm 240 Main motor power Hp 7,5 Belt feed speed variator Belt size mm 2500 x 340 Overall dimensions: mm 1530 x 870 x 2100 h Weight kg 550

– after technical inspection – very good condition – German production – year of production 1996 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe aggregate motor power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft engine power 0.75 kW shaft oscillation Unit with cleaning brush engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 200 x 245 x 210 cm weight 2500 kg 1. The Alpha Combi unit is a grinding unit with a contact shaft with a di ...

– German production – year of production 1995 – segmented shoe - the perfect solution for varnish / veneer TECHNICAL PARAMETERS: grinding width 1100 mm grinding height 1-150 mm Combo unit with task-controlled membrane grinding shoe: aggregate engine power 11 kW blowing on the tape pneumatic oscillation two types of belt speeds of 4.5 and 18 m/s Aggregate with felt shaft, with oscillation: engine power 0.75 kW shaft oscillation Unit with cleaning brush: engine power 0.75 kW smoothly adjustable feed feed speed range 4-18 m/min feed motor power 1.5 kW electric height adjustment vacuum table fan motor power 3 kW connector diameters 4 x 120 mm, 1 x 150 mm transport dimensions (L/W/H) 210 / 250 / 220 cm weight 2500 kg – The Alpha Combi unit is a grinding unit with a contact shaft with a diameter of 140 mm and a hardness of 90 s ...

Grinding width 1100 mm. Grinding height min./max. 3 - 160mm. 1 combination grinding unit with contact roller fi 150mm. (90 shore) Belt speed 3-18 m/min. (infinitely variable control) 2 speeds of sanding belt 4.5 / 18 m / s. Speed 4.5 m / s. (paint intermediate grinding) removable shoe hard / segment grinding shoe with optical reading Main motor power 11 kW (connection 17.6 kW) Weight 2200 kg

ORDER NO. 6556 TECHNICAL DATA - max width of the workpiece 1100mm - max height of the workpiece 160mm 2 aggregates: 1) corrugated rubber roller for calibration 2) pneumatic shoe +2 metal rollers in advance: - 2 rollers, metal, slip - pressure - aggregate - 2 slip metal rollers - aggregate - 2 rollers, metal, slip - cleaning brush bottom: - 2 rubber rollers, slip rollers - pulling tape - oscillation of pneumatic tapes on photocells - lifting the electric table - 2 types of feed speed - working pressure 8-10bar - diameter of the extraction connection 2x200mm - total power 30kW - overall dimensions L/W/H 2230x2020x2050mm - weight about 3000kg Net price: 25900 PLN Net price: 5756 EUR depending on the price 4,50 EUR (Prices are subject to change with higher fluctuations)

Wide-belt sander Paoloni Kalibra 10 Model K10 RKRT Working width 930mm Two grinding units 1.calibration shaft 2.combo unit with boot Optical oscillation Two feed speeds electric lift up-down Digital height reading Main engine power 11kw Total power 13kw Year 2004

Part Number 6346 TECHNICAL DATA - max width of the workpiece 1300mm - max height of the workpiece 110mm - min workpiece length 370mm - max length of the workpiece any - 2 upper grinding units in advance: - pressure roller, slip roller, rubber - grinding unit - pressure roller, slip roller, rubber - grinding unit - element feed speed 5m/min bottom: - pulling tape - manual setting of grinding height - spindle length 1300mm - number of spindles 2 pcs - tool diameter 300mm - feed motors 0,37kW - main motors: 2×2,2kW - diameter of extraction connectors 2x130mm - overall dimensions L/W/H 2060x1700x1740mm - weight 650kg – machine for finishing grinding and between the varnish grind – Italian production – very good condition – unpainted, – used grinder Net price: 32 900 PLN Net price: 7 563 EUR depending on the price 4,35 EUR (Prices may f ...

working width 600mm calibration unit with metal shaft pneumatic oscillation electric table adjustment electronic measurement of material height motor 7,5kW power supply 380V

working width 1000mm calibration unit with metal shaft pneumatic oscillation electric table adjustment electronic measurement of material height 11kW motor power supply 380V

Description: machine number TO 1508-10, working width approx. 1100 mm, combined grinding unit with profiled contact roller and grinding shoe, front and rear roller tabledimensions (l x w x h) approx.: 2,300 x 2,300 x 2,600 mm, weight approx.: 1,500 kg

Description: Working width 1300 mm, passage height 140 mm, feed speed 7 & 14 metres per minute, sanding belt dimensions 1900 x 1330 mm, with various sanding belts partly unuseddimensions (l x w x h) approx.: 2,100 x 2,100 x 1,900 mm, weight approx.: 4,000 kg