used Belt grinders for sale

SPECIFICATIONS: Working area: 2400 x 800 mm Height adjustment: 550 mm Installed power: 3 Kw Vertical travel speed Max. belt length: 6650 mm Pulleys: Ø 200 mm

Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

SPECIFICATIONS: Installed power: 5.5 kW 2 flywheels Ø 450 mm Sanding belt length: 4900 mm 2 speed settings

width of the strips: 150 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,6 kWweight of the machine ca.: 138 tdimensions of the machine ca.: 995 x 490 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/s: 75 x 540 mmtotal power requirement: 3 kWweight of the machine ca.: 90 kgdimensions of the machine ca.: 995 x 415 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Pictures and videos were taken at the customers site before dismantling on June 9th, 2024.The machine has now been dismantled and stored at the customers site and is ready for shipping.Description:---------------------------------Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated stiffeners for optimalvibration damping.Offset grinding units with large-dimensionedbelt drive drums for slip-free belt running. Two-point extraction for directand fly dust extraction with integrated blow-off device. Grinding unitsin heavy steel plate construction as the basis for vibration-damped,smooth belt running. All guides as ball linear sets on hardened andground shafts. L ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

width of the strips: 75 mmband length: 2000 mmband speed: 37 m/mintotal power requirement: 3 kWweight of the machine ca.: 110 Kgdimensions of the machine ca.: 1x0,5x1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bench belt sander Höfer Motor 4.2KW format 2.50 x 1.20 meters

Belt grinding machine for wood & metal, roller spacing approx. 3000 mm

Number of sanding units: 4 St.sanding width: 190 mmSanding height max.: 180 mmControl: ja weight: 3300 kgDimensions (L/W/H): 2600x920x1890 mmDust suction hood: 2x180 2x120 mmDouble sided grinding machine Löwer DSM 2004Double-sided four-band single-wood sanding machine for sandingSolid wood, e.g. Window wood etc.Highly stable top model with innovative details. Suitable for highContinuous load even at higher chip removal rates.- Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below1. Belt sanding unit with heavy steel roller2. Belt sanding unit with rubberised roller and shoe3.Finish aggregate with fiber brush- Direct driven wheels for slip-free power transmission- Maintenance and wear-free CERMET-coated sanding shoes with very good thermal conductivity and absolute dimensional accuracy- Foreign cooling of the grinding zones ...

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (length / width): 3065x1600x1900 mmweight of the machine ca.: 1500 kgLöwer Leistomad SDWindow single wood intermediate sanding machine---------------------------------Machine factory tested by Löwer!Automatic fine grinding machine for wood grinding (smoothing, defibering andEdge breaking) or intermediate sanding of profiled window bars. With soft discTechnology for the visible surfaces as well as automatically safe profile andWidth adjustment.- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- 1 softisc unit Ø=200mm above 0.75kW,- 1 slat roller unit L=200mm above 0.75kW- 1 soft disc unit Ø=200mm below 0.75kW,- 1 lamella roller unit L=200mm below 0.75kW,- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- Linear guidance of all grinding units via linear ball  ...

Number of sanding units: 8 st.sanding width: 150 mmMachine can be inspected during production!Leistomat - Finisch and intermediate leveling machine Löwer LZ 8-------------------------------------------------- -------------------for finish sanding (smoothing, defibering and edge breaking)or intermediate sanding profiled window latch- Finish and intermediate sanding machine with eight sanding blade aggregates,2 surface units at the top (synchronism / counter-rotation)2 surface units below (synchronism / counter-rotation)4 profile units with angled arrangement top right,bottom right, top left, bottom left, all mating- linear guidance of all grinding units overLinear ball bearing sets on hardened shafts- Timed immersion of all in the opposite directionrotating grinding units directly above the incomingWorkpiece edges to avoid looping through thePrimer in the front edge area. By theIt is pos ...

Code: 0198 Brand: MABO - ITALY Model: DELTA - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials - CE Standard Table length mm 3000 Table width mm 800 Automatic table lifting - Vertical stroke mm 550 Motor 2 speeds rpm 1400/2800 - Hp 3/4 Pulley diameter mm 200 Suction motor Hp 0,5 Emergency rope Suction mouth diameter mm 120 Overall dimensions mm 4400 x 1100 x 1550 h Weight kg 420

SPECIFICATIONS: Horizontal belt grinding machine Table width mm: 800 Table length mm: 2,900 Sanding belt width mm: 1,500 Sanding belt length mm: 8,000 Maximum working height mm: 600 Power of the main engine HP: 4 With sanding shoe

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/s: 75 x 540 mmtotal power requirement: 3 kWweight of the machine ca.: 90 kgdimensions of the machine ca.: 995 x 415 x 890 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale second hand sanding maschine steinemann. Up and down paper, super wide, 200kw. 1990 yc. Short used.