grinding machines wood used for sale (650)

Belt/ozilierend swiveling Roll in the table

CALIBRATING MACHINE Mod. SAC SUERI CLS 1150 max. working width mm.1150 1 tape: roller diam. mm.300 Engine power hp 20

CALIBRATING SANDING machine model LC 220 second hand machine volt.380/50 n.1 calibrating roller motor power Hp 6 carpet feed ( 2 speed ) motor power Hp. 0,5 / 0,75 max. working width mm. 220 max. working heigth mm. 150 belt dimension mm. 2020 x 240

5.5kw, Automatic star/triangle switch. Equipped with rubber sanding roller grooved 110 x 410 mm, with sanding slipper covered with graphite linen 70 mm wide and a roller 90 x 410 mm. Sanding table automatically high and low with digital readout. Rubber conveyor belt speed continuously adjustable. With a ball-bearing pull-out support guide, which is 350 mm extendable. With extra supply and discharge rollers, 2 pieces per side. With thermal motor protection. Machine wide 1380 mm High 1650 mm Deep 700 mm. Auction-ID: A1-48994-18

2.2 kw, Sanding belt 150 x 3200 mm Support sheet with a point extraction, removable, large sanding roll 200 mm with extractor hood. Small sanding roller 100 mm with small sanding table Sanding belt is decorative in height Adjustable in height from 10 to 150 mm. With thermal protection. Auction-ID: A1-48994-31

Year & Manufacturer: 1998 – Viet Spa ItaliaPower: 18 kWWorking parameters: belt width 1340 mm; air pressure 5–8 barEquipment included: feed conveyor; suction unit/fan with hosesPower supply: 380 V / 50 Hz / 41 ADimensions (mm): 2730 × 1970 × 2300Weight (kg): 2700Notes: Challenge model 113 EL-TM. Serial no. 4203094. Viet LCDCS control. Used machine. Auction-ID: A1-50001-50

2.0 Kw and 935 rpm, Polishing brush d= 300 mm and a polishing width of 250 mm with 6 sanding zones where 250 mm wide emery cloth is rolled up. With an inflatable sanding drum Of D=340 mm and a width of 250 mm with a roller adjustable under a roller for a sanding belt of 250 mm. With extractor tray. Auction-ID: A1-48994-25

4kw, 1400 rpm, Sanding table 1200 x 2500 mm, Maximum sanding height 400 mm, sanding belt 150 x 6900 mm, Run-point sanding belt reversible, Sanding wheels 300 x 160 mm, adjustable stop, lighting LED bar, Separately included: dust extraction unit connectable to the machine, Without dust bag, With corresponding 3-way manifold. Auction-ID: A1-48994-15

Motors 18.5, 11 Kw and 1.8 Kw, Automatic star/triangle switch. With emergency stop at the front and rear of the machine. 1st Steel roller 160 mm x 1140 mm ribbed. 2nd hard rubber roller 160 x 1140 mm ribbed. 3rd sample roll - sanding shoe 70 mm wide x 1140 with graphite linen - sample roll. Electric high low with fine-micro adjustment, sanding height from 3.3mm to 161 mm. Conveyor belt infinitely adjustable from 3 m/minute to 15 m/minute. With pneumatic conveyor belt control. Transport belt still roughened in April 2026. 2nd hard rubber roller also made purely flat. With ENORMATIC system this is an automatic thickness sensing system. This automatically senses the thickness of the wood and adjusts the machine accordingly with a predetermined sanding thickness decrease. With 3-way manifold for extraction. Adjustment switch for sanding only with steel roller or only s ...

Year & Manufacturer: 2006 — Chambon Power supply: 400 V Power: 24 kWWorking parameters: Working width 1350 mmParts capacity: Wide belt sander for wood panels and partsIncluded equipment: Inlet/outlet table, suction, electrical box, roller conveyorCompliance: CE Auction-ID: A1-50001-22

2.2 Kw. With thermal protection. Sanding belt 150 x 3200 mm. Support sheet with a point extraction, removable, large sanding roll 200 mm with extractor hood. Small sanding roll 100 mm. The sanding belt is oscillating in height. And the sanding belt is adjustable in height from 10 to 150 mm. The sanding table is made of a plane with three extraction points, all three equipped with a removable extractor hood. Three-way manifold belongs to machine. 3x extra sanding belt included Equipped with shaving hand sander, Type MB2, 380 volts, 1500 watts and a speed of 1410 rpm, Sanding belt 100 x 860 mm. With sanding table that can be swiveled away. Auction-ID: A1-48994-16

Auction-ID: A1-40897-255

HYUNDAI multi-sander - 220 W - palm sander delta - with dust collection box and 6 pieces of sandpaper Auction-ID: A1-40897-226

- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19

230V - 3000W 17.4A Speed 2840 rpm Complete with 8 new sanding belts. In working order. Auction-ID: A3-46152-6135

Auction-ID: A1-48377-25

Technical data Manufacturer: F. Zimmermann GmbH, Denkendorf/Esslingen Type: PS 1/2 Machine Type: Vertical Belt Grinder Power: 1.35 kW Voltage: 380 V Frequency: 50 Hz Configuration Large work table with sanding belt feed-through Adjustable strap guides Control panel with switching levels I/II, left/right rotation, stop button and emergency stop Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-24

Auction-ID: A1-49727-87

ARMLÄNDER Polishing/Buffing Machine Auction-ID: A1-49712-15

Auction-ID: A1-48648-44